journal article·2008-06

Tensile Test Specimens with a Circumferential Precrack for Evaluation of Interfacial Toughness of Thermal-Sprayed Coatings

Akio Kishi, Seiji Kuroda, Tadanobu Inoue, Takeshi Fukushima, Hisami Yumoto

Publisher page

Abstract

A new testing procedure to evaluate the interfacial toughness of thermal-sprayed coatings has been developed. The newly designed test specimen is a modification of the pin test with an artificially introduced weak interface, which is expected to open up easily under tensile loading and act as a circumferential precrack along the interface between a coating and the substrate. This configuration makes it possible to calculate the stress intensity factor K Int at the tip of the precrack, which can be expressed as $$ K_{{{\text{Int}}}} = \upsigma_{{\text{0}}} {\sqrt { \uppi a}}F_{{\text{I}}} (a{\text{/}}R) $$ , where σ0 is the apparent average stress, a the crack length, R the specimen radius, and F I the geometrical correction function. Finite-element analysis was carried out to calculate the correction function F I for various values of a/R. In the experiments, the flat surface of a pin was grit-blasted and a ring-shaped area from the periphery was covered with carbon using a pencil and set into a mating dice. SUS316L stainless steel was plasma-sprayed onto the flat surface of the pin and the dice. Then, tensile load was applied to the pin to break the weak interface containing the carbon and finally the unmodified coating-substrate interface. The load required to pull out the pin was measured for various specimen parameters such as a and R. The results indicate that the adhesion of the tested coatings can be represented by interface toughness of 1.9 ± 0.1 MPa m1/2. As a consequence, this testing procedure can be considered as a viable method to evaluate adhesion of a thermal-sprayed coating on a substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. S. Kuroda, J. Kawakita, T. Fukushima, S. Tobe, Importance of the Adhesion of HVOF Sprayed Coatings for Aqueous Corrosion Resistance, Mater. Trans., 2003, 44(3), p 381-38810.2320/matertrans.44.381 ↗
2. T. Sundararajan, S. Kuroda, F. Abe, S. Sodeoka, Effect of Thermal Cycling on the Adhesive Strength of Ni-Cr Coatings, Surface Coat. Technol., 2005, 194, p 290-29910.1016/j.surfcoat.2004.05.033 ↗
3. M.F. Bahbou, P. Nylén, and J. Wigren, Effect of Grit Blasting and Spraying Angle on the Adhesion Strength of a Plasma-sprayed Coating, J. Thermal Spray Technol., 2004, 13(4), p 508-51410.1361/10599630421406 ↗
4. V. Pershin, M. Lufitha, S. Chandra, J. Mostaghimi Effect of Substrate Temperature on Adhesion Strength of Plasma-sprayed Nickel Coatings , J. Thermal Spray Technol., 2003, 12(3), p 370-37610.1361/105996303770348249 ↗
5. P. Fauchais, A. Vardelle, M. Vardelle, M. Fukumoto, Knowledge Concerning Splat Formation: An Invited Review, J. Thermal Spray Technol., 2004, 13(3), p 337-36010.1361/10599630419670 ↗
6. S. Kuroda, T. Fukushima, S. Kitahara, Significance of Quenching Stress in the Cohesion and Adhesion of Thermally Sprayed Coatings, J. Thermal Spray Technol., 1992, 1(4), p 25–33210.1007/BF02647160 ↗
7. C.K. Lin, C.C. Berndt, Measurement and Analysis of Adhesion Strength for Thermally Sprayed Coatings, J. Thermal Spray Technol., 1994, 3(1), p 75–10410.1007/BF02649003 ↗
8. L.W. Crane, C.L. Johnston, and D.H. James, Effect of Processing Parameters on the Shear Adhesion Strength of Arc Sprayed Deposits, Proc. 10th Int. Thermal Spraying Conf., DVS, Germany Welding Society, Dusseldorf, Germany, 1983, p 46-50
9. M. Fukumoto, H. Murakami, I. Okane, H. Harada, Improved Ring Shear Test for the Evaluation of Adhesion Strength of Thermal Sprayed Coating, Nippon Kinzoku Gakkaishi, (J. Japan Inst. Metal), 1995, 59(1), p 84-88. (in Japanese)
10. S.J. Howard, T.W. Clyne, Interfacial Fracture-Toughness of Vacuum-Plasma-Sprayed Coatings, Sur. Coat. Technol., 1991, 45 (1-3), p 333-34210.1016/0257-8972(91)90240-W ↗
11. M. Sexsmith, T. Troczynski, Peel Adhesion Test for Thermal Spray Coatings, J. Thermal Spray Technol., 1994, 3(4), p 404-41110.1007/BF02658986 ↗
12. C.C. Berndt and R. McPherson, A Fracture Mechanics Approach to the Adhesion of Flame and Plasma Sprayed Coatings, Proc. 9th Int. Thermal Spraying Conf., Amsterdam, 1980, p 310-316
13. P. Ostojic, R. McPherson: Determining the Critical Strain Energy Release Rate of Plasma-sprayed Coating Using a Double-cantilever-beam Technique, J. Amer. Ceramic Soc., 1988, 10, p 891-89910.1111/j.1151-2916.1988.tb07542.x ↗
14. D. Chicot, P. Démarécaux, J. Lesage, Apparent Interface Toughness of Substrate and Coating Couples from Indentation Tests, Thin Solid Films, 1996, 283(1), p 151-15710.1016/0040-6090(96)08763-9 ↗
15. J. Lesage, D. Chicot, Role of Residual Stresses on Interface Toughness of Thermally Sprayed Coatings, Thin Solid Films, 2002, 415 (1), p 143-15010.1016/S0040-6090(02)00488-1 ↗
16. ISO 14916:1999, Thermal Spraying—Determination of Tensile Adhesive Strength, ISO/TC 107
17. ASTM C633-01, Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings, American Society of Testing Materials, Philadelphia, 2001
18. JIS H 8402:2004, Test Methods of Tensile Adhesive Strength for Thermal-Sprayed Coatings. Japanese Standards Association, Tokyo (in Japanese)
19. M. Watanabe, A. Owada, S. Kuroda, Y. Goto, Effect of WC Size on Interface Fracture Toughness of WC-Co HVOP Sprayed Coatings, Surface Coat. Technol., 2006, 201(3-4), p 619-62710.1016/j.surfcoat.2005.12.019 ↗
20. Y. Inoue, T. Ono, A. Noutomi, A. Izuha, M. Toyoda, M. Tsukamoto, Adhesive Strength Evaluation of Plasma Sprayed Coatings by Tensile Pin Test, Quart. J. Jpn Weld. Soc., 1991, 9(1), p 167-173. (in Japanese)10.2207/qjjws.9.167 ↗
21. A. Kishi, S. Kuroda, T. Fukushima, T. Inoue, Adhesive Strength Evaluation of HVOF Thermal Sprayed Coatings by Tensile Pin Test, Preprint Natl Meet. Jpn Weld. Soc.,2001, 69, p 212-213 (in Japanese)
22. G. Qian, T. Nakamura, C.C. Berndt, S.H. Leigh, Tensile Toughness Test and High Temperature Fracture Analysis of Thermal Barrier Coatings, Acta Mater., 1997, 45(4), p 1767-178410.1016/S1359-6454(96)00257-1 ↗
23. R. Yuuki, Kaimen No Rikigaku (Mechanics of Interface), Baifuukan Co., Ltd, Tokyo, 1993, p 91-105. (in Japanese)
24. S. Kuroda, T.W. Clyne, The Quenching Stress in Thermally Sprayed Coatings, Thin Solid Film, 1991, 200(1), p 49-6610.1016/0040-6090(91)90029-W ↗
25. M. Watanabe, S. Kuroda, K. Yokoyama, T. Inoue, Y. Gotoh, Modified Tensile Adhesion Test for Evaluation of Interfacial Toughness of HVOF Sprayed Coatings, Surf. Coat. Technol., 2008, 202(9), p 1746-175210.1016/j.surfcoat.2007.07.028 ↗