journal article·2021-02Open access

Full-field microscale strain measurements of a nitinol medical device using digital image correlation

Kenneth I. Aycock, Jason D. Weaver, Harshad M. Paranjape, Karthikeyan Senthilnathan, Craig Bonsignore, Brent A. Craven

Abstract

Computational modeling and simulation are commonly used during the development of cardiovascular implants to predict peak strains and strain amplitudes and to estimate the associated durability and fatigue life of these devices. However, simulation validation has historically relied on comparison with surrogate quantities like force and displacement due to barriers to direct strain measurement-most notably, the small spatial scale of these devices. We demonstrate the use of microscale two-dimensional digital image correlation (2D-DIC) to directly characterize full-field surface strains on a nitinol medical device coupon under emulated physiological and hyperphysiological loading. Experiments are performed using a digital optical microscope and a custom, temperature-controlled load frame. Following applicable recommendations from the International DIC Society, hardware and environmental heating studies, noise floor analyses, and in- and out-of-plane rigid body translation studies are first performed to characterize the microscale DIC setup. Uniaxial tension experiments are also performed using a polymeric test specimen to characterize the strain accuracy of the approach up to nominal stains of 5%. Sub-millimeter fields of view and sub-micron displacement accuracies (9nm mean error) are achieved, and systematic (mean) and random (standard deviation) errors in strain are each estimated to be approximately 1,000μϵ. The system is then demonstrated by acquiring measurements at the root of a 300μm-wide nitinol medical device strut undergoing fixed-free cantilever bending motion. Lüders-like transformation bands are observed originating from the tensile side of the strut that spread toward the neutral axis at an angle of approximately 55°. Despite the inherent limitations of optical microscopy and 2D-DIC, simple and relatively economical setups like that demonstrated herein could provide a practical and accessible solution for characterizing cardiovascular implant micromechanics, validating computational model strain predictions, and guiding the development of next-generation material models for simulating superelastic nitinol.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Optical measurement and interference techniques · Advanced Surface Polishing Techniques · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. ASME V&V 40 · 2018
2. Strain measurement by digital image correlation: influence of two types of speckle patterns made from rigid or deformable marks10.1111/j.1475-1305.2011.00831.x ↗
3. Digital volume correlation: three-dimensional strain mapping using X-ray tomography10.1007/BF02323555 ↗
4. Localization in NiTi tubes under bending10.1016/j.ijsolstr.2013.11.023 ↗
5. Evolution of localization in pseudoelastic NiTi tubes under biaxial stress states10.1016/j.ijplas.2016.01.017 ↗
6. py2DIC: A new free and open source software for displacement and strain measurements in the field of experimental mechanics10.3390/s19183832 ↗
7. Micro- and nanoscale deformation measurement of surface and internal planes via digital image correlation10.1007/s11340-006-0531-2 ↗
8. Local and global strains and strain ratios in shape memory alloys using digital image correlation10.1016/j.msea.2013.01.030 ↗
9. A comparative study of a NiTi alloy subjected to uniaxial monotonic and cyclic loading-unloading in tension using digital image correlation: the grain size effect10.1016/j.jallcom.2018.11.050 ↗
10. Ncorr: open-source 2D digital image correlation Matlab software10.1007/s11340-015-0009-1 ↗
11. The OpenCV library
12. Cyclic response and fatigue failure of Nitinol under tension–tension loading10.1557/jmr.2019.254 ↗
13. Applications of digital-image-correlation techniques to experimental mechanics10.1007/BF02325092 ↗
14. Stress-induced martensitic phase transformation in thin sheets of Nitinol10.1016/j.actamat.2007.02.011 ↗
15. Crack-tip stresses as computed from strains determined by stereoimaging10.1007/BF02320416 ↗
16. Experimental validation of a finite element model of the proximal femur using digital image correlation and a composite bone model10.1115/1.4003129 ↗
17. The measurement and interpretation of transformation temperatures in nitinol10.1007/s40830-017-0133-0 ↗
18. Full-field strain mapping by optical correlation of micrographs acquired during deformation10.1111/j.1365-2818.2005.01461.x ↗
19. Experimental validation of finite element models of intact and implanted composite hemipelvises using digital image correlation10.1115/1.4007173 ↗
20. Gianola · 2007
21. Microscale repeatability of the shape-memory effect in fine NiTi wires10.1007/s40830-016-0081-0 ↗
22. Experimental validation of finite element model for proximal composite femur using optical measurements10.1016/j.jmbbm.2013.02.006 ↗
23. Underlying material response for Lüders-like instabilities10.1016/j.ijplas.2012.12.002 ↗
24. Harilal, R., et al., 2014. Adaptation of open source 2D DIC software Ncorr for solid mechanics applications. In: Proceedings of the 9th International Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM ’14, New Delhi, 1–6, 2014, November.
25. On discontinuous plastic states, with special reference to localized necking in thin sheets10.1016/0022-5096(52)90003-3 ↗
26. Development and in vitro validation of a simplified numerical model for the design of a biomimetic femoral stem10.1016/j.jmbbm.2017.10.019 ↗
27. Propagation of phase transformation fronts in pseudoelastic NiTi tubes under uniaxial tension10.1016/j.eml.2017.06.006 ↗
28. Modeling of propagation of phase transformation fronts in NiTi under uniaxial tension10.1016/j.euromechsol.2017.02.004 ↗
29. Micro-scale deformation measurement using the digital image correlation technique and scanning electron microscope imaging10.1243/03093247JSA412 ↗
30. Jones · 2018
31. Experimental investigation of strain rate dependence of nanocrystalline Pt films10.1007/s11340-008-9212-7 ↗
32. Digital image correlation under scanning electron microscopy: methodology and validation10.1007/s11340-013-9782-x ↗
33. Quantitative Studies of microstructural phase transformation in Nickel–Titanium10.1016/j.matlet.2012.12.063 ↗
34. In-plane strain measurements on a microscopic scale by coupling digital image correlation and an in situ SEM technique10.1016/j.matchar.2005.08.004 ↗
35. Quality assessment of speckle patterns for digital image correlation10.1016/j.optlaseng.2005.10.004 ↗
36. Investigation of deformation at the grain scale in polycrystalline materials by coupling digital image correlation and digital microscopy10.1111/j.1747-1567.2010.00670.x ↗
37. 3D digital image correlation using single color camera pseudo-stereo system10.1016/j.optlastec.2017.03.030 ↗
38. Full-field thermal deformation measurements in a scanning electron microscope by 2D digital image correlation10.1007/s11340-007-9107-z ↗
39. Experimental and numerical analysis of the Lüders phenomenon in simple shear10.1016/j.ijsolstr.2016.07.026 ↗
40. Macroscopic stress–strain curve, local strain band behavior and the texture of NiTi thin sheets10.1088/0964-1726/18/5/055003 ↗
41. Nucleation, bifurcation and propagation of local deformation arising in NiTi shape memory alloy10.1088/0964-1726/16/1/020 ↗
42. Validated finite element models of the proximal femur using two-dimensional projected geometry and bone density10.1016/j.cmpb.2010.11.008 ↗
43. The use of digital image correlation in the biomechanical area: a review
44. Reliability-guided digital image correlation for image deformation measurement10.1364/AO.48.001535 ↗
45. Bias error reduction of digital image correlation using Gaussian pre-filtering10.1016/j.optlaseng.2013.04.009 ↗
46. Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals10.1088/1361-6501/aac55b ↗
47. Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements10.1016/j.optlaseng.2008.10.014 ↗
48. Fast, robust and accurate digital image correlation calculation without redundant computations10.1007/s11340-013-9717-6 ↗
49. Mean intensity gradient: an effective global parameter for quality assessment of the speckle patterns used in digital image correlation10.1016/j.optlaseng.2009.08.010 ↗
50. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review10.1088/0957-0233/20/6/062001 ↗
51. Single-camera microscopic stereo digital image correlation using a diffraction grating10.1364/OE.21.025056 ↗
52. Equivalence of digital image correlation criteria for pattern matching10.1364/AO.49.005501 ↗
53. High-accuracy 2D digital image correlation measurements with bilateral telecentric lenses: Error analysis and experimental verification10.1007/s11340-013-9774-x ↗
54. Phase transformation volume amplitude as a low-cycle fatigue indicator in nickel–titanium shape memory alloys10.1016/j.scriptamat.2019.12.014 ↗
55. Influences of granular constraints and surface effects on the heterogeneity of elastic, superelastic, and plastic responses of polycrystalline shape memory alloys10.1016/j.jmps.2017.02.007 ↗
56. Applicability analysis of validation evidence for biomedical computational models
57. Digital imaging techniques in experimental stress analysis10.1117/12.7972925 ↗
58. Focus errors and their correction in microscopic deformation analysis using correlation10.1364/OE.10.001361 ↗
59. Tension, compression, and bending of superelastic shape memory alloy tubes10.1016/j.jmps.2012.12.012 ↗
60. Tips and tricks for characterizing shape memory wire part 5: full-field strain measurement by digital image correlation10.1111/j.1747-1567.2011.00717.x ↗
61. Introduction to digital image correlation: best practices and applications10.1111/j.1747-1567.2011.00798.x ↗
62. DIC: a revolution in experimental mechanics10.1111/ext.12173 ↗
63. DIC challenge: developing images and guidelines for evaluating accuracy and resolution of 2D analyses10.1007/s11340-017-0349-0 ↗
64. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
65. Initiation and propagation of localized deformation in elasto-plastic strips under uniaxial tension10.1016/S0749-6419(97)00062-4 ↗
66. MultiDIC: An open-source toolbox for multi-view 3D digital image correlation10.1109/ACCESS.2018.2843725 ↗
67. Fourier-based interpolation bias prediction in digital image correlation10.1364/OE.23.019242 ↗
68. Measuring microscopic deformations with digital image correlation10.1016/S0143-8166(96)00041-3 ↗
69. AFM image reconstruction for deformation measurements by digital image correlation10.1088/0957-4484/17/4/016 ↗
70. Experimental validation of 3D printed patient-specific implants using digital image correlation and finite element analysis10.1016/j.compbiomed.2014.06.002 ↗
71. Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation10.1002/jbm.a.31268 ↗
72. Sutton · 2009
73. Determination of displacements using an improved digital correlation method10.1016/0262-8856(83)90064-1 ↗
74. The effect of out-of-plane motion on 2D and 3D digital image correlation measurements10.1016/j.optlaseng.2008.05.005 ↗
75. Validation of finite element models for strain analysis of implant-supported prostheses using digital image correlation10.1016/j.dental.2013.04.010 ↗
76. Turner · 2015
77. Submicron deformation field measurements: Part 2. Improved digital image correlation10.1007/BF02321649 ↗
78. Surface decoration for improving the accuracy of displacement measurements by digital image correlation in SEM10.1007/s11340-011-9568-y ↗
79. Nanoscale displacement measurement of electrostatically actuated micro-devices using optical microscopy and digital image correlation10.1016/j.sna.2010.05.014 ↗
80. High resolution in situ mapping of microstrain and microstructure evolution reveals damage resistance criteria in dual phase steels10.1016/j.actamat.2015.05.038 ↗
81. Accurate 3D shape, displacement and deformation measurement using a smartphone10.3390/s19030719 ↗
82. Fatigue resistance of branching phase-transformation fronts in pseudoelastic NiTi polycrystalline strips10.1016/j.ijsolstr.2017.11.023 ↗
83. Effects of Lüders-like bands on NiTi fatigue behaviors10.1016/j.ijsolstr.2015.12.021 ↗
84. Investigation on fatigue behaviors of NiTi polycrystalline strips under stress-controlled tension via in-situ macro-band observation10.1016/j.ijplas.2016.12.008 ↗
85. Heat transfer and temperature characteristics of a working digital camera10.3390/s20092561 ↗