Energy Release Characteristics of Ni–Al–CuO Ternary Energetic Structural Material Processed by Cold Spraying
Source abstract
Abstract
Ternary energetic structural material (ESM) Ni–Al–CuO was prepared by cold spraying, and its mechanical properties studied under quasi-static-state and dynamic compression conditions. Energy release characteristics including the ignition temperature, energy release, and combustion wave velocity were characterized in both the thermal explosion and self-propagating combustion modes. The results reveal that the yield stress of Ni–Al–CuO is 50 MPa higher than that of Ni–Al. The initial reaction temperature was found to be 450 °C, much lower than the temperature of the reaction between Al and CuO and corresponding to the reaction of Ni and Al. In addition, more energy was released by Ni–Al–CuO ESM (859.2 J/g) than by Ni–Al (735.4 J/g). The combustion wave velocity of the Ni–Al–CuO coating was about 90 mm/s. Self-propagating combustion of Ni–Al–CuO proceeded via a multistage reaction, during which the Al–CuO reaction was triggered by the Ni–Al reaction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Energetic Materials and Combustion · Rocket and propulsion systems research · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. R.J. Lee Jr, W.M. Carney et al., in AIP Conference Proceedings. Reactive Materials Studies. (2006)10.1063/1.2263291 ↗
2. P. Church, Investigation of a Nickel-Aluminum Reactive Shaped Charge Liner, J. Appl. Mech., 2013, 80(3), p 03170110.1115/1.4023339 ↗
3. L.S. Magness, High Strain Rate Deformation Behaviors of Kinetic Energy Penetrator Materials during Ballistic Impact, Mech. Mater., 1994, 17(2-3), p 147-15410.1016/0167-6636(94)90055-8 ↗
4. J.P. Hooper, C.L. Milby, R.J. Lee et al., High-Velocity Impact Fragmentation of Brittle, Granular Aluminum Spheres, Proc. Eng., 2013, 58, p 663-67110.1016/j.proeng.2013.05.076 ↗
5. M.J. Cherukara, T.P. Weihs, and A. Strachan, Molecular Dynamics Simulations of the Reaction Mechanism in Ni/Al Reactive Intermetallics, Acta Mater., 2015, 96, p 1-910.1016/j.actamat.2015.06.008 ↗
6. G. Chao, D. Yongxiang, and M. Wubuliaisan, Microscale Simulation on Mechanical Properties of Al/PTFE Composite Based on Real Microstructures, Materials, 2016, 9(7), p 59010.3390/ma9070590 ↗
7. L. Durães, B.F.O. Costa, R. Santos et al., Fe2O3/Aluminum Thermite Reaction Intermediate and Final Products Characterization, Mater. Sci. Eng. A, 2007, 465(1), p 199-21010.1016/j.msea.2007.03.063 ↗
8. S.H. Fischer and M.C. Grubelich, Theoretical Energy Release of Thermites, Intermetallics, and Combustible Metals. Office of Scientific & Technical Information Technical Reports, 1998. https://doi.org/10.2172/65820810.2172/658208 ↗
9. B.E. Homan, K.L. McNesby, J. Ritter, J. Colburn, A. Brant, and R. Pandey, Investigations of the Energy Release Mechanisms of Aluminum-Nickel Reactive Material System, The U.S. Army Research Laboratory, Orlando, 2008
10. M. Anwaar Ellahi et al., in 14th International Bhurban Conference on Applied Sciences and Technology (IBCAST) IEEE. Synthesis, Characterization and Mechanical Properties of High-Density Reactive Materials (2017)
11. H. Zhao, X. Ning, C. Tan et al., Influence of Al12Mg17 Additive on Performance of Cold-Sprayed Ni–Al Reactive Material, J. Therm. Spray Technol., 2019, 28(3), p 1-14
12. J.D. Gibbins, A.K. Stover, N.M. Krywopusk, K. Woll, and T.P. Weihs, Properties of Reactive Al: Ni Compacts Fabricated by Radial Forging of Elemental and Alloy Powders, Combust. Flame, 2015, 162, p 4408-441610.1016/j.combustflame.2015.08.003 ↗
13. M.W. Beckstead, Recent Progress in Modeling Solid Propellant Combustion, Combust. Explos. Shock Waves, 2006, 42(6), p 623-64110.1007/s10573-006-0096-5 ↗
14. D. Stamatis and E. Dreizin, in 46th AIAA Aerospace Sciences Meeting and Exhibit. Fully Dense Al–CuO Nanocomposite Powders for Energetic Formulations (2008)10.2514/6.2008-1425 ↗
15. C.T. Wei, E. Vitali, F. Jiang et al., Quasi-static and Dynamic Response of Explosively Consolidated Metal-Aluminum Powder Mixtures, Acta Mater., 2012, 60(3), p 1418-143210.1016/j.actamat.2011.10.027 ↗
16. B.B. Aydelotte and N.N. Thadhani, Mechanistic Aspects of Impact-Initiated Reactions in Explosively Consolidated Metal + Aluminum Powder Mixtures, Mater. Sci. Eng. A, 2013, 570, p 164-17110.1016/j.msea.2013.01.054 ↗
17. A.K. Stover, N.M. Krywopusk, J.D. Gibbins et al., Mechanical Fabrication of Reactive Metal Laminate Powders, J. Mater. Sci., 2014, 49(17), p 5821-583010.1007/s10853-014-8187-2 ↗
18. A.K. Stover, N.M. Krywopusk, G.M. Fritz et al., An Analysis of the Microstructure and Properties of Cold-Rolled Ni:Al Laminate Foils, J. Mater. Sci., 2013, 48(17), p 5917-592910.1007/s10853-013-7387-5 ↗
19. E.M. Hunt and M.L. Pantoya, Impact Sensitivity of Intermetallic Nanocomposites: A Study on Compositional and Bulk Density, Intermetallics, 2010, 18(8), p 0-161610.1016/j.intermet.2010.04.015 ↗
20. A.S. Rogachev and S.G. Vadchenko, Structure Evolution and Reaction Mechanism in the Ni/Al Reactive Multilayer Nanofoils, Acta Mater., 2014, 66, p 86-9610.1016/j.actamat.2013.11.045 ↗
21. A. Bacciochini, M.I. Radulescu, Y. Charron-Tousignant et al., Enhanced Reactivity of Mechanically-Activated Nano-scale Gasless Reactive Materials Consolidated by Cold Spray, Surf. Coat. Technol., 2012, 206(21), p 4043-434810.1016/j.surfcoat.2012.02.024 ↗
22. A. Bacciochini, M.I. Radulescu, M. Yandouzi et al., Reactive Structural Materials Consolidated by Cold Spray: Al–CuO Thermite, Surf. Coat. Technol., 2013, 226, p 60-6710.1016/j.surfcoat.2013.03.036 ↗
23. S.W. Dean, J.K. Potter, R.A. Yetter et al., Energetic Intermetallic Materials Formed by Cold Spray, Intermetallics, 2013, 43, p 121-13010.1016/j.intermet.2013.07.019 ↗
24. R.N. Raoelison, Ch Verdy, and H. Liao, Cold Gas Dynamic Spray Additive Manufacturing Today: Deposit Possibilities, Technological Solutions and Viable Applications, Mater. Des., 2017, 133, p 266-28710.1016/j.matdes.2017.07.067 ↗
25. A. Biswas, S.K. Roy, K.R. Gurumurthy et al., A Study of Self-propagating High-Temperature Synthesis of NiAl in Thermal Explosion Mode, Acta Mater., 2002, 50(4), p 757-77310.1016/S1359-6454(01)00387-1 ↗
26. X. Qiu, J. Graeter, L. Kecskes et al., Exothermic Reactions in Cold-Rolled Ni/Al Reactive Multilayer Foils, J. Mater. Res., 2008, 23(02), p 367-37510.1557/JMR.2008.0043 ↗
27. L. Plazanet and F. Nardou, Reaction Process during Relative Sintering of NiAl, J. Mater. Sci., 1998, 33(8), p 2129-213610.1023/A:1004375304423 ↗
28. M.D. Grapes and T.P. Weihs, Exploring the Reaction Mechanism in Self-propagating Al/Ni Multilayers by Adding Inert Material, Combust. Flame, 2016, 172, p 10510.1016/j.combustflame.2016.07.006 ↗
29. Q. Fan, H. Chai, and Z. Jin, Dissolution-Precipitation-Substitution Mechanism of Self-propagating High-Temperature Synthesis of Beta-NiAl(Cu)/Alpha(Cu, Ni) Composite, Intermetallics, 2002, 10, p 541-55410.1016/S0966-9795(02)00032-8 ↗
30. E. Irissou, J.G. Legoux, B. Arsenault et al., Investigation of Al-Al2O3 Cold Spray Coating Formation and Properties, J. Therm. Spray Technol., 2007, 16(5-6), p 661-66810.1007/s11666-007-9086-8 ↗
31. F.J. Bremer, M. Beyss, E. Karthaus et al., Experimental Analysis of the Ni–Al Phase Diagram, J. Cryst. Growth, 1988, 87(2-3), p 185-19210.1016/0022-0248(88)90163-7 ↗
32. S. Scudino, G. Liu, K.G. Prashanth et al., Mechanical Properties of Al-Based Metal Matrix Composites Reinforced with Zr-Based Glassy Particles Produced by Powder Metallurgy, Acta Mater., 2009, 57(6), p 2029-203910.1016/j.actamat.2009.01.010 ↗
33. H. Zhao and C. Tan, Enhanced Reactivity of Ni–Al Reactive Material Formed by Cold Spraying Combined with Cold-Pack Rolling, J. Alloys Compd. Interdiscip. J. Mater. Sci. Solid-State Chem. Phys., 2018, 741, p 883-894
34. Q. Fan, H. Chai, and Z. Jin, Dissolution-Precipitation Mechanism of Self-propagating High-Temperature Synthesis of Mononickel Aluminide, Intermetallics, 2001, 9(7), p 0-61910.1016/S0966-9795(01)00046-2 ↗
35. S. Gheybi Hashemabad and T. Ando, Ignition Characteristics of Hybrid Al-Ni-Fe2O3 and Al-Ni-CuO Reactive Composites Fabricated by Ultrasonic Powder Consolidation, Combust. Flame, 2015, 162(4), p 1144-115210.1016/j.combustflame.2014.10.006 ↗
36. E.L. Dreizin, Phase Changes in Metal Combustion, Prog. Energy Combust. Sci., 2000, 26(1), p 57-7810.1016/S0360-1285(99)00010-6 ↗
37. M.T. Beason, I.E. Gunduz, and S.F. Son, The Role of Fracture in the Impact Initiation of Ni–Al Intermetallic Composite Reactives during Dynamic Loading, Acta Mater., 2017, 133, p 247-25710.1016/j.actamat.2017.05.042 ↗