journal article·2024-10-01Open access

Directed Energy Deposition of Parts with Internal Channels Using Removable Graphite Supports

Dilara Celik, Ali Karaca, Bahattin Koc

Abstract

Additive manufacturing (AM) techniques have the potential to produce complex parts, and many of these techniques require the use of support structures to prevent deformations and to minimize thermal effects during the printing process, particularly when building overhangs and internal cavities. However, removing the support structures through postprocessing incurs additional costs and time penalties. Unlike other AM techniques, support structures are not used in directed energy deposition (DED) technique due to its working principle. Therefore, special multiaxis complex path-planning strategies for DED are adopted to print relatively simple overhang geometries. Nevertheless, printing internal channels using this technique can still be challenging or nearly impossible. In this work, a novel DED process using graphite as a support material is proposed for additively manufacturing simple and complex internal channels. The support material is easily removed without requiring extensive machining processes. The results demonstrated that the support material did not negatively impact part quality, and in fact, the presence of different carbides at the interaction zone increased hardness and Young's modulus. Moreover, there were no cracks and or porosity at the support material-part interface. This study is the first of its kind to demonstrate the potential for using graphite as a support material for DED processes in additively manufacturing parts with complex internal channels and overhangs and highlights the need for further research in this area.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Engineering and Natural Sciences, Material Science and Nano Engineering, Sabanci University, Istanbul, Turkey.

Integrated Manufacturing Technologies Research and Application Center, Material Science and Nano Engineering, Sabanci University, Istanbul, Turkey.

Faculty of Engineering and Natural Sciences, Manufacturing Engineering, Sabanci University, Istanbul, Turkey.

References (41)

Show source-provided references
1. Jiang J, , Xu X, , Stringer J. Support structures for additive manufacturing: A review. J Manuf Mater Process, 2018; 2(4):1–23; doi: 10.3390/jmmp2040064
2. 10.1016/j.mfglet.2019.04.00210.1016/j.mfglet.2019.04.002 ↗
3. Hildreth OJ, , Nassar AR, , Chasse KR, et al. Dissolvable metal supports for 3D direct metal printing. 3D Print Addit Manuf, 2016; 3(2):91–97; doi: 10.1089/3dp.2016.0013
4. Handa SS. Precipitation of Carbides in a Ni-Based Superalloy. Masters Degree Proj; University West: Trollhättan, Sweden; 2014; pp. 1–33.
5. 10.1007/BF0264293810.1007/BF02642938 ↗
6. 10.3390/met1001009610.3390/met10010096 ↗
7. 10.1007/BF0264925910.1007/BF02649259 ↗
8. 10.1016/S1006-706X(14)60058-310.1016/S1006-706X(14)60058-3 ↗
9. 10.1016/j.matpr.2016.03.02410.1016/j.matpr.2016.03.024 ↗
10. Andersson J. Weldability of Precipitation Hardening Superalloys—Influence of Microstructure. Doctor Thesis. Chalmers University of Technology: Gothenburg, 2011; pp. 1–57.
11. 10.1007/BF0265030010.1007/BF02650300 ↗
12. 10.2351/7.000025910.2351/7.0000259 ↗
13. 10.1108/RPJ-05-2016-007110.1108/RPJ-05-2016-0071 ↗
14. 10.1089/3dp.2017.012410.1089/3dp.2017.0124 ↗
15. 10.1177/095440541243712610.1177/0954405412437126 ↗
16. 10.1016/j.cirp.2014.05.00410.1016/j.cirp.2014.05.004 ↗
17. 10.1115/1.186056210.1115/1.1860562 ↗
18. 10.1016/S0257-8972(03)00748-510.1016/S0257-8972(03)00748-5 ↗
19. 10.1016/j.apsusc.2007.05.07810.1016/j.apsusc.2007.05.078 ↗
20. 10.1016/j.jmatprotec.2008.10.01210.1016/j.jmatprotec.2008.10.012 ↗
21. 10.1016/j.ijmachtools.2015.02.01110.1016/j.ijmachtools.2015.02.011 ↗
22. 10.1016/j.jmatprotec.2009.09.00610.1016/j.jmatprotec.2009.09.006 ↗
23. 10.1007/s00170-019-04541-010.1007/s00170-019-04541-0 ↗
24. Azizi A Schiffres SN. Laser Metal Additive Manufacturing on Graphite. In: Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference SFF 2018 The University of Texas: Austin; 2020; pp. 2315–2324.
25. 10.1016/j.jmapro.2023.01.07210.1016/j.jmapro.2023.01.072 ↗
26. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
27. 10.3390/met804021110.3390/met8040211 ↗
28. 10.1520/CTR10195J10.1520/CTR10195J ↗
29. Tashiro M, , Kasahara A. Method of bonding graphite to metal. United States Pat, 1999;(19):1–5.
30. 10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
31. 10.1016/j.procir.2016.02.26210.1016/j.procir.2016.02.262 ↗
32. 10.1039/C7RA01823A10.1039/C7RA01823A ↗
33. 10.1016/j.optlastec.2013.03.02310.1016/j.optlastec.2013.03.023 ↗
34. Wang Y, , Shi J, , Lu S, et al. Solution and aging treatments of Inconel 718/TIC nanocomposite from selective laser melting. ASME 2016 11th Int Manuf Sci Eng Conf MSEC, 2016; 2016:3; doi: 10.1115/MSEC20168684
35. 10.1016/j.jallcom.2013.12.10710.1016/j.jallcom.2013.12.107 ↗
36. 10.1016/j.matchar.2015.06.02710.1016/j.matchar.2015.06.027 ↗
37. Moradi M, , Pourmand Z, , Hasani A, et al. Direct laser metal deposition (DLMD) additive manufacturing (AM) of Inconel 718 superalloy: Elemental, microstructural and physical properties evaluation. Optik (Stuttg), 2022; 259:1–27; doi: 10.1016/j.ijleo.2022.169018
38. 10.1007/s11661-014-2370-610.1007/s11661-014-2370-6 ↗
39. 10.3390/ma1111207010.3390/ma11112070 ↗
40. Li SH, , Kumar P, , Chandra S, et al. Directed energy deposition of metals: Processing, microstructures, and mechanical properties. Int Mater Rev, 2022; 60:1–43; doi: 10.1080/09506608.2022.2097411
41. 10.1007/s11665-021-05919-610.1007/s11665-021-05919-6 ↗