journal article·2018-07

Improving flexural strength and toughness of geopolymer mortars through additively manufactured metallic rebars

Ilenia Farina, Mariano Modano, Giulio Zuccaro, Russell Goodall, Francesco Colangelo

Publisher page

Abstract

Abstract This paper presents the results of an experimental study on the flexural reinforcement of a geopolymer mortar through additively manufactured metallic rebars. A mortar employing a geopolymer binder with low calcium content fly ash is reinforced with Ti6Al4V rebars additively manufactured though electron beam melting. The effectiveness of reinforcements realized with rebars featuring either smooth or rough surface profiles is studied through three-point bending tests and post-test microscopy analysis. The given experimental results highlight micro and macroscale pullout failure mechanisms in specimens reinforced with rebars showing cylindrical embossments on the lateral surface, which remarkably improve the flexural strength and the interfacial bond strength of the analyzed mortar. The role played by the surface roughness of the reinforced elements on the bond-slip response of the matrix-rebar interface is highlighted, while drawing comparisons with available literature results on cement mortars.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers10.1016/j.compositesb.2015.12.006 ↗
2. Surface roughness effects on the reinforcement of cement mortars through 3d printed metallic fibers10.1016/j.compositesb.2016.05.055 ↗
3. Optimal design and additive manufacturing of novel reinforcing elements for composite materials
4. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling10.1016/j.compositesb.2015.06.013 ↗
5. Highly oriented carbon fiber-polymer composites via additive manufacturing10.1016/j.compscitech.2014.10.009 ↗
6. Rapid prototyping of electrically conductive components using 3D printing technology10.1016/j.jmatprotec.2009.03.015 ↗
7. Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications10.1016/j.compositesb.2015.10.005 ↗
8. Shielding effectiveness tests of low-cost civil engineering materials in a reverberating chamber10.2528/PIERB13071703 ↗
9. NiTi-Al Interface strength in ultrasonic additive manufacturing composites10.1016/j.compositesb.2013.10.024 ↗
10. Interfacial shear strength estimates of NiTi-Al matrix composites fabricated via ultrasonic additive manufacturing10.1016/j.compositesb.2015.03.005 ↗
11. On the additive manufacturing and testing of tensegrity structures10.1016/j.compstruct.2015.04.038 ↗
12. On the mechanical modeling of the extreme softening/stiffening response of axially loaded tensegrity prisms10.1016/j.jmps.2014.10.010 ↗
13. Experimental response of additively manufactured metallic pentamode materials confined between stiffening plates10.1016/j.compstruct.2016.01.091 ↗
14. Novel “load adaptive algorithm based” procedure for 3D printing of cancellous bone-inspired structures10.1016/j.compositesb.2016.10.033 ↗
15. Investigations for dimensional accuracy of Al alloy/Al-MMC developed by combining stir casting and ABS replica based investment casting10.1016/j.compositesb.2016.10.008 ↗
16. Novel “load adaptive algorithm based” procedure for 3D printing of lattice-based components showing parametric curved micro-beams10.1016/j.compositesb.2016.10.037 ↗
17. Printing soft matter in three dimensions10.1038/nature21003 ↗
18. Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system10.1063/1.4769050 ↗
19. The effect of density and feature size on mechanical properties of isostructural metallic foams produced by additive manufacturing10.1016/j.actamat.2014.10.058 ↗
20. Dimensional accuracy of Electron Beam Melting (EBM) additive manufacture with regard to weight optimized truss structures10.1016/j.jmatprotec.2015.08.028 ↗
21. Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures10.1016/j.compositesb.2016.05.038 ↗
22. Waste management by recycling of polymers with reinforcement of metal powder10.1016/j.compositesb.2016.08.029 ↗
23. Effect of single particle size, double particle size and triple particle size Al2O3 in Nylon-6 matrix on mechanical properties of feed stock filament for FDM10.1016/j.compositesb.2016.08.039 ↗
24. Thermal characterization of recycled polymer for additive manufacturing applications10.1016/j.compositesb.2016.09.009 ↗
25. Recycling of plastic solid waste: a state of art review and future applications10.1016/j.compositesb.2016.09.013 ↗
26. Recycled polyolefins waste concrete10.1016/j.compositesb.2016.09.041 ↗
27. Low temperature alkaline activation of weathered fly ash: influence of mineral admixtures on early age performance10.1016/j.conbuildmat.2015.02.069 ↗
28. Recycling of non-metallic automotive shredder residues and coal fly-ash in cold-bonded aggregates for sustainable concrete10.1016/j.compositesb.2017.02.004 ↗
29. Recycling of MSWI fly ash by means of cementitious double step cold bonding pelletization: technological assessment for the production of lightweight artificial aggregates10.1016/j.jhazmat.2015.06.018 ↗
30. Epoxy/glass fibres composites for civil applications: comparison between thermal and microwave crosslinking routes10.1016/j.compositesb.2017.06.003 ↗
31. Mechanical properties and durability of mortar containing fine fraction of demolition wastes produced by selective demolition in South Italy10.1016/j.compositesb.2016.10.045 ↗
32. Experimental study of the thermo-mechanical properties of recycled PET fiber reinforced concrete10.1016/j.compstruct.2011.03.025 ↗
33. On the use of R-PET strips for the reinforcement of cement mortars10.1016/j.compositesb.2012.09.070 ↗
34. Effects of recycled PET fibers on the mechanical properties and seawater curing of Portland cement-based concretes10.1016/j.conbuildmat.2014.03.019 ↗
35. Geopolymer mortars as sustainable repair material: a comprehensive review10.1016/j.rser.2017.05.076 ↗
36. Mechanical and thermal properties of fly ash based geopolymers10.1016/j.conbuildmat.2017.11.023 ↗
37. Mechanical and thermal properties of lightweight geopolymer composites10.1016/j.cemconcomp.2017.11.016 ↗
38. Modano · 2015 · 209
39. Structural, seismic and geotechnical analysis of the Sant' Agostino church in L'Aquila (Italy)10.4067/S0718-50732013000100001 ↗
40. Multiscale carbon nanotube-woven glass fiber reinforced cyanate ester/epoxy composites for enhanced mechanical and thermal properties10.1016/j.compscitech.2014.09.007 ↗
41. Effect of carbon nanotubes electrophoretically-deposited on reinforcing carbon fibers on the strength and toughness of C/SiC composites10.1016/j.compscitech.2014.08.017 ↗
42. UNI EN 1015–11 · 2007
43. UNI EN 196–1 · 2016
44. ASTM 1018C, Standard test method for flexural toughness and first crack strength of fiber- reinforced concrete.
45. Enhancement of bond characteristics of ribbed-surface GFRP bars with concrete by using carbon fiber mat anchorage10.1016/j.conbuildmat.2016.12.083 ↗