Methodology for characterization of internal structure parameters governing performance in NCF composites
Source abstract
Abstract
Abstract Mechanical performance of non-crimp fabric composites is very dependent on their internal meso- and micro-structure which is defined by the manufacturing process of the fabric and composite processing conditions. This paper identifies the most important parameters which control mechanical properties of these materials. The identification is based on experimental observations and available theoretical findings. Characteristics of the internal structure of non-crimp fabric composites are analyzed in context of their significance for in-plane elastic and failure properties. Methodology for determination of most typical geometrical parameters of composites using optical observations of cross-sections of manufactured laminates is described. The methodology is applied to characterize cross-ply and quasi-isotropic composite laminates. These results are analyzed and a comparison between the laminates is performed. Discussion concerning advantages and disadvantages of the proposed methodology in terms of accuracy and usefulness along with practical recommendations of its application are presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Improving the delamination resistance of CFRP by stitching-a review10.1016/0266-3538(94)90019-1 ↗
2. On the effects of stitching in CFRPs-I. Mode I delamination toughness10.1016/S0266-3538(97)00229-7 ↗
3. On the effects of stitching in CFRPs-II. Mode II delamination toughness10.1016/S0266-3538(97)00186-3 ↗
4. Finite element investigation of the compressive strength of non-crimp fabric based composites10.1016/S0266-3538(98)00165-1 ↗
5. A finite-element investigation of the interlaminar shear behaviour of non-crimp-fabric-based composites10.1016/S0266-3538(99)00091-3 ↗
6. Compressive failure analysis of non-crimp fabric composites with large out-of-plane misalignment of fiber bundles10.1016/j.compositesa.2004.10.028 ↗
7. Approximate analytical constitutive model for non-crimp fabric composites10.1016/j.compositesa.2004.06.007 ↗
8. Mattsson D, Varna J. Average strain in fiber bundles and its effects on composite stiffness. Eng Mater Technol, submitted for publication.
9. Modeling uniaxial tensile properties of multiaxial warp knitted fabrics10.1177/004051759806801107 ↗
10. Characterizing and modelling bending properties of multiaxial warp-knitted fabrics10.1177/004051759906900910 ↗
11. The permeability of non-crimp stitched fabrics10.1016/S1359-835X(00)00037-3 ↗
12. Carbon composites based on multi-axial multi-ply stitched preforms. Part 1. Geometry of the preform10.1016/S1359-835X(02)00090-8 ↗
13. Carbon composites based on multi-axial multi-ply stitched preforms. Part 4. Mechanical properties of composites and damage observation10.1016/j.compositesa.2005.02.004 ↗
14. The elastic moduli of fiber-reinforced materials10.1115/1.3629590 ↗
15. Analysis of composite materials – a survey10.1115/1.3167081 ↗
16. Miller AJ. The effect of microstructural parameters on the mechanical properties of non-crimp fabric composites, MPhil thesis, Cranfield University, School of Industrial and Manufacturing Science, August 1996.
17. Formation of damage and its effects on non-crimp fabric reinforced composites loaded in tension10.1016/S0266-3538(03)00292-6 ↗
18. Varna J, Lundmark P, Mattsson D, Megnis M. Constitutive models for composite laminates with matrix cracks and fiber breaks. In: International conference on fracture and damage mechanics IV. Mallorca, Spain, 2005.
19. Mattsson D, Joffe R, Varna J. Damage in NCF composites under tension. Eng Fract Mech, submitted for publication.
20. Fleck NA, Budiansky B. Compressive failure of fiber composites due to microbuckling. In: Inelastic deformation of composite materials/IUTAM symposium. Troy, New York, May 1990. p. 235–73.10.1007/978-1-4613-9109-8_12 ↗