Effect of oxygen plasma-treated carbon fibers on the tribological behavior of oil-absorbed carbon/epoxy woven composites
Source abstract
Abstract
In this study, woven type carbon fibers were plasma-treated using oxygen gas, and the effect of the plasma treatment on tribological behavior of oil-absorbed carbon/epoxy woven composites was investigated. Chemical changes on the surface of the woven carbon fibers due to oxygen plasma treatment were determined by XPS analysis. Ball-on-disk wear tests were performed on untreated and plasma-treated carbon/epoxy woven composites that were fully oil absorbed. It was found that carbonyl functional groups were created on the carbon fibers due to oxygen-plasma treatment. In addition, the friction coefficient and wear rate of the plasma-treated carbon/epoxy composites were lower than that of untreated carbon/epoxy composites. SEM examination of the worn surface showed that the improved wear properties of the plasma-treated carbon/epoxy composites were attributed to enhanced adhesive strength, caused by the carbonyl functional groups between the carbon fibers and epoxy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Fiber-reinforced polymer composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Wear characteristics of carbon-phenolic woven composites mixed with nano-particles10.1016/j.compstruct.2005.03.010 ↗
2. Tribological properties of three-dimensional braided carbon/Kevlar/epoxy hybrid composites under dry and lubricated condition10.1016/j.msea.2006.11.090 ↗
3. Influence of weave of carbon fabric in polyetherimaide composites in various wear situations10.1016/j.wear.2006.12.030 ↗
4. Improved wear and mechanical properties of UHMWPE–carbon nanofiber composites through an optimized paraffin-assisted melt-mixing process10.1016/j.compositesb.2010.09.006 ↗
5. Friction and wear characteristics of carbon–epoxy and glass–epoxy woven roving fiber composites10.1177/0731684406063540 ↗
6. Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under dry sliding conditions10.1016/j.wear.2005.06.007 ↗
7. The effect of surface modification on the friction and wear behavior of carbon nanofiber-filled PTFE composites
8. Tribological properties of PTFE composites filled with surface-treated carbon fiber10.1007/s10853-007-1767-7 ↗
9. Effects of carbon fiber surface treatment on the friction and wear behavior of 2D woven carbon fabric/phenolic composites10.1016/j.colsurfa.2009.01.005 ↗
10. Carbon fabric reinforced polyetherimide composites: influence of weave of fabric and processing parameters on performance properties and erosive wear10.1016/j.msea.2006.01.090 ↗
11. Effect of carbon fiber surface treatment on the tribological properties of 2D woven carbon fabric/polyimide composites10.1007/s00339-009-5073-x ↗
12. The effect of fiber oxidation on the tribological behavior of 3D-braided carbon fiber/nylon composites10.1016/j.wear.2006.10.003 ↗