Effect of Laser Remelting on the Microstructure and Properties of Fe-Based Amorphous Coatings
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. H. Jiang, J.Z. Hu, F.Y. Luo, Y. Zhao, and W.Q. Shi, Fe-Based Amorphous Reinforced CoCrFeNi HEA Composite Coating Prepared by Laser Cladding, J. Mater. Res. Technol., 2024, 31, p 1912-1923.10.1016/j.jmrt.2024.06.226 ↗
2. S. Cui, H.M. Zhai, W. Tong, W.S. Li, X.Q. Li, X.J. Fan, and D.S. Xiong, Corrosion and Tribo-Corrosion Behaviors of Detonation Sprayed Fe-Based Amorphous Coating, Surf. Coat. Technol., 2024, 482, 130717.10.1016/j.surfcoat.2024.130717 ↗
3. M.M. Quazi, M.A. Fazal, A.S.M.A. Haseeb, F. Yusof, H.H. Masjuki, and A. Arslan, Effect of Rare Earth Elements and their Oxides on Tribo-Mechanical Performance of Laser Claddings: A Review, J. Rare Earths, 2016, 34, p 549-564.10.1016/S1002-0721(16)60061-3 ↗
4. P.L. Zhang, H. Yan, C.W. Yao, Z.G. Li, Z.S. Yu, and P.Q. Xu, Synthesis of Fe-Ni-B-Si-Nb Amorphous and Crystalline Composite Coatings by Laser Cladding and Remelting, Surf. Coat. Technol., 2011, 206(6), p 1229-1236.10.1016/j.surfcoat.2011.08.039 ↗
5. Q.J. Zhu, S.Y. Qu, X.H. Wang, and Z.D. Zou, Synthesis of Fe-Based Amorphous Composite Coatings with Low Purity Materials by Laser Cladding, Appl. Surf. Sci., 2007, 253(17), p 7060-7064.10.1016/j.apsusc.2007.02.055 ↗
6. C.Y. Li, J.S. Zhai, L. Tian, Y. Lu, X.C. Li, and S.Z. Kou, Fabrication of Fe-Based Amorphous Composite Coating by Laser Cladding, J. Non-Cryst. Solids, 2022, 589, 121648.10.1016/j.jnoncrysol.2022.121648 ↗
7. A. Basu, A.N. Samant, S.P. Harimkar, J.D. Majumdar, I. Manna, and N.B. Dahotre, Laser Surface Coating of Fe-Cr-Mo-Y-B-C Bulk Metallic Glass Composition on AISI 4140 Steel, Surf. Coat. Technol., 2008, 202(12), p 2623-2631.10.1016/j.surfcoat.2007.09.028 ↗
8. N.W. Dai, L.C. Zhang, J.X. Zhang, X. Zhang, Q.Z. Ni, Y. Chen, M.L. Wu, and C. Yang, Distinction in Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy on Different Planes, Corros. Sci., 2016, 111, p 703-710.10.1016/j.corsci.2016.06.009 ↗
9. D.D. Coimbrão, G. Zepon, G.Y. Koga, D.A. Godoy Pérez, F.H.P. Almeida, V. Roche, J.C. Lepretre, A.M. Jorge, C.S. Kiminami, C. Bolfarini, A. Inoue, and W.J. Botta, Corrosion Properties of Amorphous, Partially, and Fully Crystallized Fe68Cr8Mo4Nb4B16 Alloy, J. Alloy. Compd., 2020, 826, 154123.10.1016/j.jallcom.2020.154123 ↗
10. Z.B. Zheng, Y.G. Zheng, W.H. Sun, and J.Q. Wang, Effect of Heat Treatment on the Structure, Cavitation Erosion and Erosion-Corrosion Behavior of Fe-Based Amorphous Coatings, Tribol. Int., 2015, 90, p 393-403.10.1016/j.triboint.2015.04.039 ↗
11. H.Z. Wang, Y.H. Cheng, J.Y. Yang, and Q.Q. Wang, Influence of Laser Remelting on Organization, Mechanical Properties and Corrosion Resistance of Fe-based Amorphous Composite Coating, Surf. Coat. Technol., 2021, 414, 127081.10.1016/j.surfcoat.2021.127081 ↗
12. J. Jiao, Q. Luo, X.S. Wei, Y. Wang, and J. Shen, Influence of Sealing Treatment on the Corrosion Resistance of Fe-Based Amorphous Coatings in HCl Solution, J. Alloys Compd., 2017, 714, p 356-362.10.1016/j.jallcom.2017.04.179 ↗
13. C.Y. Li, Y.S. Zhang, J.S. Zhai, C.L. Li, and S.Z. Kou, Effects of Heat Treatment on Microstructure and properties of Fe-Based Amorphous Composite Coatings, Mater. Sci. Technol., 2023, 39(15), p 2168–2178.10.1080/02670836.2023.2195750 ↗
14. Q.Y. Wang, Y.C. Xi, Y.H. Zhao, S. Liu, S.L. Bai, and Z.D. Liu, Effects of Laser Re-Melting and Annealing on Microstructure, Mechanical Property and Corrosion Resistance of Fe-Based Amorphous/Crystalline Composite Coating, Mater Charact., 2017, 127, p 239–247.10.1016/j.matchar.2017.03.011 ↗
15. Y. Zhou, L.F. Xu, H.Z. Zheng, and D.S. Wang, Influences of Laser Remelting on Microstructure of Nanostructured Al2O3-13 wt.% TiO2 Coatings Fabricated by Plasma Spraying, Appl. Surf. Sci., 2009, 255(8), p 4606-4610.10.1016/j.apsusc.2008.11.082 ↗
16. S.F. Zhou, Y.B. Xu, B.Q. Liao, Y.J. Sun, X.Q. Dai, J.X. Yang, and Z.Y. Li, Effect of Laser Remelting on Microstructure and Properties of WC Reinforced Fe-Based Amorphous Composite Coatings by Laser Cladding, Opt. Laser Technol., 2018, 103, p 8-16.10.1016/j.optlastec.2018.01.024 ↗
17. C. Jiang, J.X. Wang, J.J. Han, Y. Lu, Y.Z. Xing, Y.N. Chen, and X.D. Song, Effect of Laser Remelting on the Microstructure and Corrosion Resistance of Plasma Sprayed Fe-Based Coating, J. Wuhan Univ. Technol. Mater. Sci. Ed., 2015, 30(4), p 804–807.10.1007/s11595-015-1231-5 ↗
18. R.F. Li, Y.J. Jin, Z.G. Li, Y.Y. Zhu, and M.F. Wu, Effect of the Remelting Scanning Speed on the Amorphous Forming Ability of Ni-Based Alloy Using Laser Cladding Plus a Laser Remelting Process, Surf. Coat. Technol., 2014, 259, p 725-731.10.1016/j.surfcoat.2014.09.067 ↗
19. C.Y. Li, Y.S. Zhang, J.S. Zhai, C.L. Li, and S.Z. Kou, Effects of Heat Treatment on Microstructure and Properties of Fe-Based Amorphous Composite Coatings, Mater. Sci. Technol., 2023, 39, p 2168-2178.10.1080/02670836.2023.2195750 ↗
20. C.Y. Li, G,N Quan, Q. Zhang, X.H. Wang, X.C. Li, S.Z. Kou, A Novel Amorphous Alloy Coating for Elevating Corrosion Resistance of X70 Pipeline Steel, J. Therm. Spray Tech., 2024, 33, p 1612–1629.10.1007/s11666-024-01778-4 ↗
21. R.Z. Noorbakhsh, F.H. Ostovan, and M.S. Toozandehjani, Fe-Based Amorphous Alloy Coatings: A Review, Adv. Eng. Mater., 2024, 26, p 2302184.10.1002/adem.202302184 ↗
22. Y.Z. Lu, G.K. Huang, Y.Z. Wang, H.G. Li, Z.X. Qin, and X. Lu, Crack-Free Fe-Based Amorphous Coating Synthesized by Laser Cladding, Mater. Lett., 2018, 210, p 46-50.10.1016/j.matlet.2017.08.125 ↗
23. K.Y. Luo, X. Xu, Z. Zhao, S.S. Zhao, Z.G. Cheng, and J.Z. Lu, Microstructural Evolution and Characteristics of Bonding Zone in Multilayer Laser Cladding of Fe-Based Coating, J. Mater. Process. Technol., 2019, 263, p 50-58.10.1016/j.jmatprotec.2018.08.005 ↗
24. R.F. Li, Q.C. Zheng, Y.Y. Zhu, Z.G. Li, K. Feng, and C. Liu, Experimental Study of the Microstructure and Micromechanical Properties of Laser Cladded Ni-Based Amorphous Composite Coatings, J. Mater. Eng. Perform., 2018, 27, p 80-88.10.1007/s11665-017-3066-z ↗
25. K.Y. Li, J. Liang, and J.S. Zhou, Preparation and Characterization of Laser Cladded FeCrMoBSi aMorphous Composite Coatings, RSC Adv., 2021, 423, 127520.
26. Y.L. Li, Y. Li, W.Q. W, M. Lei, X.W. Li, Synthesis Fe-Ni protective coating on 45 steel by laser remelting nickel pre-coating dopped with Fe-based amorphous powders, Mater. Charact., 2021, 176, p 111129.10.1016/j.matchar.2021.111129 ↗
27. H. Du, W. Xin, B. Wang, J. Feng, X.C. Xia, Y.J. Wang, and S.C. Wei, Variation in Nanocrystalline Phase Content on Mechanical Properties and Wear Resistance of FeCrMoWBRE Amorphous/Nanocrystalline Coating Deposited by High-Velocity Arc Spraying, Nanomaterials., 2025, 15(4), 305.10.3390/nano15040305 ↗
28. Y.P. Wu, P.H. Lin, G.Z. Xie, J.H. Hu, and M. Cao, Formation of Amorphous and Nanocrystalline Phases in High Velocity Oxy-Fuel Thermally Sprayed a Fe-Cr-Si-B-Mn Alloy, Mater. Sci. Eng. A., 2006, 430, p 34–39.10.1016/j.msea.2006.05.095 ↗
29. A. Kumar, S.K. Nayak, P. Bijalwan, M. Dutta, A. Banerjee, and T. Laha, Optimization of Mechanical and Corrosion Properties of Plasma Sprayed Low-Chromium Containing Fe-Based Amorphous/Nanocrystalline Composite Coating, Surf. Coat. Technol., 2019, 370, p 255-268.10.1016/j.surfcoat.2019.05.010 ↗
30. F.Y. Shu, S. Liu, H.Y. Zhao, W.X. He, S.H. Sui, J. Zhang, P. He, and B.S. Xu, Structure and High-Temperature Property of Amorphous Composite Coating Synthesized by Laser Cladding FeCrCoNiSiB High-Entropy Alloy Powder, J. Alloys Compd., 2018, 731, p 662-666.10.1016/j.jallcom.2017.08.248 ↗
31. K. Qi, Y. Yang, G.F. Hu, X. Lu, and J.D. Li, Thermal Expansion Control of Composite Coatings on 42CrMo by Laser Cladding, Surf. Coat. Technol., 2020, 397, 125983.10.1016/j.surfcoat.2020.125983 ↗
32. X.C. Shang, C.Z. Zhang, T. Xv, C.M. Wang, and K.L. Lu, Synergistic Effect of Carbide and Amorphous Phase on Mechanical Property and Corrosion Resistance of Laser-Clad Fe-Based Amorphous Coatings, Mater. Chem. Phys., 2021, 263, 124407.10.1016/j.matchemphys.2021.124407 ↗
33. W.H. Wang, The Elastic Properties, Elastic Models and Elastic Perspectives of Metallic Glasses, Prog. Mater. Sci., 2012, 57, p 487-656.10.1016/j.pmatsci.2011.07.001 ↗
34. J.B. Cheng, X.B. Liang, Z.H. Wang, and B.S. Xu, Dry Sliding Friction and Wear Properties of Metallic Glass Coating and Martensite Stainless Coating, Tribol. Int., 2013, 60, p 140-146.10.1016/j.triboint.2012.11.010 ↗
35. Y.H. Kang, Y.M. Chen, Y.X. Wen, B. Wu, and M.B. Song, Effects of Crystallization on the Corrosion Resistance of Fe-Based Amorphous Coatings, Corros. Sci., 2012, 59, p 10-19.10.1016/j.corsci.2012.02.003 ↗
36. R.Q. Guo, C. Zhang, Y. Yang, Y. Peng, and L. Liu, Corrosion and Wear Resistance of a Fe-Based Amorphous Coating in Underground Environment, Intermetallics., 2012, 30, p 94–99.10.1016/j.intermet.2012.03.026 ↗
37. Y.J. Yang, X.D. Fan, F.L. Wang, H.N. Qi, Y. Yue, M.Z. Ma, X.Y. Zhang, G. Li, and R.P. Liu, Effect of Nb Content on Corrosion Behavior of Ti-Based Bulk Metallic Glass Composites in Different Solutions, Appl. Surf. Sci., 2019, 471, p 108-117.10.1016/j.apsusc.2018.11.190 ↗
38. L. Ren, Y.H. Cheng, S.Z. Feng, and Z.T. Han, Experimental Study on Corrosion-Fouling Relationship of Ni-W-P Composite Coating Surface of Heat Exchanger, Surf. Topogr. Metrol. Prop., 2019, 7(1), p 15011.10.1088/2051-672X/ab0320 ↗
39. C. Zhang, K.C. Chan, Y. Wu, and L. Liu, Pitting Initiation in Fe-Based Amorphous Coatings, Acta Mater., 2012, 60(10), p 4152-4159.10.1016/j.actamat.2012.04.005 ↗
40. S.D. Zhang, J. Wu, W.B. Qi, and J.Q. Wang, Effect of Porosity Defects on the Long-Term Corrosion Behaviour of Fe-Based Amorphous Alloy Coated Mild Steel, Corros. Sci., 2016, 110, p 57-70.10.1016/j.corsci.2016.04.021 ↗
41. S. Sarangi, A.K. Mishra, and S. Sahoo, Wear Prognosis in Rolling Friction of AISI SS304 Steel Through Worn Out Particle Analysis, Mater. Today Proc., 2023, 74, p 858-862.10.1016/j.matpr.2022.11.225 ↗
42. S. Sarangia, A.K. Mishraa, and S. Sahoo, An Experimental Investigation on Metallurgical and Corrosion Behavior of Atmospheric Plasma Sprayed Stellite 6 Powder on AISI 304 Stainless Steel, Curr. Chem. Lett., 2023, 12, p 459-470.10.5267/j.ccl.2022.10.003 ↗
43. Y. W. M. Li, Effect of the Remelting Scanning Speed on the Amorphous Forming Ability of Ni-Based Alloy Using Laser cladding Plus a Laser Remelting Process. Surf. Coat. Technol., 2014, 259(Pta3).10.1016/j.surfcoat.2014.09.067 ↗
44. Y.J. Sun, W.C. Wang, H.X. Li, L. Xie, Y.B. Li, S.L. Wang, W.R. Wang, J.M. Zhang, and J.S. Zhang, High-Performance HVOF-Sprayed Fe-Based Amorphous Coating on LA141 Magnesium Alloy Via Optimizing Oxygen Flow and Kerosene fLow, Materials., 2021, 14, p 4786.10.3390/ma14174786 ↗
45. W.P. Wu and S. Lin, Wear and Corrosion Resistances of arc-Sprayed FeCr Alloy and Fe-Based Coatings for Boiler Heat Exchanger Pipelines, J. Therm. Spray Tech., 2024, 33, p 2068-2088.10.1007/s11666-024-01828-x ↗
46. A. Kumar, S.K. Nayak, P. Bijalwan, M. Dutta, A. Banerjee, T. Laha, Optimization of Mechanical and Corrosion Properties of Plasma Sprayed Low chromi um Containing Fe-Based Amorphous/Nanocrystalline Composite Coating, Surf. Coat. Technol., 2019, 370, p 255–268.10.1016/j.surfcoat.2019.05.010 ↗
47. S.Y. Chen, L.L. Ni, Y.C. Zhang, Y. Wang, T. Cui, J. Liang, J.L. Chen, and M. Wang, Laser Cladding of a Novel Fe-Based Coating with High Wear Resistance, Corrosion Resistance and Self-Lubricating Properties, Surf. Coat. Technol., 2024, 478, 130468.10.1016/j.surfcoat.2024.130468 ↗