Investigation of Amorphous/Nanocrystalline Iron-Based Thermal Barrier Coatings
Source abstract
Abstract
Because of their favorable thermophysical properties, good machinability and low material costs, iron-based coatings which exhibit a highly amorphous/nanocrystalline microstructure are currently in the focus of research. Considering the crystallization temperature of the material, iron-based coatings might be the next generation of thermal barrier coatings (TBCs) for low-temperature systems, reducing thermal losses. The objective of this research project is the development of highly amorphous, iron-based coatings. For this purpose, amorphous feedstock materials with different chromium contents have been developed and characterized regarding their microstructures, phase compositions, crystallization temperatures and amorphous content. The results show that the amorphous content is reduced with increasing particle size and chromium content. The coatings were deposited by air plasma spraying (APS) and high-velocity oxygen fuel spraying (HVOF). It is shown that all coatings exhibit amorphous structures. HVOF coatings show a smaller amount of amorphous content compared to the feedstock materials, indicating crystallization occurring in not fully melted particles or insufficient rapid cooling. The APS process can increase the amount of amorphous content compared to the feedstock material, as shown for x Cr = 15%. All coatings proof good thermal shock behavior. Lowest thermal diffusivity values were determined for APS coatings, which confirms the potential of iron-based TBCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metallic Glasses and Amorphous Alloys · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. H. Yang, J.A. Eastman, L.J. Thompson, and G.R. Bai, Grain-Size-Dependent Thermal Transport Properties in Nanocrystalline Yttria-Stabilized Zirconia, Mater. Res. Soc., 2002, 703, p 179-184
2. P.G. Klemens and M. Gell, Thermal Conductivity of Thermal Barrier Coatings, Mater. Sci. Eng., 1993, A245, p 143-149
3. K. Bobzin, L. Zhao, M. Öte, and T.F. Linke, Deposition and Characterization of Thermal Barrier Coatings of ZrO2—4 mol.% Y2O3–1 mol.% Gd2O3–1 mol.% Yb2O3, Surf. Coat. Technol., 2015, 268, p 205-20810.1016/j.surfcoat.2014.05.051 ↗
4. K.T. Regner, D.R. Sellan, Z. Su, C.H. Amon, A.J.H. McGaughesy, and J.A. Malen, Broadband Phonon Mean Free Path Contributions to Thermal Conductivity Measured Using Frequency Domain Thermoreflectance, Commun, Nat, 2013, doi: 10.1038/ncomms263010.1038/ncomms2630 ↗
5. J.L Plawsky, Transport Phenomena Fundamentals, 3rd ed., p 95
6. K. Amiya, A. Urata, N. Nishiyama, and A. Inoue, Fe–B–Si–Nb Bulk Metallic Glasses with High Strength above 4000 MPa and Distinct Plastic Elongation, Mater. Trans., 2004, 45(4), p 1214-121810.2320/matertrans.45.1214 ↗
7. M.F. Ashby and A.L. Greer, Metallic Glasses as Structural Materials, Scr. Mater., 2006, 54, p 321-32610.1016/j.scriptamat.2005.09.051 ↗
8. C. Moreau, P. Cielo, and M. Lamontagne, Flattening and Solidification of Thermally Sprayed Particles, J. Therm. Spray Technol., 1992, 1(4), p 317-32310.1007/BF02647159 ↗
9. H. Zhang, Y. Xie, L. Huang, S. Huang, X. Zheng, and G. Chen, Effect of Feedstock Particle Size on Wear Resistance of Plasma Sprayed Fe-Based, Amorphous Coatings, Surf. Coat. Technol., 2014, 258, p 495-50210.1016/j.surfcoat.2014.08.050 ↗
10. A. Arizmendi-Morquecho, A. Campa-Castilla, C. Leyva-Porras, J.A.A. Martinez, G.V. Gutierrez, K.J.M. Bello, and L.L. Lopez, Microstructural Characterization and Wear Properties of Fe-Based Amorphous-Crystalline Coating Deposited by Twin Wire Arc Spraying, Adv. Eng. Mater., 2014. doi: 10.1155/2014/83673910.1155/2014/836739 ↗
11. Z. Zhou, L. Wang, F.C. Wang, H.F. Zhang, Y.B. Liu, and S.H. Xu, Formation and Corrosion Behavior of Fe-Based Amorphous Metallic Coatings by HVOF Thermal Spraying, Surf. Coat. Technol., 2009, 204, p 563-57010.1016/j.surfcoat.2009.08.025 ↗
12. D. Shin, F. Gitzhofer, and C. Moreau, Properties of Induction Plasma Sprayed Iron Based Nanostructured Alloy Coatings for Metal Based Thermal Barrier Coatings, J. Therm. Spray Technol., 2007, 16(1), p 118-12710.1007/s11666-006-9003-6 ↗
13. D. Shin, F. Gitzhofer, and C. Moreau, Thermal Property Evolution of Metal Based Thermal Barrier Coatings with Heat Treatments, J. Mater. Sci., 2007, 42, p 5915-592310.1007/s10853-007-1772-x ↗
14. S. Kumar, J. Kim, H. Kim, and C. Lee, Phase Dependence of Fe-Based Bulk Metallic Glasses on Properties of Thermal Spray Coatings, J. Alloy. Compd., 2009, 475(1), p L9-L1210.1016/j.jallcom.2008.07.064 ↗
15. M. Iordachescu, J. Ruiz-Hervias, D. Iordachescu, A. Valiente, and L. Caballero, Thermal Influence of Welding Process on Strength Overmatching of Thin Dissimilar Sheets Joints, Iberian Conference on Fracture and Structural Integrity, 2010
16. L. Jin, P. Li, H. Zhou, W. Zhang, G. Zhou, and C. Wang, Prog. Nat. Sci. Mater. Int., 2014, 25, p 141-14610.1016/j.pnsc.2015.03.006 ↗