Slurry Erosion Behavior of F6NM Stainless Steel and High-Velocity Oxygen Fuel-Sprayed WC-10Co-4Cr Coating
Source abstract
Abstract
WC-10Co-4Cr coating was applied to the surface of F6NM stainless steel by high-velocity oxygen-fuel spraying. The slurry erosion behavior of the matrix and coating was examined at different rotational speeds using a self-made machine. This experiment effectively simulates real slurry erosion in an environment with high silt load. At low velocity (<6 m/s), the main failure mechanism was cavitation. Small bubbles acted as an air cushion, obstructing direct contact between sand and the matrix surface. However, at velocity above 9 m/s, abrasive wear was the dominant failure mechanism. The results indicate that WC-10Co-4Cr coating significantly improved the slurry resistance at higher velocity, because it created a thin and dense WC coating on the surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. G. Li et al., Sedimentation in the Yellow River Delta, Part II: Suspended Sediment Dispersal and Deposition on the Subaqueous Delta, Mar. Geol., 1998, 149(1-4), p 113-13110.1016/S0025-3227(98)00032-2 ↗
2. B. Pan et al., Sediment Grain-Size Characteristics and Its Source Implication in the Ningxia-Inner Mongolia Sections on the Upper Reaches of the Yellow River, Geomorphology, 2015, 246, p 255-26210.1016/j.geomorph.2015.06.028 ↗
3. D.K. Goyal et al., Erosive Wear Study of HVOF Spray Cr3C2-NiCr Coated CA6NM Turbine Steel, J. Tribol. , 2014, 136(4), p 04160210.1115/1.4027621 ↗
4. J.F. Santa, J.C. Baena, and A. Toro, Slurry Erosion of Thermal Spray Coatings and Stainless Steels for Hydraulic Machinery, Wear, 2007, 263, p 258-26410.1016/j.wear.2006.12.061 ↗
5. S. Bhandari et al., Slurry Erosion Performance Study of Detonation Gun-Sprayed WC-10Co-4Cr Coatings on CF8M Steel Under Hydro-Accelerated Conditions, J. Therm. Spray Technol., 2012, 21(5), p 1054-106410.1007/s11666-012-9799-1 ↗
6. V.P. Singh, A. Sil, and R. Jayaganthan, A Study on Sliding and Erosive Wear Behaviour of Atmospheric Plasma Sprayed Conventional and Nanostructured Alumina Coatings, Mater. Des., 2011, 32(2), p 584-59110.1016/j.matdes.2010.08.019 ↗
7. H.S. Grewal et al., Improving Erosion Resistance of Hydroturbine Steel Using Friction Stir Processing, J. Tribol. Trans., 2014, 136(4), p 04110210.1115/1.4027622 ↗
8. D.C. Wen, Improvement of Slurry Erosion Resistance of Martensite/Ferrite Duplex Stainless Steel by Hot Rolling, Metals Mater. Int., 2010, 16(1), p 13-1910.1007/s12540-010-0013-z ↗
9. L.P. Ward and A. Pilkington, The Dry Sliding Wear Behavior of HVOF-Sprayed WC: Metal Composite Coatings, J. Mater. Eng. Perform., 2014, 23(9), p 3266-327810.1007/s11665-014-1122-5 ↗
10. D.S. Wang, et al., Comparative Solid Particle Erosion Characterization of Conventional and Nanostructured Al2O3-13wt.%TiO2 Ceramic Coatings Fabricated by Plasma Spraying Process, Adv. Mater. Res., 2012, 463-464, p 359-36310.4028/www.scientific.net/AMR.463-464.359 ↗
11. S. Thiele et al., Thermophysical and Microstructural Studies on Thermally Sprayed Tungsten Carbide-Cobalt Coatings, J. Therm. Spray Technol., 2011, 20(1-2), p 358-36510.1007/s11666-010-9558-0 ↗
12. R.C. Shivamurthy et al., Influence of Microstructure on Slurry Erosive Wear Characteristics of Laser Surface Alloyed 13Cr-4Ni Steel, Wear, 2009, 267(1-4), p 204-21210.1016/j.wear.2008.12.027 ↗
13. J.F. Santa et al., Slurry and Cavitation Erosion Resistance of Thermal Spray Coatings, Wear, 2009, 267(1-4), p 160-16710.1016/j.wear.2009.01.018 ↗
14. D.K. Goyal et al., Slurry Erosion Behaviour of HVOF Sprayed WC-10Co-4Cr and Al2O3 + 13TiO2 Coatings on a Turbine Steel, Wear, 2012, 289, p 46-5710.1016/j.wear.2012.04.016 ↗
15. H.S. Grewal et al., Slurry Erosion Performance of Ni-Al2O3 Based Thermal-Sprayed Coatings: Effect of Angle of Impingement, J. Therm. Spray Technol., 2014, 23(3), p 389-40110.1007/s11666-013-0013-x ↗
16. H.S. Grewal, H. Singh, and A. Agrawal, Understanding Liquid Impingement Erosion Behaviour of Nickel-Alumina Based Thermal Spray Coatings, Wear, 2013, 301(1-2), p 424-43310.1016/j.wear.2013.01.063 ↗
17. R. Singh, S.K. Tiwari, and S.K. Mishra, Cavitation Erosion in Hydraulic Turbine Components and Mitigation by Coatings: Current Status and Future Needs, J. Mater. Eng. Perform., 2012, 21(7), p 1539-155110.1007/s11665-011-0051-9 ↗
18. B.K. Prasad et al., Effect of Sand Concentration in the Medium and Travel Distance and Speed on the Slurry Wear Response of a Zinc-Based Alloy Alumina Particle Composite, Tribol. Lett., 2004, 17(2), p 301-30910.1023/B:TRIL.0000032468.27468.2c ↗
19. A.M. Venter et al., Performance Characterization of Metallic Substrates Coated by HVOF WC-Co, Thin Solid Films, 2013, 549, p 330-33910.1016/j.tsf.2013.08.075 ↗
20. Q. Wang, Z.X. Tang, and L.M. Cha, Cavitation and Sand Slurry Erosion Resistances of WC-10Co-4Cr Coatings, J. Mater. Eng. Perform., 2015, 24(6), p 2435-244310.1007/s11665-015-1496-z ↗
21. M. Winnicki et al., The Bond Strength of Al + Al2O3 Cermet Coatings Deposited by Low-Pressure Cold Spraying, Arch. Civ. Mech. Eng., 2016, 16(4), p 743-75210.1016/j.acme.2016.04.014 ↗
22. H.X. Hu et al., Cavitation Erosion and Jet Impingement Erosion Mechanism of Cold Sprayed Ni-Al2O3 Coating, Nucl. Eng. Des., 2011, 241(12), p 4929-493710.1016/j.nucengdes.2011.09.038 ↗
23. Y. Li et al., Solid Particle Erosion Behavior of HVOF/HVAF Sprayed WC-Co-Cr Coatings, J. Eng. Tribol., 2016, 230(6), p 634-643
24. N. Ojala et al., Wear Performance of Quenched Wear Resistant Steels in Abrasive Slurry Erosion, Wear, 2016, 354-355, p 21-3110.1016/j.wear.2016.02.019 ↗