journal article·2018-05Open access

Microwave absorption and mechanical performance of α-MnO2 nanostructures grown on woven Kevlar fiber/reduced graphene oxide-polyaniline nanofiber array-reinforced polyester resin composites

Ankita Hazarika, Biplab K. Deka, Kyungil Kong, DoYoung Kim, Young-Woo Nam, Jae-Hun Choi, Chun-Gon Kim, Young-Bin Park, Hyung Wook Park

Abstract

Abstract Various morphologies of α-MnO2 nanostructures were synthesized on the surface of woven Kevlar fiber (WKF) by hydrothermal method under different reaction conditions. Reduced graphene oxide-polyaniline nanofiber (RGO-PANI) arrays were synthesized by an in situ dilute polymerization technique and then dispersed within polyester (PES) resin. High-performance composites based on α-MnO2-grown WKF and RGO-PANI array-dispersed PES were fabricated with effective microwave-absorbing and mechanical properties by vacuum-assisted resin transfer molding (VARTM). WKF/MnO2 nanofibers/PES/PANI-RGO (2%) composites showed superior electromagnetic parameters in the frequency range of 1–18 GHz. The reflection loss (RL) of WKF/MnO2 nanofibers/PES/PANI-RGO (2.0%) was −36.5 dB at an absorbing frequency of 11.8 GHz, which has not been reported before. A higher tensile strength (160.12%), modulus (104.43%), and absorbed impact energy (207%) were observed for α-MnO2 nanofibers, compared with other morphologies of α-MnO2-incorporated WKF composites and the properties were enhanced with an increased percentage of PANI-RGO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Flame retardant materials and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. A three-dimensional absorber hybrid with polar oxygen functional groups of MWNTs/graphene with enhanced microwave absorbing properties10.1016/j.compositesb.2016.10.014 ↗
2. Tough graphene−polymer microcellular foams for electromagnetic interference shielding10.1021/am200021v ↗
3. Lightweight and anisotropic porous MWCNT/WPU composites for ultrahigh performance electromagnetic interference shielding10.1002/adfm.201503579 ↗
4. PET fabric/polypyrrole composite with high electrical conductivity for EMI shielding10.1016/S0379-6779(01)00562-8 ↗
5. Absorption properties of carbon black/silicon carbide microwave absorbers10.1016/j.compositesb.2010.11.009 ↗
6. Single layer microwave absorber based on expanded graphite–novolac phenolic resin composite for X-band applications10.1016/j.compositesb.2013.10.078 ↗
7. Directed growth and microwave absorption property of crossed ZnO netlike micro-/nanostructures10.1021/jp100341h ↗
8. Salt leached viable porous Fe3O4 decorated polyaniline- SWCNH/PVDF composite spectacles as an admirable electromagnetic shielding efficiency in extended Ku-band region10.1016/j.compositesb.2017.07.073 ↗
9. Tunable microwave absorption frequency by aspect ratio of hollow polydopamine@α-MnO2 microspindles studied by electron holography10.1021/acsami.6b00978 ↗
10. Morphology controllable microwave absorption property of polyvinylbutyral (PVB)-MnO2 nanocomposites10.1016/j.compositesb.2017.09.014 ↗
11. Microwave absorption characteristics of manganese dioxide with different crystalline phase and nanostructures10.1016/j.matchemphys.2010.07.027 ↗
12. Morphology-controlled synthesis and novel microwave absorption properties of hollow urchinlike α-MnO2 nanostructures10.1021/jp106652x ↗
13. Microwave-synthesized freestanding/iron-carbon nanotubes on polyester composites of woven Kevlar fibre and silver nanoparticle-decorated graphene10.1038/srep40386 ↗
14. Polyaniline–MWCNT nanocomposites for microwave absorption and EMI shielding10.1016/j.matchemphys.2008.08.065 ↗
15. Graphite reinforced polyvinylidene fluoride composites an efficient and sustainable solution for electromagnetic pollution10.1016/j.compositesb.2017.05.030 ↗
16. Remarkable microwave absorption performance of graphene at a very low loading ratio10.1016/j.compositesb.2017.02.016 ↗
17. Graphene/polyaniline nanorod arrays:synthesis and excellent electromagnetic absorption properties10.1039/c2jm34273a ↗
18. Microwave absorbing properties of a thermally reduced graphene oxide/nitrile butadiene rubber composite10.1016/j.carbon.2012.01.033 ↗
19. Hybrid of MoS2 and reduced graphene oxide: a lightweight and broadband electromagnetic wave absorber10.1021/acsami.5b08410 ↗
20. The electromagnetic property of chemically reduced graphene oxide and its application as microwave absorbing material
21. Poly(vinyl butyral) -polyaniline-magnetically functionalized fly ash cenosphere composite film for electromagnetic interference shielding10.1016/j.compositesb.2016.09.035 ↗
22. Microwave absorption studies of polyaniline nanocomposites encapsulating gold nanoparticles on the surface of reduced graphene oxide in the presence of 2-naphthalene sulfonic acid10.1007/s00396-012-2596-z ↗
23. Fabrication and synthesis of highly ordered nickel cobalt sulfide nanowire-grown woven kevlar fiber/reduced graphene oxide/polyester composites10.1021/acsami.7b11712 ↗
24. Growth of aligned ZnO nanorods on woven kevlar@fiber and its performance in woven kevlar@fiber/polyester composites10.1016/j.compositesa.2015.08.022 ↗
25. Microwave-induced hierarchical iron-carbon nanotubes nanostructures anchored on polypyrrole/graphene oxide-grafted woven kevlar® fiber10.1016/j.compscitech.2016.04.022 ↗
26. Morphology and chemical composition dependent synthesis and electrochemical properties of MnO2-based nanostructures for efficient hydrazine detection10.1016/j.snb.2015.09.016 ↗
27. Single-crystal α-MnO2 nanorods: synthesis and electrochemical properties
28. Simultaneously improving the tensile strength and modulus of aramid fiber by enhancing amorphous phase in supercritical carbon dioxide10.1039/C4RA00801D ↗
29. Kinetically controlled synthesis of hexagonally close-packed cobalt nanorods with high magnetic coercivity10.1002/adfm.200800822 ↗
30. Microwave absorption behavior of core−shell structured poly (3,4-ethylenedioxy thiophene)−barium ferrite nanocomposites10.1021/am900893d ↗
31. Interfacially engineered sandwich-Like rGO/carbon microspheres/rGO composite as an efficient and durable microwave absorber
32. Scattering and absorption cross sections of ultrafine particles
33. High permittivity and microwave absorption of porous graphitic carbons encapsulating Fe nanoparticles10.1016/j.compscitech.2012.06.022 ↗
34. Preparation of honeycomb SnO2 foams and configuration-dependent microwave absorption features10.1021/acsami.5b08383 ↗
35. Excellent microwave absorption properties by tuned electromagnetic parameters in polyaniline coated Ba0.9La0.1Fe11.9Ni0.1O19/reduced graphene oxide nanocomposites10.1039/C7RA06800J ↗
36. A permittivity regulating strategy to achieve high-performance electromagnetic wave absorbers with compatibility of impedance matching and energy conservation10.1039/C6NJ03052A ↗
37. Thermal frequency shift and tunable microwave absorption in BiFeO3 family
38. Morphology-control synthesis of a core-shell structured NiCu alloy with tunable electromagnetic-wave absorption capabilities10.1021/acsami.5b02716 ↗
39. Facile strategy to prepare light-weight PVA membrane based on schiff base derivatives and MWCNTs for electromagnetic wave absorption10.1021/acs.jpcc.6b07383 ↗
40. Impact and delamination failure of multiscale carbon nanotube-fiber reinforced polymer composites: a review10.5139/IJASS.2011.12.2.115 ↗
41. Synthesis and properties of ZnO nanofibers prepared by electrospinning10.1007/s10971-009-2030-2 ↗
42. Short-aramid-fiber toughening of epoxy adhesive joint between carbon fiber composites and metal10.1016/j.compositesb.2015.03.010 ↗
43. Adhesive joints between carbon fiber and aluminum foam reinforced by sur-treated aramid fibers10.1002/pc.22929 ↗
44. Multifunctional enhancement of woven carbon fiber/ZnO nanotube-based structural supercapacitor and polyester resin-domain solid-polymer electrolytes10.1016/j.cej.2017.05.093 ↗
45. A facile approach towards large-scale synthesis of hierarchically nanoporous SnO2@Fe2O3 0D/1D hybrid and its effect on flammability, thermal stability and mechanical property of flexible poly(vinyl chloride)10.1016/j.compositesb.2016.11.009 ↗
46. Multifunctional CuO nanowire embodied structural supercapacitor based on woven carbon fiber/ionic liquid–polyester resin10.1016/j.compositesa.2016.05.007 ↗
47. Processing and mechanical characterization of ZnO/polyester woven carbon–fiber composites with different ZnO concentrations10.1016/j.compositesa.2013.08.013 ↗
48. Covalent surface modification of α-MnO2 nanorods with L-valine amino acid by solvothermal strategy, preparation of PVA/α-MnO2-L-valine nanocomposite films and study of their morphology, thermal, mechanical, Pb(II) and Cd(II) adsorption properties10.1039/C6RA11123H ↗
49. Production of PVC/α-MnO2-KH550 nanocomposite films: morphology, thermal, mechanical and Pb (II) adsorption properties10.1016/j.eurpolymj.2016.03.022 ↗
50. Polyaniline nanofiber-reinforced conducting hydrogel with unique pH-sensitivity10.1039/c1sm05890h ↗