journal article·2014-08

Evaluation of Cyclic Oxidation and Hot Corrosion Behavior of HVOF-Sprayed WC-Co/NiCrAlY Coating

B. Somasundaram, Ravikiran Kadoli, M. R. Ramesh

Publisher page

Abstract

Corrosion of metallic structural materials at an elevated temperature in complex multicomponent gas environments are potential problems in many fossil energy systems, especially those using coal as a feedstock. Combating these problems involves a number of approaches, one of which is the use of protective coatings. The high velocity oxy fuel (HVOF) process has been used to deposit WC-Co/NiCrAlY composite powder on two types of Fe-based alloys. Thermocyclic oxidation behavior of coated alloys was investigated in the static air as well as in molten salt (Na2SO4-60%V2O5) environment at 700 °C for 50 cycles. The thermogravimetric technique was used to approximate the kinetics of oxidation. WC-Co/NiCrAlY coatings showed a lower oxidation rate in comparison to uncoated alloys. The oxidation resistance of WC-Co/NiCrAlY coatings can be ascribed to the oxide layer of Al2O3 and Cr2O3 formed on the outermost surface. Coated alloys extend a protective oxide scale composed of oxides of Ni and Cr that are known to impart resistance to the hot corrosion in the molten salt environment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Coal Combustion and Slurry Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. S.T. Bluni and A.R. Marder, Effect of Thermal Spray Coating Composition and Microstructure on Coating Response and Substrate Protection at High Temperatures, Corros., 1996, 52(3), p 213-21810.5006/1.3292116 ↗
2. J.N. Harb and E.E. Smith, Fireside Corrosion in PC-Fired Boilers, Prog. Energy Combust. Sci., 1990, 16(3), p 169-19010.1016/0360-1285(90)90048-8 ↗
3. R. Viswanathan, J. Henry, J. Tanzosh, G. Stanko, J. Shingledecker, B. Vitalis, and R. Purgert, U.S. Program on Materials Technology for Ultra-Supercritical Coal Power Plants, J. Mater. Eng. Perform., 2005, 14(3), p 281-29210.1361/10599490524039 ↗
4. P.S. Sidky and M.G. Hocking, Review of Inorganic Coatings and Coating Processes for Reducing Wear and Corrosion, Br. Corros. J., 1999, 34(3), p 171-18310.1179/000705999101500815 ↗
5. D.B. Meadowcroft, High Temperature Corrosion Alloys and Coatings in Oil- and Coal-Fired Boilers, Mater. Sci. Eng., 1987, 88, p 313-32010.1016/0025-5416(87)90100-5 ↗
6. K. Tani, Y. Harada, and Y. Kobayashi, Unusual Application of Plasma-Sprayed Coatings for Boiler Tubes in Oil-Fired Boilers, Proc. 15th Int. Thermal Spray Conference, Niza, ASM International, 1998, p 951-95610.31399/asm.cp.itsc1998p0951 ↗
7. H. Edris, D.G. McCartney, and A.J. Sturgeon, Microstructural Characterization of High Velocity Oxy-Fuel Sprayed Coatings of Inconel 625, J. Mater. Sci., 1997, 32(4), p 863-87210.1023/A:1018589230250 ↗
8. C.-J. Li, Y.-Y. Wang, and H. Li, Effect of Nano-crystallization of High Velocity Oxy-Fuel-Sprayed Amorphous NiCrBSi Alloy on Properties of the Coatings, J. Vac. Sci. Technol. A, 2004, 22, p 2000-200410.1116/1.1776183 ↗
9. M. Schütze, M. Malessa, V. Rohr, and T. Weber, Development of Coatings for Protection in Specific High Temperature Environments, Surf. Coat. Technol., 2006, 201, p 3872-387910.1016/j.surfcoat.2006.07.262 ↗
10. D. Toma, W. Brandl, and U. Koster, Studies on the Transient Stage of Oxidation of VPS and HVOF Sprayed MCrAlY Coatings, Surf. Coat. Technol., 1999, 120-121, p 8-1510.1016/S0257-8972(99)00332-1 ↗
11. B.G. Seong, S.Y. Hwang, and K.Y. Kim, High Temperature Corrosion of Recuperators Used in Steel Mills, Surf. Coat. Technol., 2000, 126, p 256-26510.1016/S0257-8972(00)00523-5 ↗
12. A. Karimi and Ch. Verdon, Microstructure and Hydroabrasive Wear Behaviour of High Velocity Oxy-Fuel Thermally Sprayed WC-Co(Cr) Coatings, Surf. Coat. Technol., 1993, 57, p 81-8910.1016/0257-8972(93)90340-T ↗
13. P. Kulu and T. Pihl, Selection Criteria for Wear Resistance Powder Coatings Under Extreme Erosive Wear Conditions, Therm. Spray Technol., 2002, 11, p 517-52210.1361/105996302770348646 ↗
14. L.M. Berger, P. Vuoristo, T. Mantyla, and W. Gruner, A Study of Oxidation Behaviour of WC-Co, Cr3C2-NiCr and TiC-Ni-Based Materials in Thermal Spray Processes, Thermal Spray: Meeting the Challenges of the 21st Century, Proceedings of the 15th International Thermal Spray Conference, vol. 1, ASM International, Materials Park, OH, USA, 1998, p 75-8210.31399/asm.cp.itsc1998p0075 ↗
15. G.R. Heath, P. Heimgartner, G. Irons, R. Miller, and S. Gustafsson, An Assessment of Thermal Spray Coating Technologies for High Temperature Corrosion Protection, Mater. Sci. Forum, 1997, 251-254, p 809-81610.4028/www.scientific.net/MSF.251-254.809 ↗
16. J.R. Nicholls, Designing Oxidation-Resistant Coatings, J. Mater., 2000, 52, p 28-35
17. B.S. Sidhu and S. Prakash, Evaluation of the Corrosion Behaviour of Plasma-Sprayed Ni3Al Coatings on Steel in Oxidation and Molten Salt Environments at 900 °C, Surf. Coat. Technol., 2003, 166, p 89-10010.1016/S0257-8972(02)00772-7 ↗
18. T.S. Sidhu, S. Prakash, and R.D. Agrawal, Characterisations of HVOF Sprayed NiCrBSi Coatings on Ni- and Fe-Based Superalloys and Evaluation of Cyclic Oxidation Behavior of Some Ni-Based Superalloys in Molten Salt Environment, Thin Solid Films, 2006, 515, p 95-10510.1016/j.tsf.2005.12.041 ↗
19. M.R. Ramesh, S. Prakash, S.K. Nath, P.K. Sapra, and B. Venkataraman, Solid Particle Erosion of HVOF Sprayed WC-Co/NiCrFeSiB Coatings, Wear, 2010, 269, p 197-20510.1016/j.wear.2010.03.019 ↗
20. K.L. Luthra, Kinetics of the Low Temperature Hot Corrosion of Co-Cr-Al Alloys, J. Electrochem. Soc., 1985, 132(6), p 1293-129810.1149/1.2114105 ↗
21. X. Deng, P. Wei, M.R. Bateni, and A. Petric, Cobalt Plating of High Temperature Stainless Steel Interconnects, J. Power Sources, 2006, 160, p 1225-122910.1016/j.jpowsour.2006.03.024 ↗
22. S. Espevik, R.A. Rapp, P.L. Daniel, and J.P. Hirth, Oxidation of Ni-Cr-W Ternary Alloys, Oxid. Met., 1980, 14(2), p 85-10810.1007/BF00603987 ↗
23. H.S. Sidhu, B.S. Sidhu, and S. Prakash, The Role of HVOF Coatings in Improving Hot Corrosion Resistance of ASTM-SA210 GrA1 Steel in the Presence of Na2SO4-V2O5 Salt Deposits, Surf. Coat. Technol., 2006, 200, p 5386-539410.1016/j.surfcoat.2005.07.008 ↗
24. C.J. Wang and J.S. Lin, The Oxidation of MAR M247 Superalloy with Na2SO4 Coating, Mater. Chem. Phys., 2002, 76, p 123-12910.1016/S0254-0584(01)00527-2 ↗
25. D.B. Lee, J.H. Ko, and S.C. Kwon, Oxidation of Ni-W Coatings at 700 and 800 °C in Air, Surf. Coat. Technol., 2005, 193, p 292-29610.1016/j.surfcoat.2004.08.151 ↗
26. I. Gurrappa, Hot Corrosion Behavior of CM 247 LC Alloy in Na2SO4 and NaCl Environments, Oxid. Met., 1999, 51, p 353-38210.1023/A:1018831025272 ↗
27. K.R. Peters, D.P. Whittle, and J. Stringer, Oxidation and Hot Corrosion of Nickel Based Alloys Containing Molybdenum, Corros. Sci., 1976, 16, p 791-80410.1016/0010-938X(76)90010-X ↗
28. U.K. Chatterjee, S.K. Bose, and S.K. Roy, Environmental Degradation of Metals, Marcel Dekker, New York, 200110.1201/9781482292244 ↗
29. F.H. Stott, Developments in Understanding the Mechanisms of Growth of Protective Scales on High-Temperature Alloys, Mater. Charact., 1992, 28(3), p 311-32510.1016/1044-5803(92)90019-E ↗