Low velocity impact damage evaluation in fiber glass composite plates using PZT sensors
Source abstract
Abstract
Abstract In this work PZT sensors are proposed to characterize the impact effects in fiber glass composite plates. To provide effective and reliable results the analysis was accomplished on samples submitted to multiple impacts, then guaranteeing the same testing conditions for different impact levels. The analysis of the impact effect has been made by two parameters; amplitude response and time shift. PZT sensors have been bonded to the samples in a pitch-and-catch configuration and the Lamb wave symmetrical mode (S0) signal was used. The results demonstrate that the two evaluated parameters are able to characterise the different damage types occurring in these composites, as well as to evaluate their severity. It was also observed that amplitude predict well the defect size, whenever fiber-breakage occurs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Distributions of fatigue life and fatigue strength in notched specimens of a carbon eight-harness-satin laminate10.1177/002199838301700106 ↗
2. Damage detection on laminated composite materials using several NDT techniques10.1784/insi.2012.54.1.14 ↗
3. Impact on laminated composite materials10.1115/1.3119500 ↗
4. Comparison of the low and high velocity impact response of CFRP10.1016/0010-4361(89)90913-0 ↗
5. Prediction of low velocity impact damage in carbon–epoxy laminates10.1016/S1359-835X(01)00119-1 ↗
6. Residual strength after low velocity impact in carbon-epoxy laminates
7. Modelling the interaction between matrix cracking and delamination in carbon-epoxy laminates under low velocity impact10.1016/j.compscitech.2003.08.008 ↗
8. Effect of interlayer dalamination on mechanical behavior of carbon/epoxy laminates10.1177/0021998309344649 ↗
9. Tensile properties of real unidirectional kevlar/epoxy composites10.1016/0010-4361(90)90099-I ↗
10. Ryder JT, Crossman FM. A study of stiffness, residual strength and fatigue life relationships for composite laminates. NASA CR-172211, 1983.
11. Tension fatigue analysis and life prediction for composite laminates10.1016/0142-1123(89)90177-1 ↗
12. A three-dimensional modelling of low velocity impact damage in composite laminates10.1002/(SICI)1097-0207(19960515)39:9<1491::AID-NME914>3.0.CO;2-2 ↗
13. A numerical study on compressive behavior of composite plates with multiple circular delaminations considering delamination propagation10.1016/j.compscitech.2008.05.014 ↗
14. Repeated impact behavior of glass/epoxy laminates10.1002/pc.20728 ↗
15. Effect of repeated impacts on the response of plain-woven hybrid composites10.1016/j.compositesb.2010.01.001 ↗
16. Valdes SH, Soutis C. A structural health monitoring system for laminated composites. In: Proceedings of DETC. Pittsburgh, PA, USA; 2001. p. 2013–21.10.1115/DETC2001/VIB-21539 ↗
17. Structural damage detection using independent component analysis10.1177/1475921704041876 ↗
18. Effectiveness of the continuous wavelet transform in the analysis of some dispersive elastic waves10.1121/1.1378348 ↗
19. Structural health monitoring system based on diffracted Lamb wave analysis by multiresolution processing10.1088/0964-1726/10/3/312 ↗
20. A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers10.1016/S0263-8223(02)00115-0 ↗
21. Damage assessment in composites by Lamb waves and wavelet coefficients10.1088/0964-1726/12/3/310 ↗
22. Giurgiutiu · 2008
23. Banks · 1996
24. Damage detection in composite materials using Lamb wave methods10.1088/0964-1726/11/2/310 ↗
25. Detection of low-velocity impact damage in composite plates using Lamb waves10.1177/1475921704041869 ↗
26. A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers10.1016/S0263-8223(02)00115-0 ↗
27. Damage assessment in layered composites using spectral analysis and Lamb wave
28. Delamination detection in composite laminates from variations of their modal characteristics10.1006/jsvi.1999.2403 ↗
29. Quantitative damage detection in cross-ply laminates using Lamb wave method10.1016/S0266-3538(03)00163-5 ↗
30. Guided wave based detection of damage in honeycomb core sandwich structures10.1016/j.ndteint.2012.03.008 ↗
31. Instantaneous delamination detection in a composite plate using a dual piezoelectric transducer network10.1016/j.compstruct.2012.06.003 ↗
32. A modified time reversal method for Lamb wave based diagnostics of composite structures10.1016/j.ymssp.2012.03.007 ↗
33. Rose JL. A vision of ultrasonic guided wave inspection potential. In: Proceedings of the Seventh ASME NDE Topical Conference NDE-Vol. 20; 2001. p. 1–5.
34. Guided Lamb waves for identification of damage in composite structures: a review10.1016/j.jsv.2006.01.020 ↗
35. On determination of phase and group velocity of dispersive waves in solids
36. Practical considerations on ultrasonic guided wave propagation: immersion and contact methods
37. Damage in CFRPs due to low velocity impact at low temperature10.1016/j.compositesb.2004.04.003 ↗
38. Flow velocity profile via time-domain correlation: error analysis and computer simulation10.1109/58.55306 ↗
39. A real-time ultrasound time-domain correlation blood flowmeter: Part II10.1109/58.248223 ↗