journal article·2023-03

Nitriding Effect on HVAF FeMnCrSi Coating

Willian Rafael de Oliveira, Andre Renan Mayer, Gelson Biscaia de Souza, Hipólito Domingo Carvajal Fals, Anderson Geraldo Marenda Pukasiewicz

Journal of Thermal Spray Technology· Volume 32· Issue 2-3
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. W. Guo, Y. Wu, J. Zhang, S. Hong, G. Li, G. Ying, J. Guo, and Y. Qin, Fabrication and Characterization of Thermal-Sprayed Fe-Based Amorphous/Nanocrystalline Composite Coatings: An Overview, J. Therm. Spray Technol., 2014, 23(7), p 1157-1180.10.1007/s11666-014-0096-z ↗
2. W. Yang, C.D. Nicolet, P.D. Norrlund, U.P. Lundin, J. Yang, W. Guo, W. Zeng, C. Wang, L. Saarinen, P. Norrlund, J. Chen, Y. Teng, T. Yi, Z. Wei, R. Tang, H. Wang, C.Y. Chung, U. Lundin, J. Bladh, A. Witt, and B. Smith, Hydropower Plants and Power Systems: Dynamic Processes and Control for Stable and Efficient Operation. (2017)
3. R.Q. Guo, C. Zhang, Q. Chen, Y. Yang, N. Li, and L. Liu, Study of Structure and Corrosion Resistance of Fe-Based Amorphous Coatings Prepared by HVAF and HVOF, Corros. Sci., 2011, 53(7), p 2351-2356.10.1016/j.corsci.2010.12.022 ↗
4. L. Jacobs, M.M. Hyland, and M. De Bonte, Comparative Study of WC-Cermet Coatings Sprayed via the HVOF and the HVAF Process, J. Therm. Spray Technol., 1998, 7(2), p 213-218.10.1361/105996398770350954 ↗
5. G. Bolelli, L.M. Berger, T. Börner, H. Koivuluoto, L. Lusvarghi, C. Lyphout, N. Markocsan, V. Matikainen, P. Nylén, P. Sassatelli, R. Trache, and P. Vuoristo, Tribology of HVOF-and HVAF-Sprayed WC-10Co4Cr Hardmetal Coatings: A Comparative Assessment, Surf. Coatings Technol., 2015, 265, p 125-144. https://doi.org/10.1016/j.surfcoat.2015.01.04810.1016/j.surfcoat.2015.01.048 ↗
6. V. Matikainen, G. Bolelli, H. Koivuluoto, P. Sassatelli, L. Lusvarghi, and P. Vuoristo, Sliding Wear Behaviour of HVOF and HVAF Sprayed Cr3C2-Based Coatings, Wear, 2017, 388-389, p 57-71. https://doi.org/10.1016/j.wear.2017.04.00110.1016/j.wear.2017.04.001 ↗
7. E. Sadeghimeresht, N. Markocsan, and P. Nylén, A Comparative Study on Ni-Based Coatings Prepared by HVAF, HVOF, and APS Methods for Corrosion Protection Applications, J. Therm. Spray Technol., 2016, 25(8), p 1604-1616.10.1007/s11666-016-0474-9 ↗
8. T. Varis, T. Suhonen, J. Laakso, M. Jokipii, and P. Vuoristo, Evaluation of Residual Stresses and Their Influence on Cavitation Erosion Resistance of High Kinetic HVOF and HVAF-Sprayed WC-CoCr Coatings, J. Therm. Spray Technol., 2020, 29(6), p 1365-1381. https://doi.org/10.1007/s11666-020-01037-210.1007/s11666-020-01037-2 ↗
9. J.A. Browning, Viewing the Future of High-Velocity Oxyfuel (HVOF) and High-Velocity Air Fuel (HVAF) Thermal Spraying, J. Therm. Spray Technol., 1999, 8(3), p 1.
10. W. Luo, U. Selvadurai, and W. Tillmann, Effect of Residual Stress on the Wear Resistance of Thermal Spray Coatings, J. Therm. Spray Technol., 2016, 25(1-2), p 321-330.10.1007/s11666-015-0309-0 ↗
11. Y. Sun, Kinetics of Layer Growth during Plasma Nitriding of Nickel Based Alloy Inconel 600, J. Alloys Compd., 2003, 351(1-2), p 241-247.10.1016/S0925-8388(02)01034-4 ↗
12. F. Kahraman and S. Karadeniz, Characterization and Wear Behavior of Plasma Nitrided Nickel Based Dental Alloy, Plasma Chem. Plasma Process., 2011, 31(4), p 595-604.10.1007/s11090-011-9301-8 ↗
13. K.M. Eliasen, T.L. Christiansen, and M.A.J. Somers, Low Temperature Gaseous Nitriding of Ni Based Superalloys, Surf. Eng., 2009, 26(4), p 248-255.10.1179/026708409X12490360426043 ↗
14. F. Meng and I. Baker, Nitriding of a High Entropy FeNiMnAlCr Alloy, J. Alloys Compd., 2015, 645, p 376-381. https://doi.org/10.1016/j.jallcom.2015.05.02110.1016/j.jallcom.2015.05.021 ↗
15. D.L. Williamson, O. Ozturk, R. Wei, and P.J. Wilbur, Metastable Phase Formation and Enhanced Diffusion in f.c.c. Alloys under High Dose, High Flux Nitrogen Implantation at High and Low Ion Energies, Surf. Coatings Technol., 1994, 65(1-3), p 15-23.10.1016/S0257-8972(94)80003-0 ↗
16. H. Dong, S-Phase Surface Engineering of Fe-Cr, Co-Cr and Ni-Cr Alloys, Int. Mater. Rev., 2010, 55(2), p 65-98.10.1179/095066009X12572530170589 ↗
17. W.R. de Oliveira, B.C.E.S. Kurelo, D.G. Ditzel, F.C. Serbena, C.E. Foerster, and G.B. de Souza, On the S-Phase Formation and the Balanced Plasma Nitriding of Austenitic-Ferritic Super Duplex Stainless Steel, Appl. Surf. Sci., 2018, 434, p 1161-1174.10.1016/j.apsusc.2017.11.021 ↗
18. G.B. de Souza, W.R. de Oliveira, R.F. Chuproski, G.M. Valadão, O.M. Cintho, E.C.F. de Souza, and F.C. Serbena, Symmetry between the Anisotropic N Behavior in the Lattice under High Pressures and the Formation of Expanded Austenite, J. Alloys Compd., 2021, 871, p 159509.10.1016/j.jallcom.2021.159509 ↗
19. L.L. Silveira, A.G.M. Pukasiewicz, D.J.M. de Aguiar, A.J. Zara, and S. Björklund, Study of the Corrosion and Cavitation Resistance of HVOF and HVAF FeCrMnSiNi and FeCrMnSiB Coatings, Surf. Coat. Technol., 2019, 374, p 910-922.10.1016/j.surfcoat.2019.06.076 ↗
20. A. Milanti, V. Matikainen, G. Bolelli, H. Koivuluoto, L. Lusvarghi, and P. Vuoristo, Microstructure and Sliding Wear Behavior of Fe-Based Coatings Manufactured with HVOF and HVAF Thermal Spray Processes, J. Therm. Spray Technol., 2016, 25(5), p 1040-1055.10.1007/s11666-016-0410-z ↗
21. E. Sadeghimeresht, N. Markocsan, and P. Nylén, Microstructural Characteristics and Corrosion Behavior of HVAF-and HVOF-Sprayed Fe-Based Coatings, Surf. Coatings Technol., 2017, 318, p 365-373.10.1016/j.surfcoat.2016.11.088 ↗
22. T. Varis, A. Mäkelä, T. Suhonen, J. Laurila, and P. Vuoristo, Integrity of APS, HVOF and HVAF Sprayed NiCr and NiCrBSi Coatings Based on the Tensile Stress-Strain Response, Surf. Coatings Technol., 2022, 2023, p 452.
23. Y. Li, D.S. Martín, J. Wang, C. Wang, and W. Xu, A Review of the Thermal Stability of Metastable Austenite in Steels: Martensite Formation, J. Mater. Sci. Technol., 2021, 91, p 200-214. https://doi.org/10.1016/j.jmst.2021.03.02010.1016/j.jmst.2021.03.020 ↗
24. H. Hotz, B. Kirsch, T. Zhu, M. Smaga, T. Beck, and J.C. Aurich, Surface Layer Hardening of Metastable Austenitic Steel-Comparison of Shot Peening and Cryogenic Turning, J. Mater. Res. Technol., 2020, 9(6), p 16410-16422. https://doi.org/10.1016/j.jmrt.2020.11.10910.1016/j.jmrt.2020.11.109 ↗
25. D.L. Williamson, W. Li, R. Wei, and P.J. Wilbur, Solid Solution Strengthening of Stainless Steel Surface Layers by Rapid, High-Dose, Elevated Temperature Nitrogen Ion Implantation, Mater. Lett., 1990, 9(9), p 302-308.10.1016/0167-577X(90)90166-J ↗
26. S. Mändl, J. Lutz, C. Díaz, J.W. Gerlach, and J.A. García, Reprint of Influence of Reduced Current Density on Diffusion and Phase Formation during PIII Nitriding of Austenitic Stainless Steel and CoCr Alloys, Surf. Coatings Technol., 2014, 256, p 78-84.10.1016/j.surfcoat.2014.06.025 ↗
27. A.P. Tschiptschin, A.S. Nishikawa, L.B. Varela, and C.E. Pinedo, Thermal Stability of Expanded Austenite Formed on a DC Plasma Nitrided 316L Austenitic Stainless Steel, Thin Solid Films, 2017, 644(June), p 156-165.10.1016/j.tsf.2017.06.065 ↗
28. S. Mändl, R. Dunkel, D. Hirsch, and D. Manova, Intermediate Stages of CrN Precipitation during PIII Nitriding of Austenitic Stainless Steel, Surf. Coat. Technol., 2014, 258, p 722-726.10.1016/j.surfcoat.2014.08.007 ↗
29. W.R. de Oliveira, Influência Dos Parâmetros De Implantação Iônica Por Imersão Em Plasma Na Eficiência Da Nitretação Do Aço Inoxidável Super Duplex. Universidade Estadual De Ponta Grossa. (2016)
30. T. Moskalioviene, A. Galdikas, J.P. Rivière, and L. Pichon, Modeling of Nitrogen Penetration in Polycrystalline AISI 316L Austenitic Stainless Steel during Plasma Nitriding, Surf. Coatings Technol., 2011, 205(10), p 3301-3306.10.1016/j.surfcoat.2010.11.060 ↗
31. T. Moskalioviene and A. Galdikas, Kinetic Model of Anisotropic Stress Assisted Diffusion of Nitrogen in Nitrided Austenitic Stainless Steel, Surf. Coatings Technol., 2018, 366, p 277-285.10.1016/j.surfcoat.2019.03.054 ↗
32. K. Yang, C. Chen, G. Xu, Z. Jiang, S. Zhang, and X. Liu, HVOF Sprayed Ni-Mo Coatings Improved by Annealing Treatment: Microstructure Characterization, Corrosion Resistance to HCl and Corrosion Mechanisms, J. Mater. Res. Technol., 2022, 19, p 1906-1921. https://doi.org/10.1016/j.jmrt.2022.05.18110.1016/j.jmrt.2022.05.181 ↗
33. T. Wang and F. Ye, The Elevated-Temperature Wear Behavior Evolution of HVOF Sprayed Tungsten Carbide Coatings: Respond to Heat Treatment, Int. J. Refract. Met. Hard Mater., 2018, 71, p 92-100. https://doi.org/10.1016/j.ijrmhm.2017.11.00710.1016/j.ijrmhm.2017.11.007 ↗
34. D. Bhadraiah, C. Nouveau, B. Veeraswami, and K.R.M. Rao, Plasma Based Nitriding of Tool Steel for the Enhancement of Hardness, Mater. Today Proc., 2021, 46, p 940-943. https://doi.org/10.1016/j.matpr.2021.01.18510.1016/j.matpr.2021.01.185 ↗
35. K.R.M. Rao, C. Nouveau, and K. Trinadh, Low Temperature Plasma Nitriding of Low Alloy Steel for the Enhancement of Hardness, Mater. Today Proc., 2019, 17, p 26-33. https://doi.org/10.1016/j.matpr.2019.06.39710.1016/j.matpr.2019.06.397 ↗
36. D. Bhadraiah, C. Nouveau, B. Veeraswami, S. Lakshman, and K.R.M. Rao, Enhancement of Hardness of Low Alloy Steel after Low Temperature Plasma Nitriding, Mater. Today Proc., 2021, 46, p 689-691. https://doi.org/10.1016/j.matpr.2020.11.100410.1016/j.matpr.2020.11.1004 ↗
37. M. Oksa and J. Metsäjoki, Optimizing NiCr and FeCr HVOF Coating Structures for High Temperature Corrosion Protection Applications, J. Therm. Spray Technol., 2014, 24(3), p 436-453.10.1007/s11666-014-0192-0 ↗
38. G.D. Mahan, Condensed Matter in a Nutshell, n.d
39. B.C.E. SchibicheskiKurelo, W.R. de Oliveira, F.C. Serbena, and G.B. de Souza, Surface Mechanics and Wear Resistance of Supermartensitic Stainless Steel Nitrided by Plasma Immersion Ion Implantation, Surf. Coat. Technol., 2018, 353, p 199-209.10.1016/j.surfcoat.2018.08.079 ↗
40. G. Bolelli and L. Lusvarghi, Heat Treatment Effects on the Tribological Performance of HVOF Sprayed Co-Mo-Cr-Si Coatings, Proc. Int. Therm. Spray Conf., 2006, 15(December), p 802-810.
41. H. Guo, X. Zhao, Y. An, H. Zhou, P. Yan, Z. Wu, and J. Chen, Fabrication and Effect of Heat Treatment on the Microstructure and Tribology Properties of HVOF-Sprayed CoMoCrSi Coating, J. Mater. Sci., 2021, 56(21), p 12423-12437. https://doi.org/10.1007/s10853-021-05986-z10.1007/s10853-021-05986-z ↗
42. G. Bolelli and L. Lusvarghi, Tribological Properties of HVOF As-Sprayed and Heat Treated Co-Mo-Cr-Si Coatings, Tribol. Lett., 2007, 25(1), p 43-54.10.1007/s11249-006-9136-2 ↗
43. M. Isakhani-Zakaria, S.R. Allahkaram, and H.A. Ramezani-Varzaneh, Evaluation of Corrosion Behaviour of Pb-Co3O4 Electrodeposited Coating Using EIS Method, Corros. Sci., 2019, 157, p 472-480. https://doi.org/10.1016/j.corsci.2019.06.02310.1016/j.corsci.2019.06.023 ↗
44. M.M. Verdian, K. Raeissi, and M. Salehi, Corrosion Performance of HVOF and APS Thermally Sprayed NiTi Intermetallic Coatings in 3.5% NaCl Solution, Corros. Sci., 2010, 52(3), p 1052-1059. https://doi.org/10.1016/j.corsci.2009.11.03410.1016/j.corsci.2009.11.034 ↗
45. S. Hong, Y. Wu, W. Gao, J. Zhang, Y. Zheng, and Y. Zheng, Slurry Erosion-Corrosion Resistance and Microbial Corrosion Electrochemical Characteristics of HVOF Sprayed WC-10Co-4Cr Coating for Offshore Hydraulic Machinery, Int. J. Refract. Met. Hard Mater., 2018, 74, p 7-13. https://doi.org/10.1016/j.ijrmhm.2018.02.01910.1016/j.ijrmhm.2018.02.019 ↗
46. J. Du, J. Zhang, J. Xu, and C. Zhang, Cavitation-Corrosion Behaviors of HVOF Sprayed WC-25WB-10Co-5NiCr and MoB-25NiCr Coatings, Ceram. Int., 2020, 46(13), p 21707-21718. https://doi.org/10.1016/j.ceramint.2020.05.27910.1016/j.ceramint.2020.05.279 ↗
47. F. Mindivan and H. Mindivan, Surface Properties and Tribocorrosion Behaviour of a Thermal Sprayed Martensitic Stainless Steel Coating after Pulsed Plasma Nitriding Process, Adv. Mater. Process. Technol., 2016, 2(4), p 514-526. https://doi.org/10.1080/2374068X.2016.124723210.1080/2374068X.2016.1247232 ↗
48. M. Godec, C. Donik, A. Kocijan, B. Podgornik, and D.A. SkobirBalantič, Effect of Post-Treated Low-Temperature Plasma Nitriding on the Wear and Corrosion Resistance of 316L Stainless Steel Manufactured by Laser Powder-Bed Fusion, Addit. Manuf., 2020, 32, p 101000.
49. S. Adachi and N. Ueda, Formation of Expanded Austenite on a Cold-Sprayed AISI 316L Coating by Low-Temperature Plasma Nitriding, J. Therm. Spray Technol., 2015, 24(8), p 1399-1407.10.1007/s11666-015-0278-3 ↗