journal article·2019-03

Fracture mechanics of nacre-like materials using discrete-element models: Effects of microstructure, interfaces and randomness

Najmul Abid, J William Pro, Francois Barthelat

Publisher page

Abstract

Abstract Biological materials such as nacre, bone and spider silk boast unusual combinations of stiffness, strength and toughness. Behind this performance is the staggered arrangement of stiff and elongated inclusions embedded in a softer and more deformable matrix. In this study, we use the discrete element method (DEM) to simulate large fracture models of staggered composites (up to 450,000 tablets). The models explore the combined effects of tablet arrangement, interface properties and statistical variations on fracture mechanics: crack deflection, crack bridging, volumetric process zones of different size and shapes, transient and steady-state crack propagation regimes, full crack resistance curves. We find that moderate statistical variations in the microstructure increases toughness because the crack gets pinned into tougher regions. However, higher statistical variations generate very weak regions which can be activated far from the main crack, leading to discontinuous cohesive zones, sparse process zones, and an overall decrease in toughness. These results suggest an important rule for the design of nacre-like materials: microstructural randomness should be minimized to achieve the highest combinations of properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Calcium Carbonate Crystallization and Inhibition · Bone Tissue Engineering Materials · Paleontology and Stratigraphy of Fossils

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Discrete-element modeling of nacre-like materials: Effects of random microstructures on strain localization and mechanical performance10.1016/j.jmps.2017.11.003 ↗
2. Influence of initial flaws on the mechanical properties of nacre10.1016/j.jmbbm.2015.02.026 ↗
3. Toughening mechanisms in bioinspired multilayered materials10.1098/rsif.2014.0855 ↗
4. Bioinspired hydroxyapatite/poly (methyl methacrylate) composite with a nacre‐mimetic architecture by a bidirectional freezing method10.1002/adma.201504313 ↗
5. The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks10.1016/0021-8928(59)90157-1 ↗
6. On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure10.1016/j.jmps.2006.07.007 ↗
7. Nacre from mollusk shells: a model for high-performance structural materials10.1088/1748-3182/5/3/035001 ↗
8. Designing nacre-like materials for simultaneous stiffness, strength and toughness: Optimum materials, composition, microstructure and size10.1016/j.jmps.2014.08.008 ↗
9. Architectured materials in engineering and biology: fabrication, structure, mechanics and performance10.1179/1743280415Y.0000000008 ↗
10. An experimental investigation of deformation and fracture of Nacre–mother of pearl10.1007/s11340-007-9040-1 ↗
11. The quest for stiff, strong and tough hybrid materials: an exhaustive exploration10.1098/rsif.2013.0711 ↗
12. Toughness amplification in natural composites10.1016/j.jmps.2011.01.001 ↗
13. Structure and mechanics of interfaces in biological materials10.1038/natrevmats.2016.7 ↗
14. A novel biomimetic material duplicating the structure and mechanics of natural nacre10.1557/jmr.2011.65 ↗
15. Micromechanical models to guide the development of synthetic ‘brick and mortar'composites10.1016/j.jmps.2012.03.002 ↗
16. Large-scale parallel alignment of platelet-shaped particles through gravitational sedimentation10.1038/srep09984 ↗
17. The failure of fibre composites and adhesively bonded fibre composites under high rates of test10.1007/BF01151502 ↗
18. Bioinspired design and assembly of platelet reinforced polymer films10.1126/science.1148726 ↗
19. An improved method for testing the shear stress/strain behaviour of adhesives10.1016/0143-7496(93)90026-6 ↗
20. Discrete element modeling of microstructure of nacre10.1007/s40571-017-0162-7 ↗
21. Strain rate hardening: a hidden but critical mechanism for biological composites?10.1016/j.actbio.2014.08.027 ↗
22. Non-smooth mode I fracture of fibre-reinforced composites: an experimental, numerical and analytical study10.1098/rsta.2011.0381 ↗
23. Application of the effective crack method to mode I and mode II interlaminar fracture of carbon/epoxy unidirectional laminates10.1016/j.compositesa.2006.09.001 ↗
24. Freezing as a path to build complex composites10.1126/science.1120937 ↗
25. Yielding of steel sheets containing slits10.1016/0022-5096(60)90013-2 ↗
26. Tablet-level origin of toughening in abalone shells and translation to synthetic composite materials10.1038/ncomms1172 ↗
27. Mechanisms of toughening in rubber toughened polymers10.1016/0001-6160(86)90234-8 ↗
28. Fibrillar structure and mechanical properties of collagen10.1006/jsbi.1998.3966 ↗
29. Application of fracture mechanics concepts to hierarchical biomechanics of bone and bone-like materials10.1007/s10704-006-7156-4 ↗
30. Guo · 2006
31. Cooperative deformation of mineral and collagen in bone at the nanoscale10.1073/pnas.0604237103 ↗
32. Effects of bondline discontinuity during growth of interface cracks including stability and kinetic considerations10.1016/j.jmps.2018.04.002 ↗
33. On the fracture behaviour of CFRP bonded joints under mode I loading: Effect of supporting carrier and interface contamination10.1016/j.compscitech.2018.03.024 ↗
34. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
35. Effective toughness of heterogeneous media10.1016/j.jmps.2014.06.002 ↗
36. Modeling microarchitecture and mechanical behavior of nacre using 3D finite element techniques. Part 1. Elastic properties10.1023/A:1017528209162 ↗
37. Mechanics of tendon, from an engineering perspective10.1016/j.ijfatigue.2006.09.020 ↗
38. Nanoconfinement controls stiffness, strength and mechanical toughness of [beta]-sheet crystals in silk10.1038/nmat2704 ↗
39. A new view on J-integrals in elastic–plastic materials10.1007/s10704-013-9920-6 ↗
40. Lawn · 1993
41. Clay nanopaper with tough cellulose nanofiber matrix for fire retardancy and gas barrier functions10.1021/bm101296z ↗
42. Synthetic nacre by predesigned matrix-directed mineralization10.1126/science.aaf8991 ↗
43. Mathews · 2004 · 4
44. Rigid biological systems as models for synthetic composites10.1126/science.1116994 ↗
45. Nacre-like materials using a simple doctor blading technique: Fabrication, testing and modeling10.1016/j.jmbbm.2015.11.010 ↗
46. Tough, bio-inspired hybrid materials10.1126/science.1164865 ↗
47. A numerical study of void distribution effects on dynamic, ductile crack growth10.1016/0013-7944(91)90079-G ↗
48. Imposing periodic boundary condition on arbitrary meshes by polynomial interpolation10.1016/j.commatsci.2011.10.017 ↗
49. Role of the polymer phase in the mechanics of nacre-like composites10.1016/j.jmps.2016.06.011 ↗
50. Correlation of the arrangement pattern of enamel rods and secretory ameloblasts in pig and monkey teeth: a possible role of the terminal webs in ameloblast movement during secretion10.1002/ar.1092320403 ↗
51. Press · 2007 · 1256
52. GPU-based simulations of fracture in idealized brick and mortar composites10.1016/j.jmps.2015.03.011 ↗
53. The impact of stochastic microstructures on the macroscopic fracture properties of brick and mortar composites10.1016/j.eml.2015.09.001 ↗
54. Viscoelastic properties of collagen: synchrotron radiation investigations and structural model10.1098/rstb.2001.1033 ↗
55. Failure mode transition in nacre and bone-like materials10.1016/j.actbio.2010.04.008 ↗
56. Rice · 1979
57. Plane strain deformation near a crack tip in a power-law hardening material10.1016/0022-5096(68)90013-6 ↗
58. A path independent integral and the approximate analysis of strain concentration by notches and cracks10.1115/1.3601206 ↗
59. Effective toughness of heterogeneous brittle materials10.1016/S0997-7538(03)00078-0 ↗
60. Stress-strain experiments on individual collagen fibrils10.1529/biophysj.107.124602 ↗
61. J-integral and crack driving force in elastic–plastic materials10.1016/j.jmps.2008.04.003 ↗
62. Molecular mechanistic origin of the toughness of natural adhesives, fibres and composites10.1038/21607 ↗
63. Effect of inclusion density on ductile fracture toughness and roughness10.1016/j.jmps.2013.10.003 ↗
64. Tada · 1973
65. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids10.1016/0022-5096(92)90020-3 ↗
66. Self-assembly of microscopic tablets within polymeric thin films: a possible pathway towards new hybrid materials10.1039/C4RA15166F ↗
67. A laser-engraved glass duplicating the structure, mechanics and performance of natural nacre
68. Bioinspired structural materials10.1038/nmat4089 ↗