Thermomechanical behavior of PA6.6 composites subjected to low cycle fatigue
Source abstract
Abstract
Abstract In this study, manifold experiments were conducted to investigate the thermomechanical behavior of short E-glass fiber-reinforced polyamide 6.6 composites subjected to low cycle fatigue loadings. Different hygrometric states, fiber configurations and loading rates were considered. Mechanical, thermal and energy responses of composite specimens were recorded using photomechanic techniques. The influence of water content, fiber orientation and loading rate on these thermomechanical responses was systematically analysed. The mechanical findings indicated that the ratcheting phenomenon was more pronounced for humid composites reinforced with fibers oriented transversely and subjected to a low loading rate. Moreover, the order of magnitude in self-heating was greater for transversal fiber composites conditioned at high relative humidity and subjected to a 10 Hz loading rate. From a thermodynamic standpoint, we also noticed that high proportions of the mean stored energy rate were obtained at a high loading rate, with values exceeded 64%. These values were noticeably altered by the water content and fiber angles, i.e. lower as the relative humidity increased and higher as the fiber angles increased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Response to Dynamic Loads · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Modelling the influence of temperature and relative humidity on the time-dependent mechanical behaviour of a short glass fibre reinforced polyamide10.1016/j.mechmat.2012.08.008 ↗
2. Erhard · 2006
3. Moisture absorption by various polyamides and their associated dimensional changes10.1002/app.27057 ↗
4. Cyclic behaviour of short glass fibre reinforced polyamide: experimental study and constitutive equations10.1016/j.ijplas.2011.02.005 ↗
5. Multiscale fatigue damage characterization in short glass fiber reinforced polyamide-6610.1016/j.compositesb.2014.01.019 ↗
6. Influence of relative humidity and loading frequency on the PA6.6 cyclic thermomechanical behavior: Part I. Mechanical and thermal aspects10.1016/j.polymertesting.2014.09.019 ↗
7. Sperling · 1992
8. Principles of polymer systems
9. Surface glass transition temperature of amorphous polymers. A new insight with SFM10.1021/ma011326a ↗
10. Kinetics of stored and dissipated energies associated with cyclic loadings of dry polyamide 6.6 specimens10.1016/j.polymertesting.2014.01.009 ↗
11. Fiber orientation effects on heat source distribution in reinforced polyamide 6.6 subjected to low cycle fatigue
12. In situ damage mechanisms investigation of PA66/GF30 composite: effect of relative humidity10.1016/j.compositesb.2013.11.001 ↗
13. Influence of the fibre/matrix interface on ageing mechanisms of glass fibre reinforced thermoplastic composites (PA-6,6, PET, PBT) in a hygrothermal environment10.1016/j.polymdegradstab.2009.04.009 ↗
14. Effect of frequency upon fatigue strength of a short glass fiber reinforced polyamide 6: a superposition method based on cyclic creep parameters10.1002/pc.20543 ↗
15. Mechanisms of fatigue in short glass fiber reinforced polyamide 610.1002/pen.10671 ↗
16. Seignobos · 2009
17. The heat developed during plastic extension of metals
18. The latent energy remaining in a metal after cold working
19. Williams · 1967
20. Leach · 1970
21. Energy balance for elastic plastic deformation at finite strain (in French)
22. Plastic and dissipated work and stored energy10.1016/0029-5493(89)90110-6 ↗
23. Experimental analysis of energy storage rate components during tensile deformation of polycrystals10.1016/j.msea.2003.12.056 ↗
24. Determination of the plastic work converted to heat using radiometry10.1007/BF02327503 ↗
25. Partition of plastic work into heat and stored energy in metals10.1007/BF02325036 ↗
26. Fields of stored energy associated with localized necking of steel10.2140/jomms.2009.4.245 ↗
27. Heat sources, energy storage and dissipation in high-strength steels: experiments and modelling10.1016/j.euromechsol.2009.11.005 ↗
28. Study of the intrinsic dissipation associated to the plastic work induced by a ball impact10.1016/j.ijthermalsci.2004.07.001 ↗
29. Energy storage during the tensile deformation of armco iron and austenitic steel10.1016/0025-5416(85)90274-5 ↗
30. A thermodynamic internal variable model for the partition of plasticwork into heat and stored energy in metals10.1016/S0022-5096(99)00048-4 ↗
31. Experimental energetic balance associated to the deformation of an aluminum multicrystal and monocrystal sheet10.4028/www.scientific.net/MSF.467-470.1395 ↗
32. Stress-strain curve and stored energy during uniaxial deformation of polycrystals10.1016/j.euromechsol.2008.06.003 ↗
33. Arif · 2014
34. Calorimetric analysis of polymer behaviour using a pixel calibration of an IRFPA camera10.3166/qirt.2.153-171 ↗
35. Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels10.1016/S0142-1123(03)00171-3 ↗
36. Use of full-field digital image correlation and infrared thermography measurements for the thermomechanical analysis of material behaviour10.1111/j.1475-1305.2009.00635.x ↗
37. An infrared image processing to analyse the calorific effects accompanying strain localization10.1016/S0020-7225(00)00002-1 ↗