Mechanics Based Tomography (MBT): Validation using experimental data
Source abstract
Abstract
Abstract Tomography based imaging is used in various disciplines with the most widely known as computed tomography (CT). In general, they have in common that a signal is measured on the specimen's surface and at multiple locations to reconstruct some type of a material property distribution using application specific constitutive equations. In this paper and for the first time with experimental validation, a novel tomography approach is successfully introduced based on the mechanics of solids. It utilizes the equations of equilibrium at its core embedded in an optimization framework to control the ill-posed nature of these problems. Measured signals are deformation fields obtained from a digital image correlation system with photo cameras. This work demonstrates the potential of mechanics based tomography (MBT) on a composite silicone material. This work encourages to investigate MBT as a breast tumor screening tool to visualize tumors based on their stiffness contrast. Another long-term goal could be to investigate the use of this methodology as a non-destructive testing tool for civil engineering structures such as bridges. Finally, this new methodology could potentially be miniaturized with stereoscopes and extended to map the material property distribution at the microstructure, e.g. grain length-scale.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Medical Imaging Techniques and Applications · Ultrasound Imaging and Elastography · Elasticity and Material Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Vicente · 2017
2. A comparison of different approaches for imaging cracks in composites by X-ray microtomography
3. 3-D nonlinear acoustic inverse scattering: algorithm and quantitative results10.1109/TUFFC.2017.2706189 ↗
4. Inverse identification of effective thermal conductivity based on surface temperature measurement: an analysis of effecting factors10.1615/HeatTransRes.2016011347 ↗
5. A novel inverse method for identification of 3D thermal conductivity coefficients of anisotropic media by the boundary element analysis10.1016/j.ijheatmasstransfer.2015.05.034 ↗
6. A computational algorithm to determine cracks from electrostatic boundary measurements10.1016/0020-7225(91)90166-Z ↗
7. A boundary element method for some inverse problems in elastodynamics10.1016/0307-904X(89)90074-7 ↗
8. A finite-difference algorithm for full waveform teleseismic tomography
9. Imaging quasi-vertical geological faults with earthquake data10.1111/j.1365-246X.2012.05424.x ↗
10. An inverse method for determining elastic material properties and material interface10.1002/nme.1620331004 ↗
11. Identification of material parameters of a hyper-elastic body with unknown boundary conditions10.1115/1.4039170 ↗
12. Phantom elasticity reconstruction with Digital Image Elasto-Tomography10.1016/j.jmbbm.2011.05.031 ↗
13. An inverse problem approach to stiffness mapping for early detection of breast cancer: tissue phantom experiments10.1080/17415977.2018.1538367 ↗
14. Characterization of the stiffness distribution in 2D and 3D using boundary deformations – A preliminary study10.1557/mrc.2018.98 ↗
15. Estimating the non-homogeneous elastic modulus distribution from surface deformations10.1016/j.ijsolstr.2016.01.001 ↗
16. Mechanics based tomography: a preliminary feasibility study. Sensors, Invited Article for Special Issue
17. Reddy · 2005
18. Reddy · 2013
19. Goenezen · 2011
20. Regularizing biomechanical maps for partially known material propertiese10.1142/S175882511750020X ↗
21. Study of dynamic underwater implosion mechanics using digital image correlation
22. Morozov's discrepancy principle and Tikhonov-type functionals10.1088/0266-5611/25/1/015015 ↗
23. The effect of out-of-plane motion on 2D and 3D digital image correlation measurements10.1016/j.optlaseng.2008.05.005 ↗
24. Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision10.1007/BF02322488 ↗
25. MultiDIC: an open-source toolbox for multi-view 3D digital image correlation10.1109/ACCESS.2018.2843725 ↗