journal article·2011-06

Identification of Desirable Precursor Properties for Solution Precursor Plasma Spray

Chigozie K. Muoto, Eric H. Jordan, Maurice Gell, Mark Aindow

Publisher page

Abstract

In solution precursor plasma spray chemical precursor solutions are injected into a standard plasma torch and the final material is formed and deposited in a single step. This process has several attractive features, including the ability to rapidly explore new compositions and to form amorphous and metastable phases from molecularly mixed precursors. Challenges include: (a) moderate deposition rates due to the need to evaporate the precursor solvent, (b) dealing on a case by case basis with precursor characteristics that influence the spray process (viscosity, endothermic and exothermic reactions, the sequence of physical states through which the precursor passes before attaining the final state, etc.). Desirable precursor properties were identified by comparing an effective precursor for yttria-stabilized zirconia with four less effective candidate precursors for MgO:Y2O3. The critical parameters identified were a lack of major endothermic events during precursor decomposition and highly dense resultant particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Catalytic Processes in Materials Science · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. P. Fauchais, A. Vardelle, and B. Dussoubs, Quo Vadis Thermal Spraying?, J. Therm. Spray Technol., 2001, 10, p 44-6610.1361/105996301770349510 ↗
2. R.A. Miller, Current Status of Thermal Barrier Coatings—An Overview, Surf. Coat. Technol., 1987, 30, p 1-1110.1016/0257-8972(87)90003-X ↗
3. S.M. Meier, D.K. Gupta, and K.D. Sheffler, Ceramic Thermal Barrier Coatings for Commercial Gas Turbine Engines, JOM, 1991, 43, p 50-5310.1007/BF03220164 ↗
4. M. Gell, E.H. Jordan, M. Teicholz, B.M. Cetegen, N.P. Padture, L. Xie, D. Chen, X. Ma, and J. Roth, Thermal Barrier Coatings Made by the Solution Precursor Plasma Spray Process, J. Therm. Spray Technol., 2008, 17, p 124-13510.1007/s11666-007-9141-5 ↗
5. J. Karthikeyan, C.C. Berndt, S. Reddy, J.-Y. Wang, A.H. King, and H. Herman, Nanomaterial Deposits Formed by DC Plasma Spraying of Liquid Feedstocks, J. Am. Ceram. Soc., 1998, 81, p 121-12810.1111/j.1151-2916.1998.tb02303.x ↗
6. P.R. Strutt, B.H. Kear, and R. Boland, US Patent no. 6,025,034, 2000
7. L.L. Shaw, D. Goberman, R. Ren, M. Gell, S. Jiang, Y. Wang et al., The Dependency of Microstructure and Properties of Nanostructured Coatings on Plasma Spray Conditions, Surf. Coat. Technol., 2000, 130, p 1-810.1016/S0257-8972(00)00673-3 ↗
8. H. Chen, S.W. Lee, C.H. Choi, B.Y. Hur, Y. Zeng, X.B. Zheng, and C.X. Ding, Plasma Sprayed Nanostrucutred Zirconia Coatings Deposited from Different Powders with Nano-Scale Substructure, J. Mater. Sci., 2004, 39, p 4701-470310.1023/B:JMSC.0000034175.48128.be ↗
9. O. Tingaud, A. Grimaud, A. Denoirjean, G. Montavon, V. Rat, J.F. Coudert, P. Fauchais, and T. Chartier, Suspension Plasma-Sprayed Alumina Coating Structures: Operating Parameters Versus Coating Architecture, J. Therm. Spray Technol., 2008, 17, p 662-67010.1007/s11666-008-9218-9 ↗
10. L. Xie, X. Ma, E.H. Jordan, N.P. Padture, D.T. Xiao, and M. Gell, Deposition of Thermal Barrier Coatings Using the Solution Precursor Plasma Spray Process, J. Mater. Sci., 2004, 39, p 1639-164610.1023/B:JMSC.0000016163.81534.19 ↗
11. N.P. Padture, K.W. Schlichting, T. Bhatia, A. Ozturk, B. Cetegen, E.H. Jordan, M. Gell, S. Jiang, T.D. Xiao, P.R. Strutt, E. García, P. Miranzo, and M.I. Osendi, Towards Durable Thermal Barrier Coatings with Novel Microstructures Deposited by Solution Precursor Plasma Spray, Acta Mater., 2001, 49, p 2251-225710.1016/S1359-6454(01)00130-6 ↗
12. A.D. Jadhav and N.P. Padture, Mechanical Properties of Solution-Precursor Plasma-Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 2008, 202, p 4976-497910.1016/j.surfcoat.2008.04.091 ↗
13. A. Ozturk and B.M. Cetegen, Modeling of Plasma Assisted Formation of Precipitates in Zirconium Containing Liquid Precursor Droplets, Mater. Sci. Eng. A, 2004, 384, p 331-35110.1016/j.msea.2004.06.042 ↗
14. E.H. Jordan, L. Xie, X. Ma, M. Gell, N.P. Padture, B. Cetegen et al., Superior Thermal Barrier Coatings Using Solution Precursor Plasma Spray, J. Therm. Spray Technol., 2004, 13, p 57-6510.1007/s11666-004-0050-6 ↗
15. M. Gell, L. Xie, X. Ma, E.H. Jordan, and N.P. Padture, Highly Durable Thermal Barrier Coatings Made by the Solution Precursor Plasma Spray Process, Surf. Coat. Technol., 2004, 177, p 97-10210.1016/j.surfcoat.2003.06.023 ↗
16. M. Gell, L. Xie, E.H. Jordan, and N.P. Padture, Mechanisms of Spallation of Solution Precursor Plasma Spray Thermal Barrier Coatings, Surf. Coat. Technol., 2004, 188, p 101-10610.1016/j.surfcoat.2004.08.004 ↗
17. L. Xie, D. Chen, E.H. Jordan, A. Ozturk, F. Wu, X. Ma, B.M. Cetegen, and M. Gell, Formation of Vertical Cracks in Solution-Precursor Plasma-Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 2006, 201, p 1058-106410.1016/j.surfcoat.2006.01.020 ↗
18. A.D. Jadhav, N.P. Padture, E.H. Jordan, M. Gell, P. Miranzo, and E.R. Fuller, Low-Thermal-Conductivity Plasma-Sprayed Thermal Barrier Coatings with Engineered Microstructures, Acta Mater., 2006, 54, p 3343-334910.1016/j.actamat.2006.03.024 ↗
19. A.D. Jadhav, N.P. Padture, F. Wu, E.H. Jordan, and M. Gell, Thick Ceramic Thermal Barrier Coatings with High Durability Deposited Using Solution-Precursor Plasma Spray, Mater. Sci. Eng. A, 2005, 405, p 313-32010.1016/j.msea.2005.06.023 ↗
20. T.W. Coyle and Y. Wang, Solution Precursor Plasma Spray of Nickel-Yittia Stabilized Zirconia Anodes for Solid Oxide Fuel Cell Application, J. Therm. Spray Technol., 2007, 16, p 898-90410.1007/s11666-007-9108-6 ↗
21. A.L. Vasiliev, N.P. Padture, and X. Ma, Coatings of Metastable Ceramics Deposited by Solution-Precursor Plasma Spray: I. Binary ZrO2-Al2O3 System, Acta Mater., 2006, 54, p 4913-492010.1016/j.actamat.2006.06.025 ↗
22. A.L. Vasiliev and N.P. Padture, Coatings of Metastable Ceramics Deposited by Solution-Precursor Plasma Spray: II. Ternary ZrO2-Y2O3-Al2O3 System, Acta Mater., 2006, 54, p 4921-492810.1016/j.actamat.2006.06.026 ↗
23. T. Bhatia, A. Ozturk, L. Xie, E.H. Jordan, B.M. Cetegen, M. Gell, X. Ma, and N.P. Padture, Mechanisms of Ceramic Coating Deposition in Solution-Precursor Plasma Spray, J. Mater. Res., 2002, 17, p 2363-237210.1557/JMR.2002.0346 ↗
24. C.K. Muoto, E.H. Jordan, M. Gell, and M. Aindow, Effects of Precursor Chemistry on the Structural Characteristics of Sol-Gel/Combustion Synthesized Y2O3-MgO Nano-Composites, J. Am. Ceram. Soc., 2011, 94, p 372-38110.1111/j.1551-2916.2010.04078.x ↗
25. P. Fauchais, Understanding Plasma Spraying, J. Phys. D Appl. Phys., 2004, 37, p R86-R10810.1088/0022-3727/37/9/R02 ↗
26. C.K. Muoto, E.H. Jordan, M. Gell, and M. Aindow, Phase Homogeneity in Sol-Gel/Combustion Synthesized MgO-ZrO2 Nano Composites, J. Am. Ceram. Soc., 2010, 93, p 3102-310910.1111/j.1551-2916.2010.03821.x ↗
27. O. Unal, T.E. Mitchell, and A.H. Heuer, Microstructures of Y2O3-Stabilized ZrO2 Electron Beam-Physical Vapor Deposition Coatings on Ni-Base Superalloys, J. Am. Ceram. Soc., 1994, 77, p 984-99210.1111/j.1151-2916.1994.tb07256.x ↗
28. U. Schulz, H. Oettel, and W. Bunk, Texture of EB-PVD Thermal Barrier Coatings Under Variable Deposition Conditions, Z. Metallkd., 1996, 87, p 488-492
29. D.D. Hass, A.J. Slifka, and H.N.G. Wadley, Low Thermal Conductivity Vapor Deposited Zirconia Microstructures, Acta Mater., 2001, 49, p 973-98310.1016/S1359-6454(00)00403-1 ↗
30. A. Bacciochini, G. Montavon, J. Ilavsky, A. Denoirjean, and P. Fauchais, Porous Architecture of SPS Thick YSZ Coatings Structured at the Nanometer Scale, J. Therm. Spray Technol., 2010, 19, p 198-20610.1007/s11666-009-9429-8 ↗
31. D. Chen, E.H. Jordan, and M. Gell, Effect of Solution Concentration on Splat Formation and Coating Microstructure Using the Solution Precursor Plasma Spray Process, Surf. Coat. Technol., 2008, 202, p 2132-213810.1016/j.surfcoat.2007.08.077 ↗
32. X. Chen, Evaporation Kinetics and Thermophoresis of Particles, Encyclopedia of Surface & Colloid Science, P. Somasendaran, and A. Hubbard, Eds., Taylor & Francis Group, New York, 2006, p 2511.
33. W.A. Sirignano, Fluid Dynamics and Transport of Droplets and Sprays, Cambridge University Press, Cambridge, 199910.1017/CBO9780511529566 ↗
34. M.C. Mayoral, J.M. Andres, M.T. Bona, V. Higuera, and F.J. Belzunce, Yittria Stabilized Zirconia Corrosion Destabilization Followed by Raman Mapping, Surf. Coat. Technol., 2008, 202, p 5210-521610.1016/j.surfcoat.2008.06.050 ↗
35. R. Rampon, O. Marchand, C. Filiatre, and G. Bertrand, Influence of Suspension Characteristic on Coatings Microstructure Obtained by Suspension Plasma Spray, Surf. Coat. Technol., 2008, 202, p 4337-434210.1016/j.surfcoat.2008.04.006 ↗