journal article·2013-03

Skeleton-and-bubble model of polyether-polyurethane elastic open-cell foams for finite element analysis at large deformations

Tapan Sabuwala, Gustavo Gioia

Publisher page

Abstract

Abstract We formulate a new micromechanical model of elastic open-cell (EOC) foams. In this model, the usual skeleton of open-cell foams is supplemented by fitting a thin-walled bubble within each cavity of the skeleton, as a substitute for the membranes that occlude the “windows” of the foam cells in polyether-polyurethane EOC foams. The model has nine parameters; each parameter has a clear geometrical or mechanical significance, and its value may be readily estimated for any given foam. To calibrate the model, we carry out fully nonlinear, three-dimensional finite-element simulations of the experiments of Dai et al. (2011a) , in which a set of five polyether-polyurethane EOC foams covering a range of commercially available relative densities was tested under compression along the rise direction, compression along a transverse direction, tension along the rise direction, simple shear combined with compression along the rise direction, and hydrostatic pressure combined with compression along the rise direction. We show that, with a suitable choice of the values of the parameters of the model, the model is capable of reproducing the most salient trends evinced in the experimental stress–stretch curves. Yet the model can no longer reproduce all of these trends if the bubbles be excluded from the model, and we conclude that the bubbles play a crucial role at large deformations. We also show that the stretch fields that obtain in our computational simulations are in good accord with the digital-image-correlation (DIC) measurements of Dai et al. For simple shear combined with compression along the rise direction, the DIC measurements of Dai et al. prove insufficient to our purposes, and we carry out DIC measurements of our own. To demonstrate the performance of the model in a typical application of polyether-polyurethane EOC foams, we carry out experiments and simulations of foam specimens loaded through a cylindrical punch and a spherical punch. We conclude the paper with a discussion of the contrasts and similarities between our model, in which the deformation is dominated by a phase transition, and the standard micromechanical model of EOC foams, in which the deformation is dominated by a bifurcation of equilibrium.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Foaming and Composites · Polymer composites and self-healing · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Artavia, Macosko, 1994. Polyurethane flexible foam formation. In: Low Density Cellular Plastics: Physical Basis of Behavior. Chapman and Hall, London.10.1007/978-94-011-1256-7_2 ↗
2. Tensile and compressive microspecimen testing of bulk nanoporous gold10.1007/s11837-009-0176-6 ↗
3. Barenblatt · 1986
4. Buerger · 1971
5. Mechanics of low density materials10.1016/0022-5096(86)90037-2 ↗
6. Experiments on elastic polyether polyurethane foams under multiaxial loading: mechanical response and strain fields10.1115/1.4003190 ↗
7. Lonsdaleite model of open-cell elastic foams10.1007/s10659-011-9332-7 ↗
8. Mechanical characterization of coatings using microbeam bending and digital image correlation techniques10.1007/s11340-008-9187-4 ↗
9. Eberl, C., Gianola, D.S., Thompson, R., 2006. Digital image correlation and tracking with matlab 〈http://www.mathworks.com/matlabcentral/fileexchange/12413〉.
10. A method for in situ measurement of the elastic behavior of a columnar thermal barrier coating10.1016/j.actamat.2011.02.034 ↗
11. Ericksen · 1988
12. Lonsdaleite, a hexagonal polymorph of diamond10.1038/214587a0 ↗
13. On the crushing response of random open-cell foams10.1016/j.ijsolstr.2012.03.003 ↗
14. The deformation of foamed elastic materials10.1002/app.1959.070010117 ↗
15. Stress-driven surface topography evolution in nanocrystalline al thin films10.1002/adma.200701607 ↗
16. Gibson, L.J., Ashby, M.F., 1982. The mechanics of three-dimensional cellular materials. Proc. R. Soc. Lond. Ser. A: Math. Phys. Eng. Sci. 382, 43–59 .10.1098/rspa.1982.0088 ↗
17. Gibson · 1997
18. Gioia, G., Wang, Y., Cuitiño, A.M., 2001. The energetics of heterogeneous deformation in open-cell solid foams. Proc. R. Soc. Lond. Ser. A: Math. Phys. Eng. Sci. 457 (2009), 1079–1096 .10.1098/rspa.2000.0707 ↗
19. Compressive response of open-cell foams. Part II10.1016/j.ijsolstr.2004.07.024 ↗
20. Compressive response of open-cell foams. Part I10.1016/j.ijsolstr.2004.07.023 ↗
21. Hibbit, Karlsson, Sorensen, 2005. ABAQUS/Standard User's Manual, Version 6.5. Hibbit, Karlsson, & Sorensen, Pawtucket, RI.
22. Hilyard · 1994
23. On the microstructure of open-cell foams and its effect on elastic properties10.1016/j.ijsolstr.2007.10.008 ↗
24. Macroscopic properties of open-cell foams based on micromechanical modeling
25. Deformation of foamed elastomers10.1177/0021955X6500100107 ↗
26. Microbuckling instability in elastomeric cellular solids10.1007/BF00414256 ↗
28. Characterization of nonlinear material parameters of foams based on indentation tests10.1016/j.matdes.2008.09.040 ↗
29. Micromechanical modeling of three-dimensional open-cell foams using the matrix method for spatial frames10.1016/j.compositesb.2004.09.002 ↗
30. Estimation of mechanical properties for rigid polyurethane foams10.1002/pen.760150810 ↗
31. Finite element models for the viscoelasticity of open-cell polyurethane foam10.1177/026248930602500502 ↗
32. The high strain mechanical response of the wet kelvin model for open-cell foams10.1016/j.ijsolstr.2006.04.014 ↗
33. Mills · 2007
34. Modeling the indentation of low-density polymer foams10.1177/026248930001900602 ↗
35. Buckling behavior of kelvin open-cell foams under [0 0 1], [0 1 1] and [1 1 1] compressive loads10.1016/j.ijsolstr.2007.10.021 ↗
36. Strain localization in open-cell polyurethane foams10.2140/jomms.2008.3.969 ↗
37. Perkowitz · 2001
38. Determination of elastomeric foam parameters for simulations of complex loading10.1080/10255840600747620 ↗
39. The influence of viscosity on the response of open-cell polymeric foams in uniaxial compression10.1007/s00161-011-0230-9 ↗
40. Identification of poisson's ratios of standard and auxetic low-density polymeric foams from full-field measurements10.1243/03093247JSA613 ↗
41. Modeling of dynamically loaded open-cell metallic foams10.1115/1.4000386 ↗
42. Modeling the dynamic response of visco-elastic open-cell foams10.1016/j.jmps.2007.11.007 ↗
43. Strain measurements of silicon dioxide microspecimens by digital imaging processing10.1007/s11340-006-9010-z ↗
44. Effect of cell membrane on mechanical properties of flexible polyurethane foams10.1143/JJAP.7.330 ↗
45. Szycher, M., 1999. Flexible and Semiflexible Foams, in Szycher's Handbook of Polyurethanes. CRC Press.10.1201/9781482273984 ↗
46. Elastic properties of open-cell foams with tetrakaidecahedral cells using finite element analysis10.2514/1.J050022 ↗
47. Characterization of deformation bands in the compression of cellular materials
48. Wang, Y., 2001. The Mechanics of Open-cell Solid Foams: Modeling, Simulation and Experiment. PhD Thesis. Rutgers, The State University of New Jersey, New Brunswick, NJ, August.
49. Three-dimensional nonlinear open-cell foams with large deformations10.1016/S0022-5096(99)00060-5 ↗
50. Full-field measurements of heterogeneous deformation patterns on polymeric foams using digital image correlation10.1016/S0020-7683(02)00176-2 ↗
51. The linear elastic properties of open foams10.1115/1.3173680 ↗
52. Linear elastic behavior of a low-density kelvin foam with open cells10.1115/1.2788983 ↗
53. Study of cell opening in flexible polyurethane foam10.1177/0021955X9603200502 ↗
54. Analysis of the elastic properties of open-cell foams with tetrakaidecahedral cells10.1016/S0022-5096(96)00090-7 ↗
55. Analysis of the high strain compression of open-cell foams10.1016/S0022-5096(97)00027-6 ↗