journal article·2024-02-01Open access

Multiscale Porous Poly (Ether-Ether-Ketone) Structures Manufactured by Powder Bed Fusion Process

Yaan Liu, Richard Davies, Nan Yi, Paul McCutchion, Binling Chen, Oana Ghita

Abstract

The aim of the study is to create a multiscale highly porous poly (ether-ether-ketone) (PEEK) structure while maintaining mechanical performance; the distribution of pores being generated by the manufacturing process combined with a porogen leaching operation. Salt at 70 wt% concentration was used as a porogen in a dry blend with PEEK powder sintered in the powder bed fusion process. The printed porous PEEK structures were examined and evaluated by scanning electron microscopy, microcomputed tomography, and mechanical testing. The PEEK structures incorporating 70 wt% salt achieved 79–86% porosity, a compressive yield strength of 4.1 MPa, and a yield strain of ∼60%. Due to the salt leaching process, the PEEK porous frameworks were fabricated without the need to drastically reduce the process parameters (defined by the energy density [ED]), hence maintaining the structural integrity and good mechanical performance. The compression results highlighted that the performance is influenced by the printing orientation, level of the PEEK particle coalescence (controlled here by the ED), pore/cell wall thickness, and subsequently, the overall porosity framework. The porous printed PEEK structures could find potential uses in a wide range of applications from tissue engineering, filtration and separation to catalysts, drug release, and gas storage.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Foaming and Composites · biodegradable polymer synthesis and properties · Carbon dioxide utilization in catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Engineering, College of Engineering, Mathematics and Physical Sciences, University of Exeter, Exeter, United Kingdom.

References (36)

Show source-provided references
1. 10.1039/C7MH00084G10.1039/C7MH00084G ↗
2. 10.1038/nature0078510.1038/nature00785 ↗
3. 10.1002/chem.20090304310.1002/chem.200903043 ↗
4. 10.1016/j.polymer.2009.06.02710.1016/j.polymer.2009.06.027 ↗
5. 10.1177/088532821663863610.1177/0885328216638636 ↗
6. 10.1002/adma.20090365510.1002/adma.200903655 ↗
7. 10.1016/j.biomaterials.2007.07.01310.1016/j.biomaterials.2007.07.013 ↗
8. 10.1016/j.colsurfb.2018.05.02710.1016/j.colsurfb.2018.05.027 ↗
9. 10.1016/S0142-9612(03)00028-010.1016/S0142-9612(03)00028-0 ↗
10. 10.1007/s10856-016-5731-410.1007/s10856-016-5731-4 ↗
11. Green S, , Schlegel J. A polyaryletherketone biomaterial for use in medical implant applications. Polym Med Ind Proc Brussels, Belgium, 14–15 May 2001.
12. 10.1016/j.actbio.2009.08.00410.1016/j.actbio.2009.08.004 ↗
13. 10.1016/j.jmbbm.2009.07.00210.1016/j.jmbbm.2009.07.002 ↗
14. 10.5301/JABFM.2012.977110.5301/JABFM.2012.9771 ↗
15. 10.1016/j.msec.2014.11.04410.1016/j.msec.2014.11.044 ↗
16. 10.1016/j.matdes.2016.12.01210.1016/j.matdes.2016.12.012 ↗
17. 10.1016/j.memsci.2017.02.02710.1016/j.memsci.2017.02.027 ↗
18. 10.1002/app.2539010.1002/app.25390 ↗
19. 10.1016/j.biomaterials.2013.08.07110.1016/j.biomaterials.2013.08.071 ↗
20. 10.1002/jbm.a.3428610.1002/jbm.a.34286 ↗
21. 10.1016/j.polymertesting.2017.08.02410.1016/j.polymertesting.2017.08.024 ↗
22. Komarnicki P. Proceedings of the 13th International Scientific Conference. In: Eugeniusz R Damian P eds. A Review of Fused Deposition Modeling Process Models. Cham: Springer International Publishing 2017; pp. 241–247.10.1007/978-3-319-50938-9_25 ↗
23. 10.1016/j.polymer.2021.12386510.1016/j.polymer.2021.123865 ↗
24. 10.1016/j.matchemphys.2021.12448510.1016/j.matchemphys.2021.124485 ↗
25. 10.1016/j.msec.2021.11233310.1016/j.msec.2021.112333 ↗
26. 10.1080/17452759.2015.109705310.1080/17452759.2015.1097053 ↗
27. 10.1016/j.matlet.2019.12722710.1016/j.matlet.2019.127227 ↗
28. 10.1016/j.matdes.2017.10.07810.1016/j.matdes.2017.10.078 ↗
29. 10.1016/j.matdes.2016.04.09710.1016/j.matdes.2016.04.097 ↗
30. 10.1016/j.eurpolymj.2015.04.00310.1016/j.eurpolymj.2015.04.003 ↗
31. 10.1243/095441105X934510.1243/095441105X9345 ↗
32. 10.1016/S0142-9612(03)00131-510.1016/S0142-9612(03)00131-5 ↗
33. 10.1016/j.jmbbm.2016.09.00610.1016/j.jmbbm.2016.09.006 ↗
34. 10.1002/pen.1037510.1002/pen.10375 ↗
35. 10.1097/BTO.000000000000024210.1097/BTO.0000000000000242 ↗
36. 10.1016/S0021-9290(01)00011-210.1016/S0021-9290(01)00011-2 ↗