journal article·2008-12

Effect of Process Conditions on Microstructure and Corrosion Resistance of Cold-Sprayed Ti Coatings

Hong-Ren Wang, Bao-Rong Hou, Jun Wang, Qi Wang, Wen-Ya Li

Journal of Thermal Spray Technology· Volume 17· Issue 5-6
Publisher page

Abstract

Ti and Ti alloys can be applied to steels as a protective coating in view of its excellent resistance to corrosive environment. Cold spraying, as a new coating technique, has potential advantages in fabrication of Ti coating in comparison with conventional thermal spraying techniques. In this study, Ti coatings were prepared on carbon steel substrates by cold spraying via controlling the process conditions. The microstructure of coatings was observed by SEM. The porosity of coatings was estimated by image analysis and the bond strength was tested for comparison of the process conditions. Potentiodynamic polarization and open-circuit potential (OCP) measurements were performed to understand the corrosion behavior of the coatings. The SEM examination shows that the coatings become more compact with the increases of pressure and temperature of driving gas. The potentiodynamic polarization curves indicate that the coating which has lower porosity has lower corrosion current. The polarization and OCP measurement reveal that cold-sprayed Ti coating can provide favorable protection to carbon steel substrate. The polishing treatment of coating surface polishes the rough outer layer including the small pores as well as decreases the actual surface area of the coating, leading to the considerable improvement of corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. T. Kinos, S.L. Chen, P. Siitonen, and P. Kettunen, Corrosion Properties of Shrouded Plasma Sprayed Titanium Coatings, Thermal Spraying—Current Status and Future Trends, A. Ohmori, Ed. (Kobe, Japan), High Temperature Society of Japan, 1995, p 573-576
2. J. Kawakita, S. Kuroda, T. Fukushima, H. Katanoda, K. Matsuo, H. Fukanuma 2006 Dense Titanium Coatings by Modified HVOF Spraying. Surf. Coat. Technol. 201(3-4), 1250-125510.1016/j.surfcoat.2006.01.056 ↗
3. E. Galvanetto, F.P. Galliano, F. Borgioli, U. Bardi, A. Lavacchi 2001 XRD and XPS Study on Reactive Plasma Sprayed Titanium-Titanium Nitride Coatings. Thin Solid Films 384(2), 223-22910.1016/S0040-6090(00)01871-X ↗
4. C.-E. Cui, Q. Miao, J.-D. Pan 2007 Ti/Cr Multi-Layer Coating on Magnesium Alloy AZ91 by Arc-Added Glow Plasma Depositing Technique. Surf. Coat. Technol. 201(9-11), 5400-540310.1016/j.surfcoat.2006.07.188 ↗
5. J. Kawakita, H. Katanoda, M. Watanabe, K. Yokoyama, S. Kuroda 2008 Warm Spraying: An Improved Spray Process to Deposit Novel Coatings. Surf. Coat. Technol. 202(18), 4369-437310.1016/j.surfcoat.2008.04.011 ↗
6. H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, L. Leblanc 2005 Microstructure and Failure Mechanism in As-Deposited, Vacuum Plasma-Sprayed Ti-6Al-4V Alloy. J. Therm. Spray Technol. 14(2), 215-22310.1361/10599630523773 ↗
7. A. Papyrin 2001 A Cold Spray Technology. Adv. Mater. Process 159(9), 49-51
8. T. Stoltenhoff, H. Kreye, H.J. Richter 2002 An Analysis of the Cold Spray Process and Its Coatings. J. Therm. Spray Technol. 11(4), 542-55010.1361/105996302770348682 ↗
9. R.C. McCune, W.T. Donlon, O.O. Popoola, E.L. Cartwright 2000 Characterization of Copper Layers Produced by Cold-Gas-Dynamic Spraying. J. Therm. Spray Technol. 9(1), 7310.1361/105996300770350087 ↗
10. T.H. Van Steenkiste, J.R. Smith, R.E. Teets, J.J. Moleski, D.W. Gorkiewicz, R.P. Tison, D.R. Marantz, K.A. Kowalsky, W.L. Riggs, P.H. Zajchowski, B. Pilsner, R.C. McCune, K.J. Barnett 1999 Kinetic Spray Coatings. Surf. Coat. Technol. 111(1), 6210.1016/S0257-8972(98)00709-9 ↗
11. J. Karthikeyan, C.M. Kay, J. Lindeman, R.S. Lima, and C.C. Berndt, Cold Spray Processing of Titanium Powder, Thermal Spray: Surface Engineering via Applied Research, C.C. Berndt, Ed. (Materials Park, OH), ASM International, 2000, p 255-26210.31399/asm.cp.itsc2000p0255 ↗
12. J. Karthikeyan, C.M. Kay, J. Lindemann, R.S. Lima, and C.C. Berndt, Cold Sprayed Nanostructured WC-Co, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Eds., (Materials Park, OH), ASM International, 2001, p 383-38710.31399/asm.cp.itsc2001p0383 ↗
13. C.-J. Li, W.-Y. Li 2003 Deposition Characteristics of Titanium Coating in Cold Spray. Surf. Coat. Technol. 167(2-3), 278-28310.1016/S0257-8972(02)00919-2 ↗
14. H.J. Kim, C.H. Lee, S.Y. Hwang 2005 Fabrication of WC-Co Coatings by Cold Spray Deposition. Surf. Coat. Technol. 191(2-3), 335-34010.1016/j.surfcoat.2004.04.058 ↗
15. T. Marrocco, D.G. McCartney, P.H. Shipway, A.J. Sturgeon 2006 Production of Titanium Deposits by Cold-Gas Dynamic Spray: Numerical Modeling and Experimental Characterization. J. Therm. Spray Technol. 15(2), 263-27210.1361/105996306X108219 ↗
16. R.E. Blose, Spray Forming Titanium Alloys Using the Cold Spray Process, Thermal Spray Connects: Explore Its Surfacing Potential, E. Lugscheider, Ed. (Düsseldorf, Germany), DVS, 2005 (in CD-ROM)10.31399/asm.cp.itsc2005p0199 ↗
17. W.-Y. Li, C. Zhang, H.-T. Wang, X.-P. Guo, H.-L. Liao, C.-J. Li, C. Coddet 2007 Significant Influences of Metal Reactivity and Oxide Film of Powder Particles on Coating Deposition Characteristics in Cold Spraying. Appl. Surf. Sci. 253, 3557-356210.1016/j.apsusc.2006.07.063 ↗
18. H.R. Wang, W.Y. Li, J. Wang, Q. Wang, L. Ma 2007 Corrosion Behavior of Cold Sprayed Titanium Protective Coating on 1Cr13 Substrate in Seawater. Surf. Coat. Technol. 201(9-11), 5203-520610.1016/j.surfcoat.2006.07.104 ↗
19. R.S. Lima, A. Kucuk, C.C. Berndt 2002 Deposition Efficiency, Mechanical Properties and Coating Roughness in Cold-Sprayed Titanium. J. Mater. Sci. Lett. 21, 1687-168910.1023/A:1020833011448 ↗
20. W.-Y. Li, C.-J. Li, Y.-Y. Wang, G.-J. Yang 2005 Effect of Parameters of Cold Sprayed Cu Particles on Its Impacting Behavior. Acta Metall. Sin. 41(3), 282-286, in Chinese
21. J. Kawakita, T. Fukushima, S. Kuroda, T. Kodama 2002 Corrosion Behavior of HVOF Sprayed sus316L Stainless Steel in Sea Water. Corros. Sci. 44, 2561-258110.1016/S0010-938X(02)00030-6 ↗