journal article·2023-06

A framework to simulate the crack initiation and propagation in very-high-cycle fatigue of an additively manufactured AlSi10Mg alloy

Jingyu Sun, Guian Qian, Jianghua Li, Ruiyang Li, Zhimo Jian, Youshi Hong, Filippo Berto

Publisher page

Abstract

Currently, no systematic approach exists to simulate the crack initiation and propagation process in very-high-cycle fatigue including the microstructure sensitivity. A combined crystal plasticity and cohesive zone model based computational framework is developed to simulate the defect-induced short crack growth of an additively manufactured AlSi10Mg alloy. The crystal plasticity formulation is used to model the anisotropic deformation in the grains. The accumulated plastic shear strain obtained by the crystal plasticity is introduced into the cohesive zone model as the crack initiation damage evolution criteria. The total damage is suggested to be divided into static damage, fatigue initiation damage and fatigue propagation damage. The framework can control the crack growth rate and the proportion of crack initiation damage in the total damage. Besides, an acceleration strategy is proposed to accelerate the computational efficiency for the very-high-cycle fatigue (VHCF). It provides an equivalence of loading cycles and the computational efficiency and accuracy are controlled by the acceleration factor. The internal defect induced short crack initiation and propagation of VHCF are investigated experimentally and simulated by the proposed framework. Experimental observations of tortuous crack paths and fine grain regions are reasonably well captured by the simulation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Aluminum Alloys Composites Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Prediction of softening kinetics and recrystallization texture in non-isothermally annealed bulged tubes using CPFEM and CA models10.1016/j.msea.2021.142308 ↗
2. On the transition from plastic deformation to crack initiation in the high- and very high-cycle fatigue regimes in plain carbon steels10.1016/j.ijfatigue.2016.04.003 ↗
3. The mathematical theory of equilibrium cracks in brittle fracture
4. Additive manufacturing processes for metals and effects of defects on mechanical strength: A review10.1016/j.prostr.2021.10.057 ↗
5. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus10.1016/0266-3538(96)00005-X ↗
6. Competing mechanisms of particle fracture, decohesion and slip-driven fatigue crack nucleation in a PM nickel superalloy10.1016/j.ijfatigue.2020.105573 ↗
7. Numerical investigation of the influence of rolling texture and microstructure on fatigue crack initiation in BCC polycrystals10.1016/j.ijfatigue.2017.10.019 ↗
8. Experiment and non-local crystal plasticity finite element study of nanoindentation on Al-8Ce-10Mg alloy10.1016/j.ijsolstr.2021.111233 ↗
9. Experimental and computational investigation of weathering steel Q450NQR1 under high cycle fatigue loading via crystal plasticity finite element method10.1016/j.ijfatigue.2022.106772 ↗
10. Yielding of steel sheets containing slits10.1016/0022-5096(60)90013-2 ↗
11. The influence of the characteristic microstructure of additively manufactured AlSi10Mg on the plastic behaviour at various strain rates10.1016/j.matdes.2022.111112 ↗
12. Three-dimensional study of rolling contact fatigue using crystal plasticity and cohesive zone method10.1016/j.ijfatigue.2019.105208 ↗
13. Microstructure-based fatigue modeling with residual stresses: Effect of inclusion shape on very high cycle fatigue life10.3390/cryst12020200 ↗
14. Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels10.1016/j.ijfatigue.2013.02.023 ↗
15. The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels10.1016/j.ijfatigue.2015.11.029 ↗
16. Investigation of grain boundary and orientation effects in polycrystalline metals by a dislocation-based crystal plasticity model10.1016/j.commatsci.2018.12.010 ↗
17. High-resolution multiscale modeling of mechanical behavior of cold-drawn pearlitic steels10.1016/j.jmrt.2021.10.087 ↗
18. Influence of reversible and non-reversible fatigue on the microstructure and mechanical property evolution of 7075-T6 aluminum alloy10.1016/j.ijfatigue.2020.106094 ↗
19. Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes10.1016/j.ijfatigue.2020.106013 ↗
20. Mechanistic fatigue in Ni-based superalloy single crystals: A study of crack paths and growth rates10.1016/j.jmps.2021.104663 ↗
21. Effect of misorientation on the fatigue life of nickel-base single crystal superalloy DD5 at 980 °C10.1016/j.ijfatigue.2021.106479 ↗
22. Very-high-cycle fatigue induced growth and amorphization of Si particles in additively manufactured AlSi10Mg alloy: Dependence of applied stress ratio10.1016/j.ijfatigue.2022.107167 ↗
23. Defect-induced cracking and fine granular characteristics in very-high-cycle fatigue of laser powder bed fusion AlSi10Mg alloy10.1016/j.ijfatigue.2022.106770 ↗
24. A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys10.1016/j.ijplas.2016.09.008 ↗
25. A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility10.1016/j.actamat.2015.05.017 ↗
26. Assessment of low cycle fatigue crack growth under mixed-mode loading conditions by using a cohesive zone model10.1016/j.ijfatigue.2015.01.008 ↗
27. A reduced-input cohesive zone model with regularized extended finite element method for fatigue analysis of laminated composites in Abaqus10.1016/j.compstruct.2021.114494 ↗
28. Modeling damage evolution of Graphene/Aluminum composites considering crystal cracking and interface failure10.1016/j.compstruct.2021.113863 ↗
29. Additive manufacturing of structural materials10.1016/j.mser.2020.100596 ↗
30. Integrated crystal plasticity and phase field model for prediction of recrystallization texture and anisotropic mechanical properties of cold-rolled ultra-low carbon steels10.1016/j.ijplas.2019.102644 ↗
31. Role of hydrogen in the separation of interfaces in S13Cr supermartensitic stainless steel10.1016/j.actamat.2020.116614 ↗
32. On crystallographic aspects of heterogeneous plastic flow during ductile tearing: 3D measurements and crystal plasticity simulations for AA7075-T65110.1016/j.ijplas.2021.103028 ↗
33. Cyclic slip irreversibilities and the evolution of fatigue damage10.1007/s11663-009-9240-4 ↗
34. 5 - effect of hardness HV on fatigue limits of materials containing defects, and fatigue limit prediction equations
35. A discrete element modelling approach for fatigue damage growth in cemented materials10.1016/j.ijplas.2018.08.007 ↗
36. A fracture mechanics approach to interior fatigue crack growth in the very high cycle regime10.1016/j.engfracmech.2013.11.007 ↗
37. Finite element approach for modelling fatigue damage in ®bre-Reinforced composite materials
38. High-cycle and very-high-cycle fatigue behaviour of a titanium alloy with equiaxed microstructure under different mean stresses10.1111/ffe.13050 ↗
39. Nanograin formation in dimple ridges due to local severe-plastic-deformation during ductile fracture10.1016/j.scriptamat.2020.113631 ↗
40. Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion10.1016/j.actamat.2021.116869 ↗
41. An analysis of nonuniform and localized deformation in ductile single crystals10.1016/0001-6160(82)90005-0 ↗
42. A tangent modulus method for rate dependent solids10.1016/0045-7949(84)90033-6 ↗
43. Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selective laser melting: Effect of build orientation and mean stress10.1016/j.ijfatigue.2020.105696 ↗
44. In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy10.1016/j.ijfatigue.2021.106616 ↗
45. FGA formation mechanism for X10CrNiMoV12-2-2 and 34CrNiMo6 for constant and variable amplitude tests under the influence of applied mean loads10.1111/ffe.12797 ↗
46. An irreversible cohesive zone model for interface fatigue crack growth simulation10.1016/S0013-7944(02)00034-6 ↗
47. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
48. Effect of grain orientations on fracture behavior of polycrystalline metals10.1016/j.jmps.2021.104384 ↗
49. A computational framework for predicting the fracture toughness of metals as function of microstructure10.1016/j.jmps.2020.103955 ↗
50. Microscopic and nanoscopic observations of metallurgical structures around inclusions at interior crack initiation site for a bearing steel in very high-cycle fatigue10.1111/ffe.12344 ↗
51. Influence of mean stress and variable amplitude loading on the fatigue behaviour of a high-strength steel in VHCF regime10.1016/j.ijfatigue.2013.04.015 ↗
52. The effect of stress state and strain partition mode on the damage behavior of a Mg-Ca alloy10.1016/j.ijplas.2021.103040 ↗
53. A unified fracture criterion considering stress state dependent transition of failure mechanisms in bcc steels at –196 °C10.1016/j.ijplas.2022.103365 ↗
54. Subsurface crack initiation and propagation mechanism in high-strength steel in a very high cycle fatigue regime10.1016/j.ijfatigue.2005.08.015 ↗
55. Experimental characterization of short crack nucleation and growth during cycling in lean duplex stainless steels10.1016/j.ijfatigue.2013.08.023 ↗
56. Nanograin layer formation at Crack Initiation Region for very-high-cycle fatigue of a Ti-6Al-4V alloy10.1111/ffe.12562 ↗
57. Nanograin formation and cracking mechanism in Ti alloys under very high cycle fatigue loading
58. Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness10.1016/j.compstruct.2010.01.012 ↗
59. Simulation of delamination in composites under high-cycle fatigue10.1016/j.compositesa.2006.11.009 ↗
60. High-cycle fatigue crack initiation and propagation behaviour of high-strength spring steel wires
61. Role of matrix resin in delamination onset and growth in composite laminates10.1016/0266-3538(88)90043-7 ↗
62. Critical remarks to cohesive zone modeling for three-dimensional elastoplastic fatigue crack propagation10.1016/j.engfracmech.2018.03.018 ↗
63. High-cycle and very-high-cycle fatigue lifetime prediction of additively manufactured AlSi10Mg via crystal plasticity finite element method10.1016/j.ijfatigue.2021.106577 ↗
64. Fine Granular Area formation by damage-induced shear strain localization in very-high-cycle fatigue10.1111/ffe.13529 ↗
65. Fatigue crack propagation within Al-Cu-Mg single crystals based on crystal plasticity and XFEM combined with cohesive zone model10.1016/j.matdes.2021.110015 ↗
66. Fatigue life and mechanistic modeling of interior micro-defect induced cracking in high cycle and very high cycle regimes10.1016/j.actamat.2018.07.036 ↗