journal article·2013-01

Localized indentation of sandwich panels with metallic foam core: Analytical models for two types of indenters

Zhongyou Xie, Zhijun Zheng, Jilin Yu

Composites Part B: Engineering· Volume 44· Issue 1
Publisher page

Abstract

Sandwich structures with metallic foam core are sensitive to local indentation because of the low strength of the core and low bending stiffness of the thin face sheets. In this paper, local indentation response of sandwich panels with metallic foam core under a flat/spherical indenter was analyzed. The composite sandwich is modeled as an infinite, isotropic, plastic membrane on a rigid-plastic foundation. For simplicity, a quadratic polynomial displacement field was employed to describe the deformation of the upper face sheet. By using the principle of minimum work, explicit solutions for the indentation force and the sizes of the deformation regions were derived. The analytical results were verified by those from simulation by using the ABAQUS code, and they are in close agreement. Distribution of radial tensile strain of the upper face sheet and the ratio of energy dissipation of foam core to that of the upper face sheet were analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Mechanical Behavior of Composites · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Indentation study of foam core sandwich composite panels10.1016/j.compstruct.2004.05.013 ↗
2. Influence of the foam core material on the indentation behavior of sandwich composite panels10.1177/026248930702600203 ↗
3. Indentation of foam-based polymer composite sandwich beams and panels under static loading10.1007/s11665-008-9313-6 ↗
4. Effect of face sheet material on the indentation response of metallic foams
5. Graphite/epoxy foam sandwich panels under quasi-static indentation10.1016/S0013-7944(00)00066-7 ↗
6. A 3-D elasticity solution for a sandwich composite with functionally graded core subjected to transverse loading by a rigid sphere10.1016/S0263-8223(03)00013-8 ↗
7. The elastic response of sandwich structures to local loading10.1016/S0263-8223(03)00186-7 ↗
8. Indentation study of Z-pin reinforced polymer foam core sandwich structures10.1016/j.compositesa.2009.04.004 ↗
9. Localized damage response of composite sandwich plates10.1016/S1359-8368(98)00051-1 ↗
10. The inelastic quasi-static response of sandwich structures to local loading10.1016/S0263-8223(03)00221-6 ↗
11. Griffith J, Vanzant H. Large deformation of circular membranes under static and dynamic loads. In: Proceedings of the first international congress on experimental mechanics. New York; November, 1961. p. 99–109.10.1016/B978-0-08-013346-1.50010-0 ↗
12. Jones · 1989
13. Analytical modelling of metallic circular plates subjected to impulsive loads10.1016/S0020-7683(01)00101-9 ↗
14. Localized indentation of sandwich beam with metallic foam core10.1177/1099636211421993 ↗
15. Indentation of composite sandwich beams10.1243/03093247V315353 ↗
16. Ferri R, Sankar BV. Static indentation and low velocity impact tests on sandwich plates. In: Proceeding of the 1997 ASME international mechanical engineering congress and exposition, Dallas, TX, USA; 1997. p. 485–90.10.1115/IMECE1997-0749 ↗
17. Impact and indentation behavior of sandwich panels – modeling and experimental testing10.1007/1-4020-3848-8_64 ↗
18. Experimental and numerical analyses of bending of foam-filled sections10.1007/BF01183678 ↗
19. Gibson · 1997
20. On the modeling of crush behavior of a closed-cell aluminum foam structure10.1016/S0022-5096(97)00082-3 ↗
21. Response mechanisms in the impact of graphite/epoxy honeycomb sandwich panels