journal article·2026-04Open access

Mechanical and Fracture Properties of As-Built Inconel 718 Produced by High-Speed Laser Directed Energy Deposition: Stability to Process Parameters Variation

Ondrej Kovarik, Simone Maffia, Tobias Stittgen, Filip Wick, Vojtech Lukes, Abhinav Anand, Jan Cizek

Abstract

Abstract Directed energy deposition (DED) is a group of efficient additive manufacturing methods for creating complex-shaped components. Of these, the next-generation high-speed laser-based directed energy deposition (HS DED-LB) combines high-speed kinematics and a high-power infrared laser, offering unparalleled deposition speeds. Due to its novelty, the mechanical and fracture properties of the HS DED-LB deposits are virtually unknown. In this pioneer study, a series of unique testing methods was used to determine the properties and assess the influence of the inherent microstructure. As a model material, Inconel 718 was selected as an industrially relevant superalloy. To demonstrate the HS DED-LB capabilities, it was printed at a high powder feed rate of 30 g/min at different levels of laser power (up to 2400 W) and scanning speeds (up to 60 m/min). The corresponding linear energy densities ranged from 1.8 to 3.6 kJ/m, i.e., values significantly higher than those of powder bed fusion methods and lower than those of conventional DED. The method was shown to be very robust as, in this range, the tested mechanical and fracture properties differed by less than 10%. The HS DED-LB Inconel 718 exhibited a specific microstructure and texture, owing to the inherent thermal history of the melt pool. This is a favorable material state, similar to that of the traditional directionally solidified Inconel superalloys used in aerospace.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. M. Perrut, P. Caron, M. Thomas, and A. Couret, High Temperature Materials for Aerospace Applications: Ni-Based Superalloys and γ-TiAl Alloys, C. R. Phys., 2018, 19(8), p 657–671.10.1016/j.crhy.2018.10.002 ↗
2. R. Ortiz-Fernandez, and B. Jodoin, Toward Efficient Cold Spraying of Inconel 718: Understanding the Influence of Coating and Particle Impact Temperatures, J. Therm. Spray Technol., 2022, 32(1), p 188–207.10.1007/s11666-022-01490-1 ↗
3. M. Balbaa, S. Mekhiel, M. Elbestawi, and J. McIsaac, On Selective Laser Melting of Inconel 718: Densification, Surface Roughness, and Residual Stresses, Mater. Des., 2020, 193, p 108818.10.1016/j.matdes.2020.108818 ↗
4. F. Brenne, A. Taube, M. Pröbstle, S. Neumeier, D. Schwarze, M. Schaper, and T. Niendorf, Microstructural Design of Ni-Base Alloys for High-Temperature Applications: Impact of Heat Treatment on Microstructure and Mechanical Properties After Selective Laser Melting, Prog. Addit. Manuf., 2016, 1(3–4), p 141–151.10.1007/s40964-016-0013-8 ↗
5. M. Valdez, C. Kozuch, E.J. Faierson, and I. Jasiuk, Induced Porosity in Super Alloy 718 Through the Laser Additive Manufacturing Process: Microstructure and Mechanical Properties, J. Alloys Compd., 2017, 725, p 757–764.10.1016/j.jallcom.2017.07.198 ↗
6. M. Bambach, I. Sizova, F. Kies, and C. Haase, Directed Energy Deposition of Inconel 718 Powder, Cold and Hot Wire Using a Six-Beam Direct Diode Laser Set-Up, Addit. Manuf., 2021, 47, p 102269.
7. M. Bambach, I. Sizova, F. Silze, and M. Schnick, Comparison of Laser Metal Deposition of Inconel 718 from Powder, Hot and Cold Wire, Procedia CIRP, 2018, 74, p 206–209.10.1016/j.procir.2018.08.095 ↗
8. A.S. Johnson, S. Shao, N. Shamsaei, S.M. Thompson, and L. Bian, Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser-Deposited Inconel 718, JOM, 2016, 69(3), p 597–603.10.1007/s11837-016-2225-2 ↗
9. S. Sreekanth, E. Ghassemali, K. Hurtig, S. Joshi, and J. Andersson, Effect of Direct Energy Deposition Process Parameters on Single-Track Deposits of Alloy 718, Metals, 2020, 10(1), p 96.10.3390/met10010096 ↗
10. L.L. Parimi, G.A. Ravi, D. Clark, and M.M. Attallah, Microstructural and Texture Development in Direct Laser Fabricated in 718, Mater Charact, 2014, 89, p 102–111.10.1016/j.matchar.2013.12.012 ↗
11. Q.-l. Zhang, J.-H. Yao, and J. Mazumder, Laser Direct Metal Deposition Technology and Microstructure and Composition Segregation of Inconel 718 Superalloy, J. Iron. Steel Res. Int., 2011, 18(4), p 73–78.10.1016/S1006-706X(11)60054-X ↗
12. T.R.F. Cavalcante, F.E. Mariani, and J.A.A. Diaz, Additive Manufacturing of Inconel 718: A Review on Microstructures and Mechanical Prop-erties of Ded-lb-Processed Samples, J. Mater. Res., 2025 https://doi.org/10.1557/s43578-025-01663-y10.1557/s43578-025-01663-y ↗
13. C. Kumara, D. Deng, J. Moverare, and P. Nylén, Modelling of Anisotropic Elastic Properties in Alloy 718 Built by Electron Beam Melting, Mater. Sci. Technol., 2018, 34(5), p 529–537.10.1080/02670836.2018.1426258 ↗
14. M. Shahwaz, P. Nath, and I. Sen, A Critical Review on the Microstructure and Mechanical Properties Correlation of Additively Manufactured Nickel-Based Superalloys, J. Alloy. Compd., 2022, 907, p 164530.10.1016/j.jallcom.2022.164530 ↗
15. Y. Zhao, Q. Guo, D. Zunfeng, S. Chen, J. Tan, Z. Yang, and Z. Ma, Critical Role of Subgrain Orientation on the Stability of Mechanical Properties of Selective Laser Melting Manufactured Alloys, Mater. Sci. Eng. A, 2022, 832, p 142505.10.1016/j.msea.2021.142505 ↗
16. M.J. Donachie and S.J. Donachie, Superalloys: A Technical Guide, ASM International, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
17. Y. Xiaobin, X. Lin, F. Liu, L. Wang, Y. Tang, J. Li, S. Zhang, and W. Huang, Influence of Post-Heat-Treatment on the Microstructure and Fracture Toughness Properties of Inconel 718 Fabricated with Laser Directed Energy Deposition Additive Manufacturing, Mater. Sci. Eng. A, 2020, 798, p 140092.10.1016/j.msea.2020.140092 ↗
18. S. Heo, Y. Lim, N. Kwak, C. Jeon, M. Choi, and I. Jo, Impact of Heat Treatment and Building Direction on Tensile Properties and Fracture Mechanism of Inconel 718 Produced by Slm Process, Metals, 2024, 14(4), p 440.10.3390/met14040440 ↗
19. X.G. Yang, B. Li, M.L. Wang, S.Q. Guo, G.L. Miao, D.Q. Shi, and Y.S. Fan, Correlation Between Microstructures and Mechanical Properties of a Slm Ni-Based Superalloy After Different Post Processes, J. Market. Res., 2024, 32, p 955–966.
20. X. Zhang, M. Ya-hang, L. Ma, J.-J. Liang, Y.-Z. Zhou, X.-F. Sun, and J.-G. Li, Cracking on a Nickel-Based Superalloy Fabricated by Direct Energy Deposition, China Foundry, 2024, 21(4), p 311–318.10.1007/s41230-024-3111-0 ↗
21. A. Ramakrishnan and G.P. Dinda, Direct Laser Metal Deposition of Inconel 738, Mater. Sci. Eng. A, 2019, 740–741, p 1–13.10.1016/j.msea.2018.10.020 ↗
22. J. Schaible, L. Sayk, T. Schopphoven, J.H. Schleifenbaum, and C. Häfner, Development of a High-Speed Laser Material Deposition Process for Additive Manufacturing, J. Laser Appl., 2020 https://doi.org/10.2351/7.000032010.2351/7.0000320 ↗
23. S. Maffia, O. Kovarik, J. Cech, and T. Stittgen, Investigating the application of 3d-ehla for microstructure control in large-scale additive manufacturing. In Euro PM2024 Proceedings, 202410.59499/EP246283184 ↗
24. ASTM E399-09, Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIC of metallic materials. West Conshohocken, PA, 2009
25. J. Čížek, O. Kovářík, J. Cupera, J. Kondas, T. Bajer, F. Siska, M. Janovska, and H. Seiner, Measurement of Mechanical and Fatigue Properties Using Unified, Simple-Geometry Specimens: Cold Spray Additively Manufactured Pure Metals, Surf. Coat. Technol., 2021 https://doi.org/10.1016/j.surfcoat.2021.12692910.1016/j.surfcoat.2021.126929 ↗
26. J. Blaber, B. Adair, and A. Antoniou, Ncorr: Open-Source 2D Digital Image Correlation Matlab Software, Exp. Mech., 2015, 55(6), p 1105–1122.10.1007/s11340-015-0009-1 ↗
27. H. Herbert, Ueber den Zusammenhang der Biegungselastizität des Gußeisens mit seiner Zug- und Druckelastizität. Forschungsarbeiten auf dem Gebiete des Ingenieurwesens, p. 39–81, (1910)10.1007/978-3-662-02218-4_2 ↗
28. O. Kovářík, A. Janca, and J. Siegl, Fatigue Crack Growth Rate in Miniature Specimens Using Resonance, Int. J. Fatigue, 2017, 102, p 252–260. (cited By 9)10.1016/j.ijfatigue.2017.02.015 ↗
29. O. Kovářík, A. Materna, J. Siegl, J. Čížek, and J. Klecka, Fatigue Crack Growth in Plasma-Sprayed Refractory Materials, J. Therm. Spray Technol., 2019, 28(1–2), p 87–97.10.1007/s11666-018-0790-3 ↗
30. ASTM E647-15e1, Standard Test Method for Measurement of Fatigue Crack Growth Rates. (ASTM International, West Conshohocken, PA, 2015)
31. E1820-18ae12019, Standard Test Method for Measurement of Fracture Toughness. (ASTM International, West Conshohocken, PA, 2019)
32. R. Jiang, Z. Ren, J. Aroh, A. Mostafaei, B. Gould, T. Sun, and A.D. Rollett, Quantifying Equiaxed vs Epitaxial Solidification in Laser Melting of Cmsx-4 Single Crystal Superalloy, Metall. and Mater. Trans. A., 2022, 54(3), p 808–822.10.1007/s11661-022-06929-2 ↗
33. G.P. Dinda, A.K. Dasgupta, and J. Mazumder, Texture Control During Laser Deposition of Nickel-Based Superalloy, Scripta Mater., 2012, 67(5), p 503–506.10.1016/j.scriptamat.2012.06.014 ↗
34. S. Shi, Y. Zhao, X. Lin, H. Deng, L. Zhao, G. He, and W.-D. Huang, Significance of α-Al Cellular Matrix in Tensile Behavior and Work-Hardening of Additive Manufactured AlSi10Mg Alloy, Virtual Phys. Prototyp., 2025 https://doi.org/10.1080/17452759.2024.244918910.1080/17452759.2024.2449189 ↗
35. H. Yang, Z. Wang, H. Wang, Y. Wu, and H. Wang, Microstructure, Mechanical Property and Heat Treatment Schedule of the Inconel 718 Manufactured by Low and High Power Laser Powder Bed Fusion, Mater. Sci. Eng. A, 2023, 863, p 144517.10.1016/j.msea.2022.144517 ↗
36. G. Meng, Y. Gong, J. Zhang, Z. Jiang, Q. Ren, and J. Zhao, Microstructure and Mechanical Properties of Inconel 718 Thin Walls Prepared by Laser Direct Energy Deposition and Selective Laser Melting, Thin-Walled Struct., 2023, 193, p 111284.10.1016/j.tws.2023.111284 ↗
37. Ü.G. Başcı, E. Avcu, M. Kıraç, A. Sever, İ Gökalp, H.-M. Yavuz, S. Oktay, E. Abakay, Y.Y. Avcu, and R. Yamanoğlu, Microstructural, Mechanical, and Tribological Properties of Selective Laser Melted Inconel 718 Alloy: The Influences of Heat Treatment, Crystals, 2024, 15(1), p 18.10.3390/cryst15010018 ↗
38. D. Zhang, W. Niu, X. Cao, and Z. Liu, Effect of Standard Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser Melting Manufactured Inconel 718 Superalloy, Mater. Sci. Eng. A, 2015, 644, p 32–40.10.1016/j.msea.2015.06.021 ↗
39. X. Yu, X. Lin, H. Tan, Y. Hu, S. Zhang, F. Liu, H. Yang, and W. Huang, Microstructure and Fatigue Crack Growth Behavior of Inconel 718 Super-Alloy Manufactured by Laser Directed Energy Deposition, Int. J. Fatigue, 2021, 143, p 106005.10.1016/j.ijfatigue.2020.106005 ↗
40. I. Miguel, G. Artola, J.I. Arrizubieta, A.I. Fernández-Calvo, and C. Angulo, Inconel 718 Hybrid Laser-Based Directed Energy Deposition and Wrought Component Characterization Through Small Punch Tests, Appl. Sci., 2024, 14(15), p 6420.10.3390/app14156420 ↗
41. R. Konečná, L. Kunz, G. Nicoletto, and A. Bača, Long Fatigue Crack Growth in Inconel 718 Produced by Selective Laser Melting, Int. J. Fatigue, 2016, 92, p 499–506.10.1016/j.ijfatigue.2016.03.012 ↗
42. I. Černý, J. Kec, A. Poloch, and M. Zetek, Mechanical properties and high-cycle fatigue strength of 3d printed inconel 718 alloy and effects of high-temperature ex-posure to corrosive atmosphere. In FRACTURE AND DAMAGE MECHANICS: Theory, Simulation and Experiment, 2309, p. 020026. AIP Publishing, 202010.1063/5.0035400 ↗
43. X Yu, X Lin, F Liu, Y Hu, S Zhang, Y Zhan, H Yang, and W Huang, Microstructure and Fatigue Crack Growth Behavior OF Inconel 718 Superalloy Fabricated via Laser Directed Energy Deposition Additive Manufacturing. SSRN Electr. J., (2020)10.2139/ssrn.3614841 ↗
44. M. Rashkovets, N. Kislov, M. Gushchina, A. Nikulina, A. Popelukh, and O. Klimova-Korsmik, Phase Composition and Fatigue Crack Growth Behavior of Inconel 718 Under Additive Manufacturing, Mater. Sci. Eng. A, 2022, 851, p 143595.10.1016/j.msea.2022.143595 ↗
45. R. Ghiaasiaan, A. Poudel, N. Ahmad, P.R. Gradl, S. Shao, and N. Shamsaei, High Temperature Tensile and Fatigue Behaviors of Additively Manufactured In625 and In718, Procedia Struct. Integr., 2022, 38, p 581–587.10.1016/j.prostr.2022.03.059 ↗
46. P.D. Nezhadfar, A.S. Johnson, and N. Shamsaei, Fatigue Behavior and Microstructural Evolution of Additively Manufactured Inconel 718 Under Cyclic Loading at Elevated Temperature, Int. J. Fatigue, 2020, 136, p 105598.10.1016/j.ijfatigue.2020.105598 ↗
47. M. Seifi, A. A. Salem, D. P. Satko, R. Grylls, and J. J. Lewandowski. Effects of Post-processing on Microstructure and Mechanical Properties of SLM-Processed IN-718, p. 515–526. Springer International Publishing, 201810.1007/978-3-319-89480-5_33 ↗
48. K.-H. Schwalbe, S. Kalluri, R.M. McGaw, A. Neimitz, and S.W. Dean, On the Beauty of Analytical Models for Fatigue Crack Propagation and Fracture—A Personal Historical Review, J. ASTM Int., 2010, 7(8), p 102713.10.1520/JAI102713 ↗
49. L.A. James, Fatigue Crack Propagation in Alloy 718: A Review. Superalloys, p. 499–515 (1989)10.7449/1989/Superalloys_1989_499_515 ↗