Gas Gun Flyer Plate Impact Testing of Stainless Steel Deposited by Low Pressure Plasma Spraying and Cold Gas Dynamic Spraying
Source abstract
Abstract
Abstract In this study, 316 stainless was deposited by low-pressure plasma spraying under various conditions to obtain different coating structures and by cold gas dynamic spraying for comparison. The coatings were characterized by cross-sectional metallography to assess porosity, oxidation, particle flattening, and elemental composition. The samples were also subjected to flyer plate impact testing in a gas gun to determine their shock propagation and porosity compaction properties. Comparing the results with that of the reference sample shows the effect of deposition conditions on the dynamic behavior of the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Diamond and Carbon-based Materials Research · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. K. Hollis, M. Hawley, and P. Dickerson, Characterization of Thermal Diffusion Related Properties in Plasma Sprayed Zirconium Coatings, J. Therm. Spray Technol., 2012, 21(3), p 409-41510.1007/s11666-011-9718-x ↗
2. J.A. Gan and C.C. Berndt, Effects of Standoff Distance on Porosity, Phase Distribution and Mechanical Properties of Plasma Sprayed Nd-Fe-B Coatings, Surf. Coat. Technol., 2013, 216, p 127-13810.1016/j.surfcoat.2012.11.040 ↗
3. I. Ozdemir, C. Tekmen, S.C. Okumus, and E. Celik, Thermal Behavior of Plasma-Sprayed Mo Coating on Cast-Iron Substrate, Surf. Coat. Technol., 2003, 174–5, p 1064-106910.1016/S0257-8972(03)00537-1 ↗
4. R.M. Molak, H. Araki, M. Watanabe, H. Katanoda, N. Ohno, and S. Kuroda, Effects of Spray Parameters and Post-Spray Heat Treatment on Microstructure and Mechanical Properties of Warm-Sprayed Ti-6Al-4 V Coatings, J. Therm. Spray Technol., 2017, 26(4), p 62710.1007/s11666-016-0494-5 ↗
5. Y. Chen, Y. Tan, S. Tessarini, and S. Sampath, Integrated Study of APS YSZ Coatings with Different Spray Angle, J. Therm. Spray Technol., 2013, 22(2–3), p 110-11510.1007/s11666-012-9841-3 ↗
6. A.C. Hall, C.M. Weyant, J.L. Wise, C.A. Hall, S.C. Jones, D.A. Urrea, J.F. McCloskey, J.W. Cates, T.J. Roemer, A.J. Mayer, D.E. Betty, and D.A. Hirschfeld, Graded Coatings for Light Gas Gun Flyer Plate Applications, SAND2005-7690C, Sandia National Laboratories, Albuquerque, NM, 2005
7. D.E. Crawmer, Thermal Spray Processes, Handbook of Thermal Spray Technology, J.R. Davis, Ed., ASM International, Metals Park, OH, 2005, p 70-72
8. D.E. Crawmer, Cold Spray Process, Handbook of Thermal Spray Technology, J.R. Davis, Ed., ASM International, Metals Park, OH, 2005, p 77-84
9. J.H. Ouyang, S. Sasaki, and K. Umeda, Low-Pressure Plasma-Sprayed ZrO2-CaF2 Composite Coating for High Temperature Tribological Applications, Surf. Coat. Technol., 2001, 137(1), p 21-3010.1016/S0257-8972(00)00918-X ↗
10. K. Hollis, C. Liu, R. Leckie, and M. Lovato, Bulge Testing and Interface Fracture Characterization of Plasma-Sprayed and HIP Bonded Zr Coatings on U-Mo, J. Therm. Spray Technol., 2015, 24(1), p 271-279
11. D. Yang, B. Tian, and Y. Gao, The Lamellar-Equiaxed Microstructural Transition of 316L Coatings by Low Pressure Plasma Spraying, Surf. Coat. Technol., 2013, 228, p S72-S7610.1016/j.surfcoat.2012.08.026 ↗
12. P. Coddet, C. Verdy, C. Coddet, F. Lecouturier, and F. Debray, Mechanical Properties of Cold Spray Deposited NARloy-Z Copper Alloy, Surf. Coat. Technol., 2013, 232, p 65210.1016/j.surfcoat.2013.06.062 ↗
13. V. Luzin, K. Spencer, and M. Zhang, Residual Stress and Thermo-Mechanical Properties of Cold Spray Metal Coatings, Acta Mater., 2011, 59(3), p 1259-127010.1016/j.actamat.2010.10.058 ↗
14. M. Rokni, S. Nutt, C. Widener, V. Champagne, and R. Hrabe, Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray, J. Therm. Spray Technol., 2017, 26(6), p 1308-135510.1007/s11666-017-0575-0 ↗
15. G.T. Gray, III, Shock-Wave Testing of Ductile Materials, Mechanical Testing and Evaluation, ASM Handbook, Vol 8, J. Kuhn and D. Medlin, Ed., ASM International, Metals Park, Ohio, 2000,
16. D. Jones, S. Fensin, B. Ndefru, D. Martinez, C. Trujillo, and G. Gray, Spall Fracture in Additive Manufactured Tantalum, J. App. Phys., 2018, 124(22), p 22590210.1063/1.5063930 ↗
17. D. Jones, S. Fensin, D. Martinez, C. Trujillo, and G. Gray, Effect of Peak Stress and Tensile Strain-Rate on Spall in Tantalum, J. Appl. Phys., 2018, 124(8), p 22590210.1063/1.5063930 ↗
18. O.T. Strand, D.R. Goosman, C. Martinez, T.L. Whitworth, and W.W. Kuhlow, Compact System for High-Speed Velocimetry Using Heterodyne Techniques, Rev. Sci. Inst., 2006, 77(8), p 08310810.1063/1.2336749 ↗
19. J.R. Asay and M. Shahinpoor, Ed., High Pressure Shock Compression of Solids, Springer, New York, 1993, p 1-399
20. M. Kuczmarski and J. Johnston, Acoustic Absorption in Porous Materials, National Aeronautics and Space Administration report NASA/TM-2011-216995, Cleveland, Ohio, 2011
21. G. Wong, Speed of Sound in Standard Air, J. Acoust. Soc. Am., 1986, 79, p 1359-136610.1121/1.393664 ↗
22. D.H. Dolan, Accuracy and Precision in Photonic Doppler Velocimetry, Rev. Sci. Instrum., 2010, 81(5), p 05390510.1063/1.3429257 ↗
23. S.P. Marsh, LASL Shock Hugoniot Data, University of California Press, Berkeley, CA, 1980, p 1-674
24. Ya B. Zel’dovich and Yu P. Raizer, Physics of Shock Waves and High-Temperature Hydrodynamic Phenomena, Dover Publications, New York, 2002, p 746-750
25. X. Cao, J. Chen, Y. Yu, and Q. Wu, An Equation of State for Abnormal Expansion of Shocked Porous Materials, J. Appl. Phys., 2018, 124(21), p 21590310.1063/1.5047233 ↗
26. Ya B. Zel’dovich and YuP Raizer, Physics of Shock Waves and High-Temperature Hydrodynamic Phenomena, Dover Publications, New York, 2002, p 712-716
27. G.I. Kanel, S.V. Razorenov, and V.E. Fortov, Shock-Wave Phenomena and the Properties of Condensed Matter, Springer, New York, 200410.1007/978-1-4757-4282-4 ↗
28. D.R. Jones, S.J. Fensin, B.G. Ndefru, D.T. Martinez, C.P. Trujillo, and G.T. Gray, Spall Fracture in Additive Manufactured Tantalum, J. Appl. Phys., 2018, 124(22), p 22590210.1063/1.5063930 ↗
29. T.D. Phan, S.H. Masood, S.H. Zahiri, and M.Z. Jahedi, Measurement of Residual Strain in Cold Sprayed Process Using X-Ray Diffraction and Finite Element Method, Adv. Mater. Res., 2011, 214, p 245-24910.4028/www.scientific.net/AMR.214.245 ↗
30. P. Coddet, C. Verdy, C. Coddet, and F. Debray, Effect of Cold Work, Second Phase Precipitation and Heat Treatments on the Mechanical Properties of Copper-Silver Alloys Manufactured by Cold Spray, Mater. Sci. Eng., A, 2015, 637, p 40-4710.1016/j.msea.2015.04.008 ↗