A topology optimisation framework to design test specimens for one-shot identification or discovery of material models
Source abstract
Abstract
The increasing availability of full-field displacement data from imaging techniques in experimental mechanics is determining a gradual shift in the paradigm of material model calibration and discovery, from using several simple-geometry tests towards a few, or even one single test with complicated geometry. The feasibility of such a “one-shot” calibration or discovery heavily relies upon the richness of the measured displacement data, i.e., their ability to probe the space of the state variables and the stress space (whereby the stresses depend on the constitutive law being sought) to an extent sufficient for an accurate and robust calibration or discovery process. The richness of the displacement data is in turn directly governed by the specimen geometry. In this paper, we propose a density-based topology optimisation framework to optimally design the geometry of the target specimen for calibration of an anisotropic elastic material model. To this end, we perform automatic, high-resolution specimen design by maximising the robustness of the solution of the inverse problem, i.e., the identified material parameters, given noisy displacement measurements from digital image correlation. We discuss the choice of the cost function and the design of the topology optimisation framework, and we analyse a range of optimised topologies generated for the identification of isotropic and anisotropic elastic responses.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Topology Optimization in Engineering · Composite Structure Analysis and Optimization · Optical measurement and interference techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Experimental determination of elastic properties in laminate composite material orthotropic plies10.1007/s12206-024-0226-6 ↗
2. On the Development of a Heterogeneous Mechanical Test Specimen Using Topology Optimization10.1016/j.promfg.2020.04.256 ↗
3. Connections between topological sensitivity analysis and material interpolation schemes in topology optimization10.1007/s00158-010-0607-6 ↗
4. Efficient topology optimization in MATLAB using 88 lines of code10.1007/s00158-010-0594-7 ↗
5. Ascher · 2011
6. Design of mechanical heterogeneous specimens using topology optimization10.1016/j.ijmecsci.2020.105764 ↗
7. Optimal shape design as a material distribution problem10.1007/BF01650949 ↗
8. Material interpolation schemes in topology optimization
9. Bendsøe · 2004 · 381
10. Optimization of a Cruciform Specimen Geometry for the Identification of Constitutive Parameters Based Upon Full-Field Measurements10.1111/str.12178 ↗
11. Filters in topology optimization10.1002/nme.116 ↗
12. Topology optimization of non-linear elastic structures and compliant mechanisms10.1016/S0045-7825(00)00278-4 ↗
13. Coupling between topology optimization and digital image correlation for the design of specimen dedicated to selected material parameters identification10.1016/j.ijsolstr.2020.02.032 ↗
14. Spline-based specimen shape optimization for robust material model calibration10.1186/s40323-022-00217-9 ↗
15. Design and validation of a heterogeneous interior notched specimen for inverse material parameter identification10.1016/j.finel.2022.103866 ↗
16. Unsupervised discovery of interpretable hyperelastic constitutive laws10.1016/j.cma.2021.113852 ↗
17. Discovering plasticity models without stress data10.1038/s41524-022-00752-4 ↗
18. Automated discovery of generalized standard material models with EUCLID10.1016/j.cma.2022.115867 ↗
19. A method for the simultaneous identification of anisotropic yield and hardening constitutive parameters for sheet metal forming10.1016/j.ijmecsci.2020.105756 ↗
20. On the design of mechanical heterogeneous specimens using multilevel topology optimization10.1016/j.advengsoft.2022.103314 ↗
21. A T-shaped specimen for the direct characterization of orthotropic materials10.1002/(SICI)1097-0207(19980130)41:2<293::AID-NME284>3.0.CO;2-Y ↗
22. Gu · 2016 · 1
23. A new characterisation method for rubber10.1016/j.polymertesting.2009.06.001 ↗
24. Achieving minimum length scale in topology optimization using nodal design variables and projection functions10.1002/nme.1064 ↗
25. Seeking the most informative design of test specimens for learning constitutive models10.1016/j.eml.2024.102169 ↗
26. Johnson · 2012
27. Parameter covariance and non-uniqueness in material model calibration using the Virtual Fields Method10.1016/j.commatsci.2018.05.037 ↗
28. Determination of Anisotropic Plastic Constitutive Parameters Using the Virtual Fields Method10.1007/s11340-014-9879-x ↗
29. Filters in topology optimization based on Helmholtz-type differential equations10.1002/nme.3072 ↗
30. Modified semi-circular bend test to determine the fracture toughness of anisotropic rocks10.1016/j.engfracmech.2019.03.008 ↗
31. Towards Material Testing 2.0. A review of test design for identification of constitutive parameters from full-field measurements10.1111/str.12370 ↗
32. Identification of the Orthotropic Elastic Stiffnesses of Composites with the Virtual Fields Method: Sensitivity Study and Experimental Validation10.1111/j.1475-1305.2007.00346.x ↗
33. Benchmarking optimization solvers for structural topology optimization10.1007/s00158-015-1250-z ↗
34. Morphology-based black and white filters for topology optimization10.1007/s00158-006-0087-x ↗
35. Manufacturing tolerant topology optimization10.1007/s10409-009-0240-z ↗
36. Topology optimization approaches10.1007/s00158-013-0978-6 ↗
37. A numerical methodology to design heterogeneous mechanical tests10.1016/j.ijmecsci.2016.01.021 ↗
38. Design of an indicator to characterize and classify mechanical tests for sheet metals10.1016/j.ijmecsci.2015.07.026 ↗
39. Model-free data-driven methods in mechanics: material data identification and solvers10.1007/s00466-019-01731-1 ↗
40. The method of moving asymptotes—a new method for structural optimization10.1002/nme.1620240207 ↗
41. The MathWorks Inc. · 2024
42. The MathWorks Inc. · 2024
43. The MathWorks Inc. · 2024
44. Experimental Determination of the Elastic Behavior of Orthotropic Plates10.1115/1.3670829 ↗
45. The anti-dogbone: Evaluating and designing optimal tensile specimens for deep learning of constitutive relations10.1016/j.eml.2024.102157 ↗
46. On projection methods, convergence and robust formulations in topology optimization10.1007/s00158-010-0602-y ↗
47. Volume preserving nonlinear density filter based on heaviside functions10.1007/s00158-009-0452-7 ↗
48. Enhancing the information-richness of sheet metal specimens for inverse identification of plastic anisotropy through strain fields10.1016/j.ijmecsci.2021.106891 ↗