journal article·2016-04

Fabrication and thermo-mechanical characterization of glass fiber/vinyl ester wind turbine rotor blade

Umair Javaid, Zaffar M. Khan, M.B. Khan, M. Bassyouni, S.M.-S. Abdel-Hamid, M.H. Abdel-Aziz, Syed W. ul Hasan

Publisher page

Abstract

Abstract In this study, the fabrication and thermo-mechanical characteristics of glass fiber/vinyl ester composite materials for 2.4 m wind turbine rotor blade with tower height of 6 m are investigated. Hand lay-up technique with matching molds was used to produce the wind rotor blades according to National Advisory Committee for Aeronautics (NACA) 4527 aerofoil profile. Bending stiffness was found to be 14.80 kN/m. Results demonstrate the manufactured composite rotors process to manufacture wind turbine blades with structural integrity. Dynamic testing was performed to verify the structural integrity of wind turbine at 400 r.p.m. In dynamic mechanical testing, the storage modulus decreases with increase in temperature. The glass transition temperature of glass fiber/vinyl ester composite was obtained at 73.4 °C based on loss modulus behavior. FT-IR analysis of cured vinyl ester (Hetron 922) showed presence of acrylol double bound confirming proper curing of vinyl ester. FT-IR analysis at temperature 25, 50 and 100 °C does not show significant change in resin chemical structure. Glass fiber/vinyl ester composites exhibit approximately 23 °C higher decomposition temperature than neat vinyl ester using thermogravimetric analyzer. Eco audit study showed that the energy and carbon emission are mainly due to use phase. It is found that materials phase has 6.1% CO 2 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Natural Fiber Reinforced Composites · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Shafiqur Rehman, Luai M. Al-Hadhrami, Md. Mahbub Alam, J.P. Meyer, Empirical correlation between hub height and local wind shear exponent for different sizes of wind turbines, Sustain Energy Technol Assess 2013;4:45–51.
2. Manufacture and characterization of stealth wind turbine blade with periodic pattern surface for reducing radar interference10.1016/j.compositesb.2013.08.043 ↗
3. Cost-competitive incentives for wind energy development in China: institutional dynamics and policy changes10.1016/S0301-4215(01)00136-7 ↗
4. Can flax replace E-glass in structural composites? A small wind turbine blade case study10.1016/j.compositesb.2013.04.027 ↗
5. Materials selection strategy and surface treatment of polymer composites for wind turbine blades fabrication
6. Synthesis, fabrication and mechanical characterization of reinforced epoxy and polypropylene composites for wind turbine blades10.1177/0731684414561538 ↗
7. Chapter 9-Wind energy
8. Investigation of fatigue life for a medium scale composite wind turbine blade10.1016/j.ijfatigue.2006.02.034 ↗
9. Characterisation of composites for wind turbine blades10.1016/S0034-3617(12)70111-X ↗
10. Materials challenges in present and future wind energy10.1557/mrs2008.70 ↗
11. Composite materials for wind power turbine blades10.1146/annurev.matsci.35.100303.110641 ↗
12. 13-The use of rice straw and husk fibers as reinforcements in composites
13. Elastic–plastic analysis and strength evaluation of adhesive joints in wind turbine blades10.1016/j.compositesb.2012.02.001 ↗
14. Post-buckling failure in multi-delaminated composite wind turbine blade materials10.1016/j.matdes.2011.06.012 ↗
15. Modeling the statistical lifetime of glass fiber/polymer matrix composites in tension10.1016/S0263-8223(99)00069-0 ↗
16. Damage and fatigue in composites – a personal account10.1016/j.compscitech.2008.04.042 ↗
17. Trends in the design, manufacture and evaluation of wind turbine blades10.1002/we.90 ↗
18. Alternative composite materials for megawatt-scale wind turbine blades: design considerations and recommended testing
19. Ablation and thermo-mechanical investigation of short carbon fiber impregnated elastomeric ablatives for ultrahigh temperature applications10.1016/j.polymdegradstab.2014.08.032 ↗
20. An overview of the technology of fibre-reinforced plastics for design purposes10.1016/S0261-3069(98)00007-7 ↗
21. Ong · 2000
22. Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates10.1016/S0266-3538(98)00078-5 ↗
23. Optimising the energy consumption on pultrusion process10.1016/j.compositesb.2013.09.035 ↗
24. Carbon fibre and glass fibre hybrid reinforced plastics10.1016/0010-4361(78)90341-5 ↗
25. Mechanical properties of carbon/glass fibre reinforced hybrids10.1016/0015-0568(82)90051-3 ↗
26. Tooling up for large wind turbine blades10.1016/S0034-3617(07)70281-3 ↗
27. Mishnaevsky · 2011
28. Thermal behavior of E-glass fiber-reinforced unsaturated polyester composites10.1016/j.compositesb.2013.08.085 ↗
29. Simulation of the fracture behavior of elastomeric composites: mechanical interactions at material interfaces10.1002/pc.750150112 ↗
30. Comparison of mechanical properties of glass fiber/vinyl ester and carbon fiber/vinyl ester10.1016/j.compositesb.2005.01.004 ↗
31. A seawater tank approach to evaluate the dynamic failure and durability of E-glass/vinyl ester marine composites10.1016/j.compositesb.2011.08.039 ↗
32. Synthesis and characterization of Polyurethane – treated waste milled light bulbs composites10.1016/j.compositesb.2011.08.014 ↗
33. Ashby · 2013