Analytical assessment of the bearing capacity of RC beams with corroded steel bars beyond concrete cover cracking
Source abstract
Abstract
Abstract Corrosion of steel reinforcement is one of the major causes that limit durability and serviceability performance of reinforced concrete (RC) structures. This paper reviews thoroughly available experiments and analytical approaches in the relevant international literature and introduces a calculation model for assessing steel bar mass loss and contributes to further utilization of common in-situ inspections from a structural point of view. The model is based on the width of longitudinal crack of concrete cover, as a function of cover depth, bar diameter and mechanical properties of concrete. The model includes the well-known relationships for the steel mass loss during the first phase of rust formulation, filling the porous zone as well as during the phase that the radial pressure exceeds the concrete strength and causes cover cracking. The assumption followed herein for the flexibility of cracked concrete allows for the estimation of steel bar corrosion rate even beyond concrete cover cracking, by visual mapping of the width of longitudinal cracks. Then, the corresponding flexural capacity of the beams at yield and at maximum may be assessed. The predictions of the model are validated against 51 non-strengthened corroded beams and 24 strengthened corroded beams with Fiber Reinforced Polymer (FRP) materials published in the international literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Structural Behavior of Reinforced Concrete · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Modeling the time-to-corrosion cracking in chloride contaminated concrete structures
2. Factors controlling cracking of concrete affected reinforcement corrosion10.1007/BF02480466 ↗
3. Assessing structural conditions of concrete structures with corroded reinforcements. 4th Int. Congress on concrete in the service of mankind
4. Analytical model for corrosion-induced crack width in reinforced concrete structures
5. Concrete cover cracking with localized corrosion of reinforcing steel
6. Analyzing crack width to predict corrosion in reinforced concrete10.1016/S0008-8846(03)00246-1 ↗
7. Deterioration of concrete due to reinforcement steel corrosion10.1016/0958-9465(95)00043-7 ↗
8. Reinforcement corrosion and deflection of RC beams- an experimental critique of current test methods10.1016/S0958-9465(02)00076-8 ↗
9. Long-term performance of corrosion-damaged reinforced concrete beams
10. Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process10.1016/j.cemconres.2009.09.026 ↗
11. Analytical study on concrete cover due to reinforcement corrosion
12. Service life model for concrete structures in chloride laden environments
13. Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams10.1016/j.cemconres.2013.11.006 ↗
14. Structural assessment of corroded reinforced concrete beams: modeling guidelines10.1061/(ASCE)0733-9445(2004)130:8(1214) ↗
15. Effects of reinforcement configuration and sustained load on the behavior of reinforced concrete beams affected by reinforcing steel corrosion10.1016/j.cemconcomp.2012.07.010 ↗
16. Corrosion cracking in relation to bar diameter, cover and concrete quality10.1061/(ASCE)0899-1561(1992)4:4(327) ↗
17. 2012
18. Modeling the cracking of cover concrete due to non-uniform corrosion of reinforcement10.1016/j.corsci.2014.08.025 ↗
19. A model for prediction of time from corrosion initiation to corrosion cracking10.1016/j.cemconcomp.2006.11.004 ↗
20. Model for cover cracking of RC beams due to partial surface steel corrosion10.1016/j.conbuildmat.2010.06.081 ↗
21. Influence of corrosion crack patterns on the rate of crack widening of RC beams10.1016/j.conbuildmat.2010.11.097 ↗
22. Behavior of patch repaired concrete structural elements under increasing static loads to flexural failure10.1061/(ASCE)0899-1561(2005)17:2(168) ↗
23. Cover cracking as a function of bar corrosion: Part I-experimental test10.1007/BF02472805 ↗
24. Calculation of corrosion rate for reinforced concrete beams based on corrosive crack width
25. Prediction of corrosion-induced crack width of corroded reinforced concrete structures
26. Modeling the structural effects of rust in concrete cover10.1061/(ASCE)EM.1943-7889.0000215 ↗
27. Carbon-fiber-reinforced polymer repair to extend service life of corroded reinforced concrete beams10.1061/(ASCE)1090-0268(2005)9:2(187) ↗
28. Experimental study on flexural capacity of corrosion-damaged RC beams repaired with different layers of CFRP
29. Structural performance of corroded RC beams repaired with CFRP sheets10.1016/j.compstruct.2010.01.001 ↗
30. Control of corrosion-induced damage in reinforced concrete beams using carbon fiber-reinforced polymer laminates10.1061/(ASCE)1090-0268(2005)9:2(195) ↗
31. Corrosion protection of fiber-reinforced polymer-wrapped reinforced concrete
32. Evaluation of corrosion activity in FRP repaired RC beams10.1016/j.cemconcomp.2006.07.013 ↗
33. Behavior of CFRP strengthened reinforced concrete beams in corrosive environment10.1061/(ASCE)1090-0268(2007)11:3(291) ↗
34. Effect of damaged concrete cover on the behavior of corroded concrete beams repaired with CFRP sheets10.1016/j.compstruct.2011.01.011 ↗
35. Experimental study on rehabilitation of corrosion-damaged reinforced concrete beams with carbon fiber reinforced polymer10.1016/j.conbuildmat.2012.09.023 ↗
36. Effect of concrete substrate repair methods for beams aged by accelerated corrosion and strengthened with CFRP
37. Performance evaluation of carbon fiber-reinforced polymer-repaired beams under corrosive environmental conditions
38. Serviceability of corrosion-affected RC beams after patch repairs and FRPs under load10.1617/s11527-010-9630-8 ↗
39. Near-surface mounted FRP reinforcement: an emerging technique for strengthening structures10.1016/j.compositesb.2006.08.003 ↗
40. Repairing corroded RC beam with near-surface mounted CFRP rods10.1617/s11527-010-9693-6 ↗
41. Mechanical behavior of corroded RC beams strengthened by NSM CFRP rods10.1016/j.compositesb.2014.04.012 ↗
42. Experimental study on flexural performance of corroded RC beams strengthened with AFRP sheets10.4028/www.scientific.net/KEM.405-406.343 ↗
43. Flexural response of corroded reinforced concrete beams strengthened with powder-actuated fastened composites
44. Innovative repair of severely corroded t-beans using fabric-reinforced cementitious matrix
45. Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites10.1061/(ASCE)1090-0268(2003)7:3(219) ↗
46. Design-oriented strength model for FRP confined concrete members10.1061/(ASCE)CC.1943-5614.0000295 ↗
47. FRP-confined concrete in circular sections: review and assessment of stress-strain models10.1016/j.engstruct.2012.06.010 ↗
48. Peak strength and ultimate strain prediction for FRP confined square and circular concrete sections10.1016/j.compositesb.2014.07.026 ↗
49. Analysis of the fatigue behavior of reinforced concrete beams strengthened in flexure with fiber reinforced polymer laminates10.1016/j.compositesb.2016.04.014 ↗
50. 2008
51. Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete10.1061/(ASCE)0899-1561(2003)15:1(41) ↗
52. Effect of cracking, corrosion and repair on the frequency of RC beams10.1016/j.conbuildmat.2009.10.036 ↗
53. Structural performance of shear-critical RC deep beams with corroded longitudinal steel reinforcement10.1016/j.cemconcomp.2012.05.003 ↗