journal article·2014-04Open access

Effects of Boron Carbide Content on the Microstructure and Properties of Atmospheric Plasma-Sprayed NiCoCrAlY/Al2O3-B4C Composite Coatings

Yuxia Cao, Chuanbing Huang, Wei Liu, Weigang Zhang, Lingzhong Du

Abstract

NiCoCrAlY/Al2O3 and NiCoCrAlY/B4C composite powders were prepared with hydrogen reduction and solid state alloying process. NiCoCrAlY/Al2O3-B4C composite coatings with different contents of B4C were prepared by atmospheric plasma spray technology. The microstructures, mechanical properties, and tribological properties of the composite coatings with different B4C contents were systematically investigated. The results show that the microhardness of the composite coatings increases, while the tensile strength of the composite coatings decreases, with the increase of B4C contents. The wear volume of the composite coatings decreases from room temperature to 800 °C with the increase of B4C contents. Abrasion wear is the main wear mechanism of the NiCoCrAlY/Al2O3-B4C composite coating from room temperature to 800 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Y.N. Wu, Q.M. Wang, P.L. Ke, C. Sun, J. Gong, F.H. Wang, and L.S. Wen, Evaluation of Arc Ion Plated NiCoCrAlYSiB Coatings After Oxidation at 900-1100 °C, Surf. Coat. Technol., 2006, 200, p 2857-286310.1016/j.surfcoat.2005.04.055 ↗
2. L.D. Zhao, M. Parco, and E. Lugscheider, Wear Behaviour of Al2O3 Dispersion Strengthened MCrAlY Coating, Surf. Coat. Technol., 2004, 184, p 298-30610.1016/j.surfcoat.2003.10.055 ↗
3. Z.M. Li, S.Q. Qian, and W. Wang, Characterization and Oxidation Behavior of NiCoCrAlY Coating Fabricated by Electrophoretic Deposition and Vacuum Heat Treatment, Appl. Surf. Sci., 2011, 257, p 4616-462010.1016/j.apsusc.2010.12.097 ↗
4. X. Jia and X.M. Ling, Influence of Al2O3 Reinforcement on the Abrasive Wear Characteristic of Al2O3/PA1010 Composite Coatings, Wear, 2005, 258, p 1342-134710.1016/j.wear.2004.10.003 ↗
5. L.M. Chang, M.Z. An, and S.Y. Shi, Microstructure and Characterization of Ni-Co/Al2O3 Composite Coatings by Pulse Reversal Electrodeposit, Mater. Chem. Phys., 2006, 100, p 395-39910.1016/j.matchemphys.2006.01.035 ↗
6. C.B. Huang, L.Z. Du, and W.G. Zhang, Effects of Solid Lubricant Content on the Microstructure and Properties of NiCr/Cr3C2-BaF2·CaF2 Composite Coatings, J. Alloys Compd., 2009, 479, p 777-78410.1016/j.jallcom.2009.01.062 ↗
7. L.Z. Du, C.B. Huang, W.G. Gang, J.M. Zhang, and W. Liu, Effect of NiCr Clad BaF2·CaF2 Addition on Wear Performance of Plasma Sprayed Chromium Carbide-Nichrome Coating, J. Therm. Spray Technol., 2010, 19(3), p 551-55710.1007/s11666-009-9462-7 ↗
8. L.Z. Du, W.G. Gang, W. Liu, and J.M. Zhang, Preparation and Characterization of Plasma Sprayed Ni3Al-hBN Composite Coating, Surf. Coat. Technol., 2010, 205, p 2419-242410.1016/j.surfcoat.2010.09.036 ↗
9. S. Yoon, J. Kim, B.D. Kim, and C. Lee, Tribological Behavior of B4C Reinforced Fe-Base Bulk Metallic Glass Composite Coating, Surf. Coat. Technol., 2010, 205, p 1962-196810.1016/j.surfcoat.2010.08.078 ↗
10. K.M. Shorowordi, T. Laoui, A.S.M.A. Haseeb, J.P. Celis, and L. Froyen, Microstructure and Interface Characteristics of B4C, SiC and Al2O3 Reinforced Al Matrix Composites: A Comparative Study, J. Mater. Process. Technol., 2003, 142, p 738-74310.1016/S0924-0136(03)00815-X ↗
11. M. Yandouzi, A.J. Böttger, R.W.A. Hendrikx, M. Brochu, P. Richer, A. Charest, and B. Jodoin, Microstructure and Mechanical Properties of B4C Reinforced Al-Based Matrix Composite Coatings Deposited by CGDS and PGDS Processes, Surf. Coat. Technol., 2010, 205, p 2234-224610.1016/j.surfcoat.2010.08.143 ↗
12. T.Y. Cho, J.H. Yoon, K.S. Kim, K.O. Song, Y.K. Joo, W. Fang, S.H. Zhang, S.J. Youn, H.G. Chun, and S.Y. Hwang, A Study on HVOF Coatings of Micron and Nano WC-Co Powders, Surf. Coat. Technol., 2008, 202, p 5556-555910.1016/j.surfcoat.2008.06.106 ↗
13. Q. Yang, T. Senda, and A. Hirose, Sliding Wear Behavior of WC-12% Co Coatings at Elevated Temperatures, Surf. Coat. Technol., 2006, 200, p 4208-421210.1016/j.surfcoat.2004.12.032 ↗
14. G. Kim, H. Choi, C. Han, S. Uhm, and C. Lee, Characterization of Atmospheric Plasma Spray NiCr-Cr2O3-Ag-CaF2/BaF2 Coatings, Surf. Coat. Technol., 2005, 195, p 107-11510.1016/j.surfcoat.2004.11.041 ↗
15. C.L. Li, H.X. Zhao, T. Takahashi, and M. Matsumura, Improvement of Corrosion Resistance of Materials Coated with a Cr2O3/NiCr Dilayer Using a Sealing Treatment, Mater. Sci. Eng., 2001, A308, p 268-276
16. M. Ebrahimian-Hoaaeinabadi, K. Azari-Dorcheh, and S.M. Moomir Vaghefi, Wear Behavior of Electroless Ni-P-B4C Composite Coatings, Wear, 2006, 260, p 123-12710.1016/j.wear.2005.01.020 ↗
17. O. Sarikaya, S. Anik, S. Aslanlar, S.C. Okumus, and E. Celik, Al-Si/B4C Composite Coatings on Al-Si Substrate by Plasma Spray Technique, Mater. Des., 2007, 28, p 2443-244910.1016/j.matdes.2006.09.007 ↗
18. S.M. Monir Vaghefi, A. Saatchi, and M. Ebrahimian-Hoseinabadi, Deposition and Properties of Electroless Ni-P-B4C Composite Coatings, Surf. Coat. Technol., 2003, 168, p 259-26210.1016/S0257-8972(02)00926-X ↗