journal article·2017-12

The stochastic transition from size dependent to size independent yield strength in metallic glasses

F.C. Li, S. Wang, Q.F. He, H. Zhang, B.A. Sun, Y. Lu, Y. Yang

Publisher page

Abstract

Abstract It has been an enduring and heated debate whether the yield strength of metallic glasses (MGs) is size dependent or size independent. In this work, we first develop a micromechanical model by taking into account the stochasticity for shear band initiation in microcompression. Our modeling is subsequently verified through the extensive in-situ and ex-situ microcompression experiments. Through the efforts of combined experiments and modeling, we show a size-controlled stochastic transition from the size dependent to the size independent yield strength in the MG micropillars. Such a stochastic transition is featured with a strong fluctuation in the measured yield strengths when the micropillar size is near an intrinsic length scale which varies with the chemical composition of MGs. In contrast, such a size-controlled transition appear deterministic with little data scattering in tension. At the fundamental level, our results unfold a size dependent shear band initiation process in MGs, which may be applicable to other amorphous materials of technological importance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Theoretical and Computational Physics · Material Dynamics and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. The structure and mechanical properties of bulk Zr50Ti16.5Cu15Ni18.5 metallic glasses10.1023/A:1017918121205 ↗
2. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
3. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
4. Variability in the yield strength of a metallic glass at micron and submicron length scales10.1016/j.actamat.2011.08.008 ↗
5. Compression testing of metallic glass at small length scales: effects on deformation mode and stability10.1016/j.actamat.2010.06.054 ↗
6. Tensile strength of whiskers10.1063/1.1722294 ↗
7. Plastic deformation of copper and silver whiskers10.1063/1.1722900 ↗
8. Structural processes that initiate shear localization in metallic glass10.1016/j.actamat.2009.07.016 ↗
9. Effects of size on the mechanical response of metallic glasses investigated through in situ TEM bending and compression experiments10.1016/j.actamat.2009.08.070 ↗
10. Intrinsic size effects in the mechanical response of taper-free nanopillars of metallic glass10.1103/PhysRevB.83.180201 ↗
11. Ductility and work hardening in nano-sized metallic glasses
12. Nanometallic glasses: size reduction brings ductility, surface state drives its extent10.1021/nl402384r ↗
13. Plastic flow in metallic glasses under compression10.1016/0036-9748(73)90143-9 ↗
14. Cold versus hot shear banding in bulk metallic glass
15. Intrinsic shear strength of metallic glass10.1016/j.actamat.2010.11.046 ↗
16. Strain gradient plasticity effect in indentation hardness of polymers10.1557/JMR.1999.0554 ↗
17. Effects of network morphology on the failure stress of highly porous media10.1103/PhysRevB.66.064206 ↗
18. Scaling of the failure stress of homophase and heterophase three-dimensional spring networks10.1103/PhysRevB.65.094104 ↗
19. Some notes on the correlation between fracture and defect statistics: are Weibull statistics valid for very small specimens?10.1016/j.jeurceramsoc.2005.08.021 ↗
20. Size-affected single-slip behavior of pure nickel microcrystals10.1016/j.actamat.2005.05.023 ↗
21. Micropillar compression studies on a bulk metallic glass in different structural states10.1016/j.scriptamat.2008.12.013 ↗
22. Dynamics of viscoplastic deformation in amorphous solids10.1103/PhysRevE.57.7192 ↗
23. Strength statistics of single crystals and metallic glasses under small stressed volumes10.1016/j.pmatsci.2016.05.002 ↗
24. Metallic glasses…on the threshold10.1016/S1369-7021(09)70037-9 ↗
25. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
26. Bulk metallic glasses: at the cutting edge of metals research10.1557/mrs2007.121 ↗
27. Plasticity in small-sized metallic systems: intrinsic versus extrinsic size effect10.1016/j.pmatsci.2011.01.005 ↗
28. Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients10.1016/j.actamat.2004.12.031 ↗
29. The return period of order statistics10.1007/BF01728934 ↗
30. A three-parameter Weibull statistical analysis of the strength variation of bulk metallic glasses10.1016/j.scriptamat.2009.07.038 ↗
31. An instability index of shear band for plasticity in metallic glasses10.1016/j.actamat.2008.11.018 ↗
32. New bulk metallic glasses for applications as magnetic-sensing, chemical, and structural materials10.1557/mrs2007.128 ↗
33. Transition from a strong-yet-brittle to a stronger-and-ductile state by size reduction of metallic glasses10.1038/nmat2622 ↗
34. Effects of size on the strength and deformation mechanism in Zr-based metallic glasses10.1016/j.ijplas.2010.09.010 ↗
35. Investigations of compressive strength on Cu-Hf-Al bulk metallic glasses: compositional dependence of malleability and Weibull statistics10.1016/j.intermet.2011.07.031 ↗
36. Shear-band toughness of bulk metallic glasses10.1016/j.actamat.2011.03.075 ↗
37. Fracture toughness study of new Zr-based Be-bearing bulk metallic glasses10.1016/j.scriptamat.2008.09.001 ↗
38. Capturing the stochastic mechanical behavior of micro and nanopillars10.1016/j.msea.2013.12.053 ↗
39. Bulk metallic glass: the smaller the better10.1002/adma.201002148 ↗
40. Nanomoulding with amorphous metals10.1038/nature07718 ↗
41. Intrinsic and extrinsic size effects in the deformation of metallic glass nanopillars10.1016/j.actamat.2011.11.023 ↗
42. Size effects and ductility of Al-based metallic glass10.1016/j.scriptamat.2012.05.019 ↗
43. Bulk and microscale compressive behavior of a Zr-based metallic glass10.1016/j.scriptamat.2008.01.009 ↗
44. Sample size effect and microcompression of Mg65Cu25Gd10 metallic glass
45. Assessing the critical sizes for shear band formation in metallic glasses from molecular dynamics simulation10.1063/1.2821832 ↗
46. Structural heterogeneity induced plasticity in bulk metallic glasses: from well-relaxed fragile glass to metal-like behavior
47. Li, W., Gao, Y., Bei, H., 2015. On the correlation between microscopic structural heterogeneity and embrittlement behavior in metallic glasses. 5, 14786.10.1038/srep14786 ↗
48. Fabrication and mechanical properties of WC particulate reinforced Cu47Ti33Zr11Ni6Sn2Si1 bulk metallic glass matrix composites10.1007/s10853-005-3168-0 ↗
49. Substantial tensile ductility in sputtered Zr-Ni-Al nano-sized metallic glass10.1016/j.actamat.2016.07.050 ↗
50. Recent developments in polymer MEMS10.1002/adma.200701709 ↗
51. The activation energy and volume of flow units of metallic glasses10.1016/j.scriptamat.2012.03.009 ↗
52. Flow unit perspective on room temperature homogeneous plastic deformation in metallic glasses10.1103/PhysRevLett.113.045501 ↗
53. Effect of ion irradiation on tensile ductility, strength and fictive temperature in metallic glass nanowires10.1016/j.actamat.2014.04.002 ↗
54. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
55. Initiation of shear bands near a stress concentration in metallic glass10.1016/j.actamat.2007.05.054 ↗
56. Weibull statistical fracture theory for the fracture of ceramics10.1007/BF02647012 ↗
57. Titanium-alloy MEMS wing technology for a micro aerial vehicle application10.1016/S0924-4247(00)00527-6 ↗
58. Silicon carbide as a new MEMS technology10.1016/S0924-4247(99)00335-0 ↗
59. Processing of bulk metallic glass10.1002/adma.200902776 ↗
60. Bulk metallic glasses for biomedical applications10.1007/s11837-009-0128-1 ↗
61. Bulk and microscale compressive properties of a Pd-based metallic glass10.1016/j.scriptamat.2007.05.025 ↗
62. Size-independent strength and deformation mode in compression of a Pd-based metallic glass10.1016/j.actamat.2008.06.028 ↗
63. Bulk metallic glass micro fuel cell10.1002/smll.201201647 ↗
64. Size-independent shear band formation in amorphous nanowires made from simulated casting10.1063/1.3340908 ↗
65. Mechanical properties of aluminum-rich AlFeGd metallic glass10.1016/S0036-9748(88)80261-8 ↗
66. Yield point of metallic glass10.1016/j.actamat.2006.05.024 ↗
67. Theory of shear banding in metallic glasses and molecular dynamics calculations10.2320/matertrans.MJ200769 ↗
68. Flow serration in a Zr-based bulk metallic glass in compression at low strain rates10.1016/j.intermet.2008.03.007 ↗
69. Flow serration and shear-band viscosity during inhomogeneous deformation of a Zr-based bulk metallic glass10.1016/j.intermet.2009.03.005 ↗
70. Direct measurements of shear band propagation in metallic glasses – an overview10.1016/j.intermet.2011.06.018 ↗
71. Capturing shear band propagation in a Zr-based metallic glass using a high-speed camera10.1016/j.scriptamat.2010.02.017 ↗
72. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
73. Origin of intermittent plastic flow and instability of shear band sliding in bulk metallic glasses10.1103/PhysRevLett.110.225501 ↗
74. Serrated flow and stick–slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass10.1016/j.actamat.2012.04.013 ↗
75. Mechanical characterization of nanofibers – a review10.1016/j.compscitech.2005.10.003 ↗
76. Room temperature plastic deformation behavior of ZrCuNiAl bulk metallic glasses10.1007/s12613-010-0313-9 ↗
77. Approaching the ideal elastic limit of metallic glasses10.1038/ncomms1619 ↗
78. Ductile necking behavior of nanoscale metallic glasses under uniaxial tension at room temperature10.1016/j.actamat.2013.05.001 ↗
79. Mechanical behavior of micronanoscaled metallic glasses10.1080/21663831.2015.1124298 ↗
80. Sample dimensions influence strength and crystal plasticity10.1126/science.1098993 ↗
81. Effect of sample size on deformation in amorphous metals10.1063/1.2884584 ↗
82. Sample size matters for Al88Fe7Gd5 metallic glass: smaller is stronger10.1016/j.actamat.2012.06.019 ↗
83. Effects of partial crystallization on compression and fatigue behavior of Zr-based bulk metallic glasses10.1557/jmr.2007.0059 ↗
84. Unusual fast secondary relaxation in metallic glass10.1038/ncomms8876 ↗
85. Size effect in microcompression of epoxy micropillars10.1007/s10853-012-6513-0 ↗
86. Softening-induced plastic flow instability and indentation size effect in metallic glass10.1016/j.jmps.2015.01.008 ↗
87. The breakdown of strength size scaling in spherical nanoindentation and microcompression of metallic glasses10.1016/j.scriptamat.2016.12.004 ↗
88. Ultrahigh-strength submicron-sized metallic glass wires10.1016/j.scriptamat.2014.04.005 ↗
89. Prevalence of shear banding in compression of Zr41Ti14Cu12.5Ni10Be22.5 pillars as small as 150 nm in diameter10.1016/j.actamat.2009.04.013 ↗
90. Effects of drawing on the tensile fracture strength and its reliability of small-sized metallic glasses10.1016/j.actamat.2009.12.043 ↗
91. Size effect on stability of shear-band propagation in bulk metallic glasses: an overview10.1007/s10853-011-5915-8 ↗
92. Metallic glasses: gaining plasticity for microsystems10.1007/s11837-010-0039-1 ↗
93. Characteristic length scales governing plasticity/brittleness of bulk metallic glasses at ambient temperature
94. Effects of specimen geometry and base material on the mechanical behavior of focused-ion-beam-fabricated metallic-glass micropillars10.1016/j.actamat.2008.11.043 ↗
95. Atomistic free-volume zones and inelastic deformation of metallic glasses10.1038/nmat2802 ↗
96. Study of the intrinsic ductile to brittle transition mechanism of metallic glasses10.1016/j.actamat.2009.08.029 ↗
97. Extraction of bulk metallic-glass yield strengths using tapered micropillars in micro-compression experiments10.1016/j.intermet.2009.08.011 ↗
98. Statistic analysis of the mechanical behavior of bulk metallic glasses10.1002/adem.200800380 ↗
99. Strong crystal size effect on deformation twinning10.1038/nature08692 ↗
100. The design of accurate micro-compression experiments10.1016/j.scriptamat.2005.06.043 ↗