journal article·2015-10

Experiments and modeling of ballistic penetration using an energy failure criterion

M. Dolinski, D. Rittel

Publisher page

Abstract

One of the most intricate problems in terminal ballistics is the physics underlying penetration and perforation. Several penetration modes are well identified, such as petalling, plugging, spall failure and fragmentation (Sedgwick, 1968). In most cases, the final target failure will combine those modes. Some of the failure modes can be due to brittle material behavior, but penetration of ductile targets by blunt projectiles, involving plugging in particular, is caused by excessive localized plasticity, with emphasis on adiabatic shear banding (ASB). Among the theories regarding the onset of ASB, new evidence was recently brought by Rittel et al. (2006), according to whom shear bands initiate as a result of dynamic recrystallization (DRX), a local softening mechanism driven by the stored energy of cold work. As such, ASB formation results from microstructural transformations, rather than from thermal softening. In our previous work (Dolinski et al., 2010), a failure criterion based on plastic strain energy density was presented and applied to model four different classical examples of dynamic failure involving ASB formation. According to this criterion, a material point starts to fail when the total plastic strain energy density reaches a critical value. Thereafter, the strength of the element decreases gradually to zero to mimic the actual material mechanical behavior. The goal of this paper is to present a new combined experimental-numerical study of ballistic penetration and perforation, using the above-mentioned failure criterion. Careful experiments are carried out using a single combination of AISI 4340 FSP projectiles and 25[mm] thick RHA steel plates, while the impact velocity, and hence the imparted damage, are systematically varied. We show that our failure model, which includes only one adjustable parameter in this present work, can faithfully reproduce each of the experiments without any further adjustment. Moreover, it is shown that the most common failure criterion based on a critical strain is simply inadequate to reproduce the results, due to the linear nature of the damage evolution. The advantages of the energy-based failure criterion are discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Abaqus, 2012. Finite Element Package (explicit), v6, 12-2, 6.7.1 ed. Dassault Systemes Simulia Corp., Providence, RI.
2. Bassim, M., Odeshi, A., Bolduc, M., 2013. Deformation and failure of a rolled homogeneous armour steel under dynamic mechanical loading in compression. ICF12, Ottawa 2009.
3. Simulation of brittle and ductile fracture in an impact loaded prenotched plate10.1023/B:FRAC.0000026364.13365.71 ↗
4. A computational model of viscoplasticity and ductile damage for impact and penetration10.1016/S0997-7538(01)01157-3 ↗
5. Ballistic penetration of steel plates10.1016/S0734-743X(99)00011-1 ↗
6. Strain Rate Dependence of the Spall Strength of Steels10.1051/jp4:19973160 ↗
7. Microscopic observations of adiabatic shear bands in three different steels10.1007/BF02698247 ↗
8. Ductility and the workability of metals
9. Modeling adiabatic shear failure from energy considerations10.1016/j.jmps.2010.08.007 ↗
10. Localization of plastic deformation during high strain rate torsion testing of rolled homogeneous armour10.1243/0309324011512748 ↗
11. Gray · 1994 · 21
12. Continuum theory of ductile rupture by void nucleation and growth: Part I – yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
13. Johnson, G.R., Cook, W.H., 1983. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th International Symposium on Ballistics, The Hague, The Netherlands, April, pp. 541–547.
14. Fracture characteristics of 3 metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
15. Shadow optical analysis of dynamic fracture10.1117/12.7976772 ↗
16. Finite element analysis of plugging failure in steel plates struck by blunt projectiles10.1115/1.3129722 ↗
17. An experimental study of the formation process of adiabatic shear bands in a structural steel10.1016/0022-5096(88)90012-9 ↗
18. Matuska, D.A., 1984. HULL User's Manual Air Force Armament Laboratory Report AFATL-TR-84-59.10.21236/ADA145000 ↗
19. On criteria for dynamic adiabatic shear band propagation10.1016/j.jmps.2006.12.006 ↗
20. Material rate dependence and mesh sensitivity in localization problems10.1016/0045-7825(88)90069-2 ↗
21. Scaling dynamic failure: a numerical study10.1016/j.ijimpeng.2014.02.011 ↗
22. On the dynamic character of localized failure10.1016/j.scriptamat.2012.07.001 ↗
23. The respective influence of microstructural and thermal softening on adiabatic shear localization10.1016/j.mechmat.2012.09.008 ↗
24. Dynamic perforation of viscoplastic plates by rigid projectiles10.1016/0020-7225(83)90105-2 ↗
25. Dynamic recrystallization as a potential cause for adiabatic shear failure10.1103/PhysRevLett.101.165501 ↗
26. Adiabatic shear failure and dynamic stored energy of cold work10.1103/PhysRevLett.96.075502 ↗
27. A failure criterion based on material instability10.1016/S0020-7683(03)00059-3 ↗
28. Sedgwick, R., 1968. Theoretical Terminal Ballistic Investigation and Studies of Impact at Low and Very High Velocities. DTIC Document.10.21236/AD0851948 ↗
29. Numerical investigations in penetration mechanics10.1016/0020-7225(78)90071-X ↗
30. Sur la fluidité et l'écoulement des corps solides
31. Effect of strain-rate on the deformation behavior of rolled-homogeneous-armor (RHA) steel at different hardnesses
32. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
33. Dynamically propagating shear bands in impact-loaded prenotched plates. I – experimental investigations of temperature signatures and propagation speed10.1016/0022-5096(96)00003-8 ↗
34. Dynamically propagating shear bands in impact-loaded prenotched plates. II – numerical Simulations10.1016/0022-5096(96)00004-X ↗