journal article·2014-01

Three-dimensional non-linear elasticity-based 3D cubic B-spline finite element shear buckling analysis of rectangular orthotropic FGM plates surrounded by elastic foundations

M. Shariyat, K. Asemi

Publisher page

Abstract

In the present paper, shear buckling analysis of the orthotropic heterogeneous FGM plates is investigated for the first time. Moreover, influence of the Winkler-type elastic foundation is considered. The material properties are assumed to have in-plane orthotropy and transverse heterogeneity. The most accurate approach, i.e., the three-dimensional elasticity is employed instead of using the approximate plate theories. In contrast to all of the available displacement-based buckling analyses that have employed C0-continuous commercial finite element codes or semi-analytical methods, present formulations are C2-continuous due to using the proposed 3D cubic B-spline element. Results are derived based on principle of minimum potential energy and a non-linear finite element procedure utilizing a Galerkin-type 3D cubic B-spline solution algorithm. Buckling loads are detected based on a generalized geometric stiffness concept. In this regard, effects of both the prebuckling and buckling states are considered. To present a better imagination and more detailed discussions, details of the buckling mode shapes and the foundation interaction are discussed for plates with simply-supported edges. In addition, the more practical free and clamped edge conditions are also considered.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Composite Structure Analysis and Optimization · Structural Load-Bearing Analysis · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Generalized thermoelastic functionally graded orthotropic hollow sphere under thermal shock with three-phase-lag effect10.1016/j.euromechsol.2009.01.003 ↗
2. The vibration and buckling of laminated non-homogeneous orthotropic conical shells subjected to external pressure10.1016/j.euromechsol.2008.06.002 ↗
3. Buckling analysis of nonhomogeneous orthotropic thin-walled truncated conical shells in large deformation10.1016/j.tws.2012.08.002 ↗
4. Tensile behavior of functionally graded steels produced by electroslag remelting10.1007/BF02586133 ↗
5. Three-dimensional solution for transient thermal stresses of an orthotropic functionally graded rectangular plate10.1016/j.compstruct.2006.02.028 ↗
6. Elastic analysis of rotating functionally graded polar orthotropic disks10.1016/j.ijmecsci.2012.04.014 ↗
7. Three-dimensional analysis of multi-layered functionally graded anisotropic cylindrical panel under thermomechanical loading10.1016/j.mechmat.2007.06.008 ↗
8. An exact solution for the steady-state thermoelastic response of functionally graded orthotropic cylindrical shells10.1016/j.ijsolstr.2005.03.079 ↗
9. Exact solution for functionally graded anisotropic elastic composite laminates10.1177/002199803035565 ↗
10. Three-dimensional analysis of functionally graded plates10.1002/nme.3139 ↗
11. A critical review of recent research on functionally graded plates10.1016/j.compstruct.2012.09.001 ↗
12. Mechanical and thermal postbuckling of higher order shear deformable functionally graded plates on elastic foundations10.1016/j.compstruct.2011.05.017 ↗
13. Free vibration, buckling and static deflections of functionally graded plates10.1016/j.compscitech.2006.02.032 ↗
14. Mechanical and thermal buckling analysis of functionally graded plates10.1016/j.compstruct.2009.03.005 ↗
15. Buckling and vibration analysis of functionally graded composite structures using the finite element method10.1016/j.compstruct.2008.07.022 ↗
16. Postbuckling analysis of functionally graded plates subject to compressive and thermal loads10.1016/j.cma.2010.01.008 ↗
17. An efficient and simple refined theory for buckling analysis of functionally graded plates10.1016/j.apm.2011.07.062 ↗
18. Dynamic buckling of imperfect laminated plates with piezoelectric sensors and actuators subjected to thermo-electro-mechanical loadings, considering the temperature-dependency of the material properties10.1016/j.compstruct.2008.03.044 ↗
19. A double-superposition global–local theory for vibration and dynamic buckling analyses of viscoelastic composite/sandwich plates: a complex modulus approach10.1007/s00419-010-0483-y ↗
20. A nonlinear double-superposition global–local theory for dynamic buckling of imperfect viscoelastic composite/sandwich plates: A hierarchical constitutive model10.1016/j.compstruct.2011.02.005 ↗
21. Vibration and dynamic buckling control of imperfect hybrid FGM plates with temperature-dependent material properties subjected to thermo-electro-mechanical loading conditions10.1016/j.compstruct.2008.04.003 ↗
22. Semi-analytical buckling analysis of heterogeneous variable thickness viscoelastic circular plates on elastic foundations10.1016/j.mechrescom.2011.09.001 ↗
23. Semianalytical solution for buckling analysis of variable thickness two-directional functionally graded circular plates with nonuniform elastic foundations10.1061/(ASCE)EM.1943-7889.0000522 ↗
24. Budiansky B, Connor RW. Buckling stresses of clamped rectangular flat plates in shear. NACA Tech. Note No. 1559; 1948.
25. Elastic buckling of unilaterally constrained rectangular plates in pure shear10.1016/S0141-0296(97)00218-6 ↗
26. Buckling of composite plates under compression and shear
27. The shear buckling behaviour of thin composite plates with particular reference to the effects of bend-twist coupling10.1016/S0020-7403(00)00030-8 ↗
28. A co-rotational 8-node assumed strain shell element for postbuckling analysis of laminated composite plates and shells10.1007/s00466-003-0415-6 ↗
29. Postbuckling analysis of laminated composite plates subjected to the combination of in-plane shear, compression and lateral loading10.1016/j.ijsolstr.2005.08.004 ↗
30. Buckling of clamped orthotropic plate in shear10.1016/j.compstruct.2006.06.014 ↗
31. Shear buckling of rectangular composite plates composed of concentric layups10.1016/j.compositesa.2006.05.008 ↗
32. Shear buckling of thin plates with constant in-plane stresses10.1142/S021945540700223X ↗
33. Buckling of laminated plates with general boundary conditions under combined compression, tension, and shear—A semi-analytical solution10.1016/j.tws.2008.01.040 ↗
34. Shear buckling of thin plates using the spline collocation method10.1142/S0219455408002818 ↗
35. Stability analysis of long composite plates with restrained edges subjected to shear and linearly varying loads10.1177/0731684409105078 ↗
36. Elastic buckling of steel-concrete composite slabs subjected to pure shear load
37. Buckling and fracture behaviour of cracked thin plates under shear loading10.1016/j.matdes.2010.09.018 ↗
38. Buckling behavior of the multiple delaminated composite plates under shear and axial compression10.1016/j.commatsci.2012.03.032 ↗
39. Shear buckling analysis of anisotropic rectangular plates
40. Dynamic buckling and postbuckling of imperfect orthotropic cylindrical shells under mechanical and thermal loads, based on the three dimensional theory of elasticity10.1115/1.2791072 ↗
41. Three-dimensional elasticity solution for buckling of composite laminates10.1016/S0263-8223(00)00066-0 ↗
42. Three dimensional shear buckling of FG plates with various boundary conditions10.1016/j.compstruct.2012.08.031 ↗
43. A full compatible three-dimensional elasticity element for buckling analysis of FGM rectangular plates subjected to various combinations of biaxial normal and shear loads10.1016/j.finel.2013.05.011 ↗
44. Static analysis of functionally graded elastic anisotropic plates using a discrete layer approach10.1016/j.compositesb.2005.05.009 ↗
45. Isoparametric finite-element thermoelastoplastic creep analysis of shells of revolution10.1016/0308-0161(95)00061-5 ↗
46. A nonlinear Hermitian transfinite element method for transient behavior analysis of hollow functionally graded cylinders with temperature-dependent materials under thermo-mechanical loads10.1016/j.ijpvp.2008.09.004 ↗
47. Zienkiewicz · 2005
48. Hollig K. Finite element methods with B-splines. Society for industrial applied mathematics Philadelphia; 2003.10.1137/1.9780898717532 ↗
49. Shear flexible curved spline beam element for static analysis10.1016/S0168-874X(99)00013-X ↗
50. Transient analysis of thin-walled structures using macro spline finite elements10.1016/S0141-0296(97)00177-6 ↗
51. Semi-analytical consistent zigzag-elasticity formulations with implicit layerwise shear correction factors for dynamic stress analysis of sandwich circular plates with FGM layers10.1016/j.compositesb.2013.01.001 ↗
52. An exact solution for thermal buckling of annular FGM plates on an elastic medium10.1016/j.compositesb.2012.09.034 ↗
53. Static, free vibration and buckling analysis of isotropic and sandwich functionally graded plates using a quasi-3D higher-order shear deformation theory and a meshless technique10.1016/j.compositesb.2012.01.089 ↗
54. Reddy · 2004