journal article·2012-07

Predicting the behaviour of structures under impact loads using geometrically distorted scaled models

R.E. Oshiro, M. Alves

Publisher page

Abstract

Abstract When a scaled structure (model or replica) is used to predict the response of a full-size compound (prototype), the model geometric dimensions should relate to the corresponding prototype dimensions by a single scaling factor. However, owing to manufacturing technical restrictions, this condition cannot be accomplished for some of the dimensions in real structures. Accordingly, the distorted geometry will not comply with the overall geometric scaling factor, infringing the Π theorem requirements for complete dynamic similarity. In the present study, a method which takes geometrical distortions into account is introduced, leading to a model similar to the prototype. As a means to infer the performance of this method, three analytical problems of structures subjected to dynamic loads are analysed. It is shown that the replica developed applying this technique is able to accurately predict the full-size structure behaviour even when the studied models have some of their dimensions severely distorted.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Impact failure of beams using damage mechanics: part I—analytical model10.1016/S0734-743X(02)00017-9 ↗
2. Impact failure of beams using damage mechanics: part II—application10.1016/S0734-743X(02)00018-0 ↗
3. Scaling the impact of mass on a structure10.1016/j.ijimpeng.2004.09.009 ↗
4. Scaling laws for elastoplastic fracture10.1023/A:1018683830486 ↗
5. The laws of similitude and crack propagation10.1016/0020-7403(74)90019-8 ↗
6. Baker · 1991
7. Barenblatt · 2003
8. Impact scalability of plated steel structures
9. Strain-rate and inertia effects in the collapse of two types of energy-absorbing structure10.1016/0020-7403(84)90021-3 ↗
10. An advanced method to correlate scale models with distorted configurations10.1115/1.1825044 ↗
11. Applying non-direct similitude technique to the dynamic bending collapse of rectangular section tubes10.1016/0734-743X(94)90066-T ↗
12. A membrane model for the response of thin plates to ballistic impact10.1016/0022-5096(77)90011-4 ↗
13. Fox · 1998
14. Replica model scaling for high strain-rate events10.1016/0734-743X(94)00065-5 ↗
15. Dynamic axial crush of aluminum alloy 6063-T6 circular tubes
16. Application of response number for dynamic plastic response of plates subjected to impulsive loading10.1016/S0308-0161(00)00082-X ↗
17. Experimental investigation into scaling laws for conical shells struck by projectiles10.1016/j.ijimpeng.2004.09.015 ↗
18. Some comments on the scaling of inelastic structures loaded dynamically
19. Jones · 1997
20. Johnson · 1972
21. Inertia effects in axisymmetrically deformed cylindrical shells under axial impact10.1016/S0734-743X(00)00028-2 ↗
22. Lemaitre · 1991
23. On dimensionless number for dynamic plastic response of structural members10.1007/s004199900072 ↗
24. Dynamic response of a rigid plastic clamped beam struck by a mass at any point on the span10.1016/0020-7683(88)90032-7 ↗
25. Crack propagation in non-proportionally scaled elastic structures10.1016/0020-7403(78)90033-4 ↗
26. A method for scaling ballistic penetration phenomena10.1016/S0734-743X(97)00020-1 ↗
27. Impact on HDPE and PVC plates—experimental tests and numerical simulations10.1016/j.ijimpeng.2009.12.004 ↗
28. Murphy · 1950
29. Scaling the response of circular plates subjected to large and close-range spherical explosions. Part I: air-blast loading10.1016/j.ijimpeng.2006.04.001 ↗
30. Scaling impacted structures10.1007/s00419-004-0343-8 ↗
31. Scaling of cylindrical shells under axial impact10.1016/j.ijimpeng.2006.02.003 ↗
32. Scaling of structures subject to impact loads when using a power law constitutive equation10.1016/j.ijsolstr.2009.05.014 ↗
33. Scaling of pulse loaded mild steel plates with different edge restraint10.1016/j.ijmecsci.2004.08.010 ↗
34. Generalization of response number for dynamic plastic response of shells subjected to impulsive loading10.1016/S0308-0161(01)00050-3 ↗
35. Skoglund · 1967
36. Impulse loading events and similarity scaling10.1016/j.engstruct.2009.12.014 ↗
37. Szirtes · 1997
38. Inertia and strain-rate effects in a simple plate-structure under impact loading10.1016/0734-743X(91)90044-G ↗
39. An impact dynamic analysis on a new crashworthy device against ship-bridge collision10.1016/j.ijimpeng.2007.12.005 ↗
40. The influence of inertia and strain-rate on large deformation of plate-structures under impact loading10.1016/S0045-7949(01)00093-1 ↗
41. Experimental investigation of the scaling laws for metal plates struck by large masses10.1016/0734-743X(93)90120-V ↗
42. How the airplane wing cut through the exterior columns of the World Trade Center10.1016/S0734-743X(02)00106-9 ↗
43. A study on collision buffer characteristic of sharp entrance angle bow structure10.1016/j.marstruc.2008.06.006 ↗
44. A note on a velocity sensitive energy-absorbing structure10.1016/0734-743X(89)90030-4 ↗
45. Suggestion of a new dimensionless number for dynamic plastic response of beams and plates10.1007/s004190050184 ↗