journal article·2017-12

A Morphological Approach to the Modeling of the Cold Spray Process

F. Delloro, M. Jeandin, D. Jeulin, H. Proudhon, M. Faessel, L. Bianchi, E. Meillot, L. Helfen

Publisher page

Abstract

A coating buildup model was developed, the aim of which was simulating the microstructure of a tantalum coating cold sprayed onto a copper substrate. To do so, first was operated a fine characterization of the irregular tantalum powder in 3D, using x-ray microtomography and developing specific image analysis algorithms. Particles were grouped by shape in seven classes. Afterward, 3D finite element simulations of the impact of the previously observed particles were realized. To finish, a coating buildup model was developed, based on the results of finite element simulations of particle impact. In its first version, this model is limited to 2D.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Champagne V.K. (editor), et al., The Cold Spray Material Deposition Process. Woodhead Publishing Limited, Cambridge, 2010.
2. A. Vardelle, C. Moreau, J. Akedo et al., The 2016 Thermal Spray Roadmap, J. Therm. Spray Technol., 2016, 25(8), p 1376. doi: 10.1007/s11666-016-0473-x10.1007/s11666-016-0473-x ↗
3. H. Assadi, H. Kreye, F. Gartner, and T. Klassen, Cold Spraying—A Materials Perspective, Acta Mater., 2016, 116, p 382-40710.1016/j.actamat.2016.06.034 ↗
4. G. Benenati and R. Lupoi, Development of a Deposition Strategy in Cold Spray for Additive Manufacturing to Minimize Residual Stresses, Proc. CIRP, 2016, 55, p 101-10810.1016/j.procir.2016.08.042 ↗
5. Y. Cormier, P. Dupuis, B. Jodoin, and A. Corbeil, Pyramidal Fin Arrays Performance Using Streamwise Anisotropic Materials by Cold Spray Additive Manufacturing, J. Therm. Spray Technol., 2016, 25(1-2), p 170-18210.1007/s11666-015-0267-6 ↗
6. X. Wang et al., Characterization and Modeling of the Bonding Process in Cold Spray Additive Manufacturing, Addit. Manuf., 2015, 8, p 149-16210.1016/j.addma.2015.03.006 ↗
7. D. MacDonald, R. Fernández, F. Delloro et al., Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing, J. Therm. Spray Technol., 2017, 26(4), p 598-609. doi: 10.1007/s11666-016-0489-210.1007/s11666-016-0489-2 ↗
8. C. Lee and J. Kim, Microstructure of Kinetic Spray Coatings: A Review, J. Therm. Spray Technol., 2015, 24(4), p 592-60810.1007/s11666-015-0223-5 ↗
9. G. Bae et al., General Aspects of Interface Bonding in Kinetic Sprayed Coatings, Acta Mater., 2008, 56, p 4858-486810.1016/j.actamat.2008.06.003 ↗
10. M. Saleh, V. Luzin, and K. Spencer, Analysis of the Residual Stress and Bonding Mechanism in the Cold Spray Technique Using Experimental and Numerical Methods, Surf. Coat. Technol., 2014, 252, p 15-2810.1016/j.surfcoat.2014.04.059 ↗
11. A. Trinchi, Y.S. Yang, A. Tulloh et al., Copper Surface Coatings Formed by the Cold Spray Process: Simulations Based on Empirical and Phenomenological Data, J. Therm. Spray Technol., 2011, 20(5), p 986-991. doi: 10.1007/s11666-011-9613-510.1007/s11666-011-9613-5 ↗
12. http://www.cea.fr/Pages/le-cea/les-centres-cea/le-ripault.aspx .Accessed 31 May 2017 (in French)
13. O. Amsellem, K. Madi, F. Borit et al., Two-Dimensional (2D) and Three-Dimensional (3d) Analyses of Plasma-Sprayed Alumina Microstructures for Finite-Element Simulation of Young’s Modulus, J. Mater. Sci., 2008, 43(12), p 4091-4098. doi: 10.1007/s10853-007-2239-910.1007/s10853-007-2239-9 ↗
14. S. Ahmadian, A. Browning, and E.H. Jordan, Three-Dimensional X-Ray Micro-Computed Tomography of Cracks in a Furnace Cycled Air Plasma Sprayed Thermal Barrier Coating, Scr. Mater., 2015, 97, p 13-1610.1016/j.scriptamat.2014.10.026 ↗
15. M. Jeandin, H. Koivuluoto, and S. Vezzu, Chap. 4 “Coating Properties”, Modern Cold Spray, 1st ed., J. Villafuerte, Ed., Springer, Berlin, 2015,
16. G. Rolland et al., Laser-Induced Damage in Cold-Sprayed Composite Coatings, Surf. Coat. Technol., 2011, 205, p 4915-492710.1016/j.surfcoat.2011.04.103 ↗
17. O. Amsellem, F. Borit, D. Jeulin et al., Three-Dimensional Simulation of Porosity in Plasma-Sprayed Alumina Using Microtomography and Electrochemical Impedance Spectrometry for Finite Element Modeling of Properties, J. Therm. Spray Technol., 2012, 21(2), p 193. doi: 10.1007/s11666-011-9687-010.1007/s11666-011-9687-0 ↗
18. https://smil.cmm.mines-paristech.fr . Accessed 21 Dec 2016.
19. S. Beucher et al., The Watershed Transformation Applied to Image, 10th Pfefferkorn Conf. on Signal and Image Processing in Microscopy and Microanalysis, 16–19 sept. 1991, Cambridge, UK, Scanning Microscopy International, suppl. 6, 1992, p 299–314
20. Denis E. Parra, C. Barat, D. Jeulin, and C. Ducottet, 3D Complex Shape Characterization by Statistical Analysis: Application to Aluminium Alloys, Mater. Charact., 2008, 59, p 338-34310.1016/j.matchar.2007.01.012 ↗
21. L. Gillibert, C. Peyrega, D. Jeulin, V. Guipont, and M. Jeandin, 3D Multiscale Segmentation and Morphological Analysis of X-Ray Microtomography From Cold-Sprayed coatings, J. Microsc., 2012, 248(2), p 187-19910.1111/j.1365-2818.2012.03655.x ↗
22. I.T. Jolliffe, Principal Component Analysis, 2nd ed., Wiley, New York, 2002
23. B.S. Everitt, S. Landau, M. Leese, and D. Stahl, Cluster Analysis, 5th ed., Wiley, New York, 201110.1002/9780470977811 ↗
24. R. Ghelici, S. Bagherifard, M. Guagliano, and M. Verani, Numerical Simulation of Cold Spray Coating, Surf. Coat. Technol., 2011, 205, p 5294-530110.1016/j.surfcoat.2011.05.038 ↗
25. W.Y. Li, C.J. Li, and H. Liao, in Modeling Aspects of High Velocity Impact of Particles in Cold Spraying by Explicit Finite Elements Analysis. Proceedings of the International Thermal Spray Conference, 2009, pp. 432-44110.31399/asm.cp.itsc2009p0432 ↗
26. T. Antoun et al., Spall Fracture, Springer, New York, 2003
27. S.R. Chen and G.T. Gray, Constitutive Behaviour of Tantalum and Tantalum-Tungsten Alloys, Metall. Mater. Trans. A, 1996, 27(10), p 2994-300610.1007/BF02663849 ↗
28. S. Rahmati and A. Ghaei, The Use of Particle/Substrate Material Models in Simulation of Cold-Gasdynamic-Spray Process, J. Therm. Spray Technol., 2014, 23(3), p 530-54010.1007/s11666-013-0051-4 ↗
29. G.R. Johnson and W.H. Cook, in A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates, and High Temperatures. Proceedings of the 7th International Symposium on Ballistics, 1983, pp. 541-547
30. R. Clift, J.R. Grace, and M.E. Weber, Bubbles, Drops, and Particles, Academic Press, New York, 1978
31. ABAQUS Documentation, Dassault Systèmes, Providence, RI, USA, 2015.
32. B. Yildirim, S. Müftü, and A. Gouldstone, Modeling of High Velocity Impact of Spherical Particles, Wear, 2011, 270(9–10), p 703-71310.1016/j.wear.2011.02.003 ↗
33. S. Yin, P. He, H. Liao, and X. Wang, Deposition Features of Ti Coating Using Irregular Powders in Cold Spray, J. Therm. Spray Technol., 2014, 23(6), p 98410.1007/s11666-014-0116-z ↗
34. Q. Blochet et al, in Influence of Spray Angle on Cold Spray with Al for the Repair of Aircraft Components. Thermal Spray 2014: Proceedings of the International Thermal Spray Conference, Barcelona, Spain.10.31399/asm.cp.itsc2014p0069 ↗
35. S. van der Walt, S.C. Colbert, and G. Varoquaux, The NumPy Array: A Structure for Efficient Numerical Computation, Comput. Sci. Eng., 2011, 13, p 22-30. doi: 10.1109/MCSE.2011.3710.1109/MCSE.2011.37 ↗
36. E. Jones, E. Oliphant, P. Peterson et al., SciPy: Open Source Scientific Tools for Python, 2001, http://www.scipy.org . Accessed 21 Dec 2016.
37. P.J. Ryan, Euclidean and Non-Euclidean Geometry, International Student Edition, Cambridge University Press, 2009.