journal article·2017-06Open access

Fabrication of Oxide Dispersion Strengthened Bond Coats with Low Al2O3 Content

Jan Bergholz, Bruce A. Pint, Kinga A. Unocic, Robert Vaßen

Abstract

Nanoscale oxide dispersions have long been used to increase the oxidation and wear resistance of alloys used as bond coatings in thermal barrier coatings. Their manufacturing via mechanical alloying is often accompanied by difficulties regarding their particle size, homogeneous distribution of the oxide dispersions inside the powder, involving considerable costs, due to cold welding of the powder during milling. A significant improvement in this process can be achieved by the use of process control agent (PCA) to achieve the critical balance between cold welding and fracturing, thereby enhancing the process efficiency. In this investigation, the influence of the organic additive stearic acid on the manufacturing process of Al2O3-doped CoNiCrAlY powder was investigated. Powders were fabricated via mechanical alloying at different milling times and PCA concentrations. The results showed a decrease in particle size, without hindering the homogeneous incorporation of the oxide dispersions. Two powders manufactured with 0.5 and 1.0 wt.% PCA were deposited by high velocity oxygen fuel (HVOF) spraying. Results showed that a higher content of elongated particles in the powder with the higher PCA content led to increased surface roughness, porosity and decreased coating thickness, with areas without embedded oxide particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. R.A. Miller, Current Status of Thermal Barrier Coatings—An Overview, Surf. Coatings Technol., 1987, 30(1), p 1-1110.1016/0257-8972(87)90003-X ↗
2. N. Czech, H. Fietzek, M. Juez-Lorenzo, V. Kolarik, and W. Stamm, Studies of the Bond-Coat Oxidation and Phase Structure of TBCs, Surf. Coatings Technol., 1999, 113(1-2), p 157-16410.1016/S0257-8972(98)00835-4 ↗
3. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296(5566), p 280-28410.1126/science.1068609 ↗
4. K. Yuan, Oxidation and Corrosion of New MCrAlX Coatings: Modelling and Experiments [Doctoral thesis, Comprehensive Summary; info:eu-repo/semantics/doctoralThesis; text]: Linköpings universitet, Konstruktionsmaterial; 2014.10.3384/diss.diva-111119 ↗
5. L. Ajdelsztajn, F. Tang, G.E. Kim, V. Provenzano, and J.M. Schoenung, Synthesis and Oxidation Behavior of Nanocrystalline MCrAlY Bond Coatings, J. Thermal Spray Technol., 2005, 14(1), p 23-3010.1361/10599630522693 ↗
6. H.E. Evans and M.P. Taylor, Diffusion Cells and Chemical Failure of MCrAlY Bond Coats in Thermal-Barrier Coating Systems, Oxidation of Metals, 2001, 55(1/2), p 17-3410.1023/A:1010369024142 ↗
7. R.A. Miller, Thermal Barrier Coatings for Aircraft Engines: History and Directions, J. Thermal Spray Technol., 1997, 6(1), p 35-4210.1007/BF02646310 ↗
8. K. Ma and J.M. Schoenung, Influence of Cryomilling on the Microstructural Features in HVOF-Sprayed NiCrAlY Bond Coats for Thermal Barrier Coatings: Creation of a Homogeneous Distribution of Nanoscale Dispersoids, Philos. Mag. Lett., 2010, 90(10), p 739-75110.1080/09500839.2010.506424 ↗
9. X. Zhou, Z. Xu, R. Mu, L. He, G. Huang, and X. Cao, Thermal Barrier Coatings with a Double-Layer Bond Coat on Ni3Al Based Single-Crystal Superalloy, J. Alloys Compd., 2014, 591, p 41-5110.1016/j.jallcom.2013.12.040 ↗
10. J.R. Nicholls, Advances in Coating Design for High-Performance Gas Turbines, MRS Bull., 2003, 28(9), p 659-67010.1557/mrs2003.194 ↗
11. P. Richer, M. Yandouzi, B. Jodoin, and L. Beauvais, Oxidation Behaviour of CoNiCrAlY Bond Coats Produced by Plasma, HVOF and Cold Gas Dynamic Spraying, Surf. Coatings Technol., 2010, 204(24), p 3962-397410.1016/j.surfcoat.2010.03.043 ↗
12. D.J. Young, High Temperature Oxidation and Corrosion Of Metals by David John Young, 1st ed., Elsevier, Amsterdam, 2008
13. D. Toma, W. Brandl, and U. Köster, The Characteristics of Alumina Scales Formed on HVOF-Sprayed MCrAlY Coatings, Oxid. Metals, 2000, 53(1-2), p 125-13710.1023/A:1004586814837 ↗
14. W.J. Quadakkers, A. Elschner, W. Speier, and H. Nickel, Composition and Growth Mechanisms of Alumina Scales on FeCrAl-Based Alloys Determined by SNMS, Appl. Surf. Sci., 1991, 52(4), p 271-28710.1016/0169-4332(91)90069-V ↗
15. L. Ajdelsztajn, J.A. Picas, G.E. Kim, F.L. Bastian, J. Schoenung, and V. Provenzano, Oxidation Behavior of HVOF Sprayed Nanocrystalline NiCrAlY Powder, Mater. Sci. Eng., 2002, A338, p 33-4310.1016/S0921-5093(02)00008-4 ↗
16. A. Khatibi, Growth and Heat Treatment Studies of Al-Cr-O and Al-Cr-O-N Thin Films (PhD Thesis). Linköping University Electronic Press, Linköping University; 2013.
17. H. Echsler, D. Renusch, and M. Schütze, Bond Coat Oxidation and its Significance for Life Expectancy of Thermal Barrier Coating Systems, Mater. Sci. Technol., 2004, 20(3), p 307-31810.1179/026708304225012143 ↗
18. A.H. Lefebvre, Atomization and Sprays, Hemisphere Publ, New-York, NY, 1989
19. A. Gil, D. Naumenko, R. Vassen, J. Toscano, M. Subanovic, L. Singheiser et al., Y-rich Oxide Distribution in Plasma Sprayed MCrAlY-Coatings Studied by SEM with a Cathodoluminescence Detector and Raman Spectroscopy, Surf. Coatings Technol., 2009, 204(4), p 531-53810.1016/j.surfcoat.2009.08.034 ↗
20. S. Saeidi, K.T. Voisey, and D.G. McCartney, Mechanical Properties and Microstructure of VPS and HVOF CoNiCrAlY Coatings, Journal of Thermal Spray Technology, 2011, 20(6), p 1210.1007/s11666-011-9666-5 ↗
21. P.L. Fauchais, M.I. Boulos, and J.V.R. Heberlein, Thermal Spray Fundamentals from Powder to Part, Springer, Boston, MA, 201410.1007/978-0-387-68991-3 ↗
22. D. Gawne, Z. Qiu, Y. Bao, T. Zhang, and K. Zhang, Abrasive Wear Resistance of Plasma-Sprayed Glass-Composite Coatings, J. Thermal Spray Technol., 2001, 10(4), p 599-60310.1361/105996301770349114 ↗
23. W.J. Quadakkers, H. Holzbrecher, K.G. Briefs, and H. Beske, Differences in Growth Mechanisms of Oxide Scales Formed on ODS and Conventional Wrought Alloys, Oxid. Metals, 1989, 32(1), p 67-8810.1007/BF00665269 ↗
24. B.A. Pint, K.L. More, and I.G. Wright, The Use of Two Reactive Elements to Optimize Oxidation Performance of Alumina-Forming Alloys, Mater. High Temp., 2003, 20, p 375-76010.1179/mht.2003.044 ↗
25. D. Naumenko, B.A. Pint, and W.J. Quadakkers, Current Thoughts on Reactive Element Effects in Alumina-Forming Systems. In Memory of John Stringer, Oxid. Metals, 2016, 86(1), p 1-4310.1007/s11085-016-9625-0 ↗
26. B.A. Pint, Experimental Observations in Support of the Dynamic-Segregation Theory to Explain the Reactive-Element Effect, Oxid. Metals, 1996, 45(1-2), p 37
27. J. Toscano, R. Vassen, A. Gil, M. Subanovic, D. Naumenko, L. Singhelser et al., Parameters Affecting TGO Growth and Adherence on MCrAly-Bond Coats for TBC’s, Surf. Coatings Technol., 2006, 201(7), p 3906-391010.1016/j.surfcoat.2006.07.247 ↗
28. B.A. Pint, M. Treska, and L.W. Hobbs, The Effect of Various Oxide Dispersions on the Phase Composition and Morphology of Al2O3 Scales Grown on beta-NiAl, Oxid. Metals, 1997, 47(1-2), p 1-2010.1007/BF01682369 ↗
29. P.R. Soni, Mechanical Alloying: Fundamentals and Applications, Cambridge International Science Publishing, Limited, Berlin, 1998
30. J.S. Benjamin, Dispersion Strengthened Superalloys by Mechanical Alloying, Metall. Trans., 1970, 1(10), p 2943-295110.1007/BF03037835 ↗
31. A. Nouri, C. Wen, A. Nouri, and C. Wen, Surfactants in Mechanical Alloying/Milling: A Catch-22 Situation, Crit. Rev. Solid State Mater. Sci., 2014, 39(2), p 81-10810.1080/10408436.2013.808985 ↗
32. S. Sohoni, R. Sohoni, and G. Sridhar Mandal, The Effect of Grinding Aids on the Fine Grinding of Limestone, Quartz and Portland Cement Clinker, Powder Technol., 1991, 67(3), p 277-28610.1016/0032-5910(91)80109-V ↗
33. W. Lee and S.I. Kwun, The Effects of Process Control Agents on Mechanical Alloying Mechanisms in the Ti-Al System, J. Alloys Compd., 1996, 240(1-2), p 193-19910.1016/0925-8388(96)02224-4 ↗
34. A. Bravo, T. Cerulli, M. Giarnetti, and M. Magistri. Grinding Aids: A Study on their Mechanism of Action. International Congress on the Chemistry of Cement. Durban, South Africa: Skokie; 2003. p. 115.
35. K.A. Nazari, A. Nouri, and T. Hilditch, The Addition of a Surfactant at Regular Time Intervals in the Mechanical Alloying Process, J. Alloys Compd., 2014, 615, p 47-5510.1016/j.jallcom.2014.06.142 ↗
36. S. Sheibani, A. Ataie, and S. Heshmati-Manesh, Role of Process Control Agent on Synthesis and Consolidation Behavior of Nano-Crystalline Copper Produced by Mechano-Chemical Route, J. Alloys Compd., 2008, 465(1-2), p 78-8210.1016/j.jallcom.2007.10.062 ↗
37. O.D. Neikov, Handbook of Non-ferrous Metal Powders Technologies and Applications, 1st ed., Elsevier, Amsterdam, 2009
38. J.A. Picas, A. Forn, L. Ajdelsztajn, and J. Schoenung, Nanocrystalline NiCrAlY Powder Synthesis by Mechanical Cryomilling, Powder Technology, 2004, 148(1), p 20-2310.1016/j.powtec.2004.09.015 ↗
39. P.S. Gilman and J.S. Benjamin, Mechanical Alloying, Annu. Rev. Mater. Res., 1983, 13, p 279-300
40. K. Holmberg, B. Jönsson, B. Kronberg, and B. Lindman, Surfactants and Polymers in Aqueous Solution, J. Synth. Lubr., 2004, 20(4), p 367-37010.1002/jsl.3000200408 ↗
41. A. Nouri, P.D. Hodgson, and C.E. Wen, Effect of Process Control Agent on the Porous Structure and Mechanical Properties of a Biomedical Ti-Sn-Nb Alloy Produced by Powder Metallurgy, Acta Biomater., 2010, 6(4), p 1630-163910.1016/j.actbio.2009.10.005 ↗
42. J.S. Benjamin and M.J. Bomford, Dispersion Strengthened Aluminum Made by Mechanical Alloying, MTA, 1977, 8(8), p 1301-130510.1007/BF02643845 ↗
43. K.A. Nazari, A. Nouri, and T. Hilditch, Effects of Milling Time on Powder Packing Characteristics and Compressive Mechanical Properties of Sintered Ti-10Nb-3Mo Alloy, Mater. Lett., 2015, 140, p 55-5810.1016/j.matlet.2014.10.143 ↗
44. J.C. Ye, Z. Lee, B. Ahn, J.H. He, S.R. Nutt, and J.M. Schoenung, Cryomilling for the Fabrication of a Particulate B4C Reinforced Al Nanocomposite: Part II. Mechanisms for Microstructural Evolution, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2006, 37A(10), p 3111-3117
45. R. Bürgel, H. Jürgen Maier, and T. Niendorf. Handbuch Hochtemperatur- Werkstofftechnik Grundlagen, Werkstoffbeanspruchungen, Hochtemperaturlegierungen und -beschichtungen/von Ralf Bürgel, Hans Jürgen Maier, Thomas Niendorf. [E-Book]. 4., überarbeitete Auflage. ed. Wiesbaden: Vieweg+Teubner Verlag / Springer Fachmedien Wiesbaden GmbH, Wiesbaden; 2011.10.1007/978-3-8348-9907-1 ↗
46. W. Wong, P. Vo, E. Irissou, A.N. Ryabinin, J.G. Legoux, and S. Yue, Effect of Particle Morphology and Size Distribution on Cold-Sprayed Pure Titanium Coatings, J. Thermal Spray Technol., 2013, 22(7), p 1140-115310.1007/s11666-013-9951-6 ↗
47. S.F. Hoerner, Fluid-dynamic Drag; Practical Information on Aerodynamic Drag and Hydrodynamic Resistance, Hoerner Fluid Dynamics, Midland Park, NJ, 1965
48. U. vd Crone, M. Hänsel, W.J. Quadakkers, and R. Vaßen, Oxidation Behavior of Mechanically Alloyed Chromium Based Alloys, Fresenius’ J. Anal. Chem., 1997, 358(1-2), p 230-23210.1007/s002160050391 ↗