journal article·2013-02

Oxidation Resistance of Vacuum Plasma Sprayed CoNiCrAlY Coatings Modified by Filtered Cathodic Vacuum Arc Deposition Aluminizing

Jie Jiang, Huayu Zhao, Xiaming Zhou, Shunyan Tao, Chuanxian Ding

Publisher page

Abstract

The vacuum plasma sprayed CoNiCrAlY coatings are modified by filtered cathodic vacuum arc deposition aluminizing. The microstructure and oxidation resistance of the coatings are investigated. The parabolic law is obeyed for the aluminized coatings after oxidation at 1100 °C for 100 h. Its parabolic kinetic constant is 0.080 mg2/cm4 h, which is lower than that of as-sprayed coatings. The continuous and dense Al2O3 scale is formed earlier due to the increase of Al concentration, and the spinels hardly exist. The oxidation resistance is improved obviously after filtered cathodic vacuum arc deposition aluminizing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. N.P. Padture, M. Gell, and E.H. Jordan, Materials Science—Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296(5566), p 280-28410.1126/science.1068609 ↗
2. R.A. Miller, Current Status of Thermal Barrier Coatings—An Overview, Surf. Coat. Technol., 1987, 30(1), p 1-1110.1016/0257-8972(87)90003-X ↗
3. U. Schulz, C. Leyens, K. Fritscher, M. Peters, B. Saruhan-Brings, O. Lavigne, J. Dorvaux, M. Poulain, R. Mevrel, and M. Caliez, Some Recent Trends in Research and Technology of Advanced Thermal Barrier Coatings, Aero. Sci. Technol., 2003, 7(1), p 73-8010.1016/S1270-9638(02)00003-2 ↗
4. N. Czech, F. Schmitz, and W. Stamm, Microstructural Analysis of The Role of Rhenium in Advanced MCrAIY Coatings, Surf. Coat. Technol., 1995, 76/77(1), p 28-3310.1016/0257-8972(95)02546-4 ↗
5. J.W. Hutchinson and A.G. Evans, On the Delamination of the Thermal Barrier Coatings in a Thermal Gradient, Surf. Coat. Technol., 2002, 149(2-3), p 179-18410.1016/S0257-8972(01)01451-7 ↗
6. A.G. Evans, D.R. Mumm, J.W. Jutchinson, G.H. Meier, and F.S. Pettit, Mechanisms Controlling the Durability of Thermal Barrier Coatings, Prog. Mater Sci., 2001, 46(5), p 505-55310.1016/S0079-6425(00)00020-7 ↗
7. B.M. Warnes, Improved Aluminide/MCrAlX Coating Systems for Super Alloys Using CVD Low Activity Aluminizing, Surf. Coat. Technol., 2003, 163-164(30), p 106-11110.1016/S0257-8972(02)00602-3 ↗
8. X. Ren and F.H. Wang, High-Temperature Oxidation and Hot-Corrosion Behavior of a Sputtered NiCrAlY Coating with and Without Aluminizing, Surf. Coat. Technol., 2006, 201(1-2), p 30-3710.1016/j.surfcoat.2005.10.042 ↗
9. B.M. Warnes, A.L. Purvis, and J.E. Schilbe, The Manufacture and Fatigue Cracking Resistance of Grit Free Aluminide Diffusion Coatings, Surf. Coat. Technol., 2003, 163-164(30), p 100-10510.1016/S0257-8972(02)00598-4 ↗
10. J.T. Lu, S.L. Zhu, and F.H. Wang, High Temperature Corrosion Behavior of an AIP NiCoCrAlY Coating Modified by Aluminizing, Surf. Coat. Technol., 2011, 205(21-22), p 5053-505810.1016/j.surfcoat.2011.05.005 ↗
11. E.S. Tüzemen, H. Kavak, and R. Esen, Influence of Oxygen Pressure of ZnO/Glass Substrate Produced by Pulsed Filtered Cathodic Vacuum Arc Deposition, Phys. B, 2007, 390(1-2), p 366-37210.1016/j.physb.2006.08.039 ↗
12. A. Bendavid, P.J. Martin, and E.W. Preston, The Effect of Pulsed Direct Current Substrate Bias on the Properties of Titanium Dioxide Thin Films Deposited by Filtered Cathodic Vacuum Arc Deposition, Thin Solid Films, 2008, 517(2), p 494-49910.1016/j.tsf.2008.06.060 ↗
13. W.R. Chen, X. Wu, B.R. Marple, R.S. Lima, and P.C. Patnaik, Pre-oxidation and TGO Growth Behavior of an Air-Plasma-Sprayed Thermal Barrier Coating, Surf. Coat. Technol., 2008, 202(16), p 3787-379610.1016/j.surfcoat.2008.01.021 ↗
14. T.J. Nijdam, L.P.H. Jeurgens, and W.G. Sloof, Promoting Exclusive α-Al2O3 Growth upon High-Temperature Oxidation of NiCrAl Alloys: Experiment Versus Model Predictions, Acta Mater., 2005, 53(6), p 1643-165310.1016/j.actamat.2004.12.014 ↗