Flexible and Conducting Metal-Fabric Composites Using the Flame Spray Process for the Production of Li-Ion Batteries
Source abstract
Abstract
The wire flame spray process was used to produce electrically conductive and flexible Al coatings onto diverse textile fabrics. The investigation studied the influence of the spraying parameters and fabric materials on the electrical conductivity of the metal-fabric composites. Furthermore, this study showed that the production of flexible Li-ion batteries having good electrical properties based on the use of such flame-sprayed aluminium cathode current collectors is viable. Results show that a coating quantity threshold of about 20 mg/cm2 exists to obtain a sufficient electrical surface conductivity for a commercial use of the produced metal-fabric composites. An excellent electrical surface conductivity of the composites (about 500 SA) could be achieved through an adequate optimization of the spraying parameters. This conductivity increase enabled a reduction of the coating quantity and thus the flexibility of the fabric materials is better conserved, rendering the use of such composites for flexible batteries even more interesting. This study showed that the production of electrically conductive and flexible metal-fabric composites having sufficient electrical conductivity for the manufacture of flexible Li ions batteries is possible. This new method of producing such batteries represents an alternative to other chemically based processes which are hazardous to the environment because of their chemical nature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and Waste Management Techniques · Electromagnetic wave absorption materials · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. J.F.M. Oudenhoven, L. Baggetto, and P.H.L. Notten, All-Solid-State Lithium-Ion Microbatteries: A Review of Various Three-Dimensional Concepts, Adv. Energy Mater., 2011, 1, p 10-3310.1002/aenm.201000002 ↗
2. M. Morandin, F. Maréchal, M. Mercangöz, and F. Buchter, Conceptual Design of a Thermo-Electrical Energy Storage System Based on Heat Integration of Thermodynamic Cycles—Part A: Methodology and Base Case, Energy, 2012, 45, p 375-38510.1016/j.energy.2012.03.031 ↗
3. H. Chen, T. Ngoc Cong, W. Yang, C. Tan, Y. Li, and Y. Ding, Progress in Electrical Energy Storage System: A Critical Review, Prog. Nat. Sci., 2009, 19, p 291-31210.1016/j.pnsc.2008.07.014 ↗
4. F. Díaz-Gonzáleza, A. Sumpera, O. Gomis-Bellmunta, and R. Villafáfila-Robles, A Review of Energy Storage Technologies for Wind Power Applications, Renew. Sustain. Energy Rev., 2012, 16, p 2154-217110.1016/j.rser.2012.01.029 ↗
5. J.-S. Lee, S.T. Kim, R. Cao, N.-S. Choi, M. Liu, K.T. Lee, and J. Cho, Metal-Air Batteries with High Energy Density: Li-Air Versus Zn-Air, Adv. Energy Mater., 2011, 1, p 34-5010.1002/aenm.201000010 ↗
6. J. Baker, New Technology and Possible Advances in Energy Storage, Energy Policy, 2008, 36, p 4368-437310.1016/j.enpol.2008.09.040 ↗
7. X. Tan, Q. Li, and H. Wanga, Advances and Trends of Energy Storage Technology in Microgrid, Electr. Power Energy Syst., 2012, 44, p 179-19110.1016/j.ijepes.2012.07.015 ↗
8. N.S. Wadea, P.C. Taylor, P.D. Lang, and P.R. Jones, Evaluating the Benefits of an Electrical Energy Storage System in a Future Smart Grid, Energy Policy, 2010, 38, p 7180-718810.1016/j.enpol.2010.07.045 ↗
9. M. Peter, Smart T-Shirt Monitors the Heart (Intelligentes T-Shirt überwacht das Herz), EMPA News, 2006, 3, p. 3 (in German)
10. S.K. Bahadira, V. Koncara, and F. Kalaoglu, Wearable Obstacle Detection System Fully Integrated to Textile Structures for Visually Impaired People, Sens. Actuators A, 2012, 179, p 297-31110.1016/j.sna.2012.02.027 ↗
11. P. Jourand, H. De Clercq, and R. Puers, Robust Monitoring of Vital Signs Integrated in Textile, Sens. Actuators A, 2010, 161, p 288-29610.1016/j.sna.2010.05.002 ↗
12. T. Kinkeldei, C. Zysset, N. Münzenrieder, and G. Tröster, An Electronic Nose on Flexible Substrates Integrated into a Smart Textile, Sens. Actuators B, 2012, doi: 10.1016/j.snb.2012.08.02310.1016/j.snb.2012.08.023 ↗
13. A. Varesano, B. Antognozzi, and C. Tonin, Electrically Conducting-Adhesive Coating on Polyamide Fabrics, Synth. Met., 2010, 160, p 1683-168710.1016/j.synthmet.2010.05.041 ↗
14. C.-H. Xuea, J. Chena, W. Yina, S.-T. Jia, and J.-Z. Maa, Superhydrophobic Conductive Textiles with Antibacterial Property by Coating Fibers with Silver Nanoparticles, Appl. Surf. Sci., 2012, 258, p 2468-247210.1016/j.apsusc.2011.10.074 ↗
15. R. Morent, N. De Geyter, J. Verschuren, K. De Clerck, P. Kiekens, and C. Leys, Non-Thermal Plasma Treatment of Textiles, Surf. Coat. Technol., 2008, 202, p 3427-344910.1016/j.surfcoat.2007.12.027 ↗
16. Anonymous, Metallic Coatings makes Fibers and Fabrics functional, (Metallüberzug macht Fasern und Textilien funktionell), EMPA News, 2006, 2, p. 4 (in German)
17. H. Kabir, “Influences and Charaterization of the Coating Properties of Metallized Fabrics (Beeinflussung und Charakterisierung von Schichteigenschaften metallisierter Textilien),” Ph.D. thesis, TU Dresden, 2004, 162 pp. (in German)
18. X.L. Zhou, A.F. Chen, J.C. Liu, X.K. Wu, and J.S. Zhang, Preparation of Metallic Coatings on Polymer Matrix Composites by Cold Spray, Surf. Coat. Technol., 2011, 206, p 132-13610.1016/j.surfcoat.2011.07.005 ↗
19. R. Lupoi and W. O’Neill, Deposition of Metallic Coatings on Polymer Surfaces Using Cold Spray, Surf. Coat. Technol., 2010, 205, p 2167-217310.1016/j.surfcoat.2010.08.128 ↗
20. K. Götz, M. Ott, and G. Reichinger, Flamecon—Thermal Spraying of Conductor Tracks on Plastics (Flamecon—thermisches Spritzen von Leiterzügen auf Kunststoffen), PLUS 10/2003, Vol 5, Eugen G. Leuze Verlag, Bad Saulgau, 2003, p. 1578-1580 (in German)
21. SPRAYTEC—Low Cost Thermally Sprayed and Structured Conductive Layers for Power Electronic Printed Circuit Boards, Sixth-Framework European Research Program Project No.: FP6-0182271, Final Report, 13 pp
22. K. Niessen and R. Gadow, Thermally Sprayed Ceramic Coatings on Flexible Fiber Woven Fabrics, International Thermal Spray Conference 2002, E. Lugscheider, Ed., DVS—German Welding Society, Essen, March 2002, p. 220-22410.31399/asm.cp.itsc2002p0220 ↗
23. R. Gadow and K. Niessen, Continuous Coating of Technical Textiles from “Coil to Coil”, International Thermal Spray Conference 2005, E. Lugscheider, Ed., DVS—German Welding Society, Basel, May 2005, p. 454-45910.31399/asm.cp.itsc2005p0454 ↗
24. J. Voyer, P. Schulz, and M. Schreiber, Conducting Flame-Sprayed Al Coatings on Textile Fabrics, J. Therm. Spray Technol., 2008, 17(4), p 583-58810.1007/s11666-008-9213-1 ↗
25. J. Voyer, P. Schulz, and M. Schreiber, Electrically Conductive Flame Sprayed Aluminum Coatings on Textile Substrates, J. Therm. Spray Technol., 2008, 17(5-6), p 818-82310.1007/s11666-008-9228-7 ↗