Fracture-mode map of brittle coatings: Theoretical development and experimental verification
Source abstract
Abstract
Brittle coatings, upon sufficiently high indentation load, tend to fracture through either ring cracking or radial cracking. In this paper, we systematically study the factors determining the fracture modes of bilayer material under indentation. By analyzing the stress field developed in a coating/substrate bilayer under indentation in combination with the application of the maximum-tensile-stress fracture criterion, we show that the fracture mode of brittle coatings due to indentation is determined synergistically by two dimensionless parameters being functions of the mechanical properties of coating and substrate, coating thickness and indenter tip radius. Such dependence can be graphically depicted by a diagram called ‘fracture-mode map’, whereby the fracture modes can be directly predicated based on these two dimensionless parameters. Experimental verification of the fracture-mode map is carried out by examining the fracture modes of fused quartz/cement bilayer materials under indentation. The experimental observation exhibits good agreement with the prediction by the fracture-mode map. Our finding in this paper may not only shed light on the mechanics accounting for the fracture modes of brittle coatings in bilayer structures but also pave a new avenue to combating catastrophic damage through fracture mode control.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Drilling and Well Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Measurement of hardness10.1002/andp.18912790505 ↗
2. Approximate model for the adhesive contact of viscoelastic spheres10.1021/la025959+ ↗
3. Adhesive contact to a coated elastic substrate10.1088/0022-3727/40/4/021 ↗
4. Materials design principles of ancient fish armor10.1038/nmat2231 ↗
5. Transverse fracture in thin-film coatings under spherical indentation10.1016/j.actamat.2004.10.006 ↗
6. Fracture mode transitions in brittle coatings on compliant substrates as a function of thickness10.1557/JMR.2004.0219 ↗
7. Fracture modes in brittle coatings with large interlayer modulus mismatch10.1557/JMR.1999.0514 ↗
8. Elastic contact versus indentation modeling of multi-layered materials10.1016/0020-7683(92)90004-D ↗
9. Gladwell · 1980
10. Mechanics of pharyngeal teeth of black carp (Mylopharyngodon piceus) crushing mollusk shells10.1002/adem.201200304 ↗
11. Surface forces and the adhesive contact of axisymmetric elastic bodies10.1080/00218460008034528 ↗
12. Johnson · 1985
13. Surface energy and contact of elastic solids10.1098/rspa.1971.0141 ↗
14. Fracture modes in human teeth10.1177/0022034508330055 ↗
15. Elastic filed of a thin-film/substrate system under an axisymmetric loading10.1016/S0020-7683(97)00053-X ↗
16. Deformation of elastic coatings in adhesive contacts with spherical probes10.1088/0022-3727/39/16/021 ↗
17. Influence of a hard surface layer on the limit of elastic contact. Part I: analysis using a real surface mode10.1115/1.2833525 ↗
18. Elastic contact to a coated half-space: effective elastic modulus and real penetration10.1557/jmr.2004.19.2.600 ↗
19. On the stability of loose earth10.1098/rstl.1857.0003 ↗
20. Arbitrary load distribution on a layered half space10.1115/1.1310330 ↗
21. Protection mechanisms of the iron-plated armor of a deep-sea hydrothermal vent gastropod10.1073/pnas.0912988107 ↗
22. Fracture mode control: a bio-inspired strategy to combat catastrophic damage10.1038/srep08011 ↗