journal article·2013-02Open access

Liquid-Solid Self-Lubricated Coatings

S. Armada, R. Schmid, S. Equey, I. Fagoaga, N. Espallargas

Abstract

Self-lubricated coatings have been a major topic of interest in thermal spray in the last decades. Self-lubricated coatings obtained by thermal spray are exclusively based on solid lubricants (PTFE, h-BN, graphite, MoS2, etc.) embedded in the matrix. Production of thermal spray coatings containing liquid lubricants has not yet been achieved because of the complexity of keeping a liquid in a solid matrix during the spraying process. In the present article, the first liquid-solid self-lubricating thermal spray coatings are presented. The coatings are produced by inserting lubricant-filled capsules inside a polymeric matrix. The goal of the coating is to release lubricant to the system when needed. The first produced coatings consisted solely of capsules for confirming the feasibility of the process. For obtaining such a coating, the liquid-filled capsules were injected in the thermal spray flame without any other feedstock material. Once the concept and the idea were proven, a polymer was co-sprayed together with the capsules to obtain a coating containing the lubricant-filled capsules distributed in the solid polymeric matrix. The coatings and the self-lubricated properties have been investigated by means of optical microscopy, Scanning Electron Microscopy, and tribological tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer composites and self-healing · Tribology and Wear Analysis · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. S.R. White, N.R. Sottos, P.H. Geubelle, J.S. Moore, M.R. Kessler, S.R. Sriram, E.N. Brown, and S. Viswanathan, Autonomic Healing of Polymer Composites, Nature, 2001, 409, p 794-79710.1038/35057232 ↗
2. R.P. Wool, Self healing Materials: A Review, Soft Matter, 2008, 4, p 400-41810.1039/b711716g ↗
3. M.R. Kessler, Self-Healing: A New Paradigm in Materials Design, Proc. Inst. Mech. Eng. G. J. Aerosp. Eng., 2007, 221(4), p 479-49510.1243/09544100JAERO172 ↗
4. A.E. Hughes, I.S. Cole, T.H. Muster, and R.J. Varley, Designing Green, Self-Healing Coatings for Metal Protection, NPG Asia Mater., 2010, 2, p 143-15110.1038/asiamat.2010.136 ↗
5. B.E. Koene, S. Own, and R.S. Taushanoff, Self Healing Superhydrophobic coatings for corrosion protection, Department of Defense Corrosion Conference August 10-14, 2009
6. A. Kumar, L.D. Stephenson, and J.N. Murray, Self Healing Coatings for Steel, Prog. Org. Coat., 2006, 55, p 244-25310.1016/j.porgcoat.2005.11.010 ↗
7. S.D. Siegmann, O.C. Brandt, and N.M. Margadan, Tribological Requirements of Thermally Sprayed Coatings for Wear Resistant Applications. Proc. 1st International Thermal Spray Conference—Thermal Spray: Surface Engineering via Applied Research, 2000, p 1135-114010.31399/asm.cp.itsc2000p1135 ↗
8. M. Erne, D. Kolar, C. Hübsch, M. Möhwald, and F.-W. Bach, Synthesis of Tribologically Favorable Coatings for Hot Extrusion Tools by Suspension Plasma Spraying, J. Thermal Spray Technol., 2012, 21(3-4), p 668-67510.1007/s11666-012-9765-y ↗
9. Maintenance and OSH—A statistical picture. Report from the European Agency for Saftety and Health at Work. http://osha.europa.eu/en/publications/factsheets/90
10. J. Ugelstad, M.S. El-Aasser, and J.W. Vanderhoff, Emulsion polymerization: Initiation of polymerization in monomer droplets, J. Polym. Sci. C Polym. Lett., 1973, 11(8), p 503-51310.1002/pol.1973.130110803 ↗
11. M. El-Aasser and D. Sudol, Miniemulsions: Overview of Research and Applications, JCT Res., 2004, 1, p 21-31
12. J.M. Asua, Miniemulsion Polymerization, Prog. Polym. Sci., 2002, 27, p 1283-134610.1016/S0079-6700(02)00010-2 ↗
13. K. Landfester, Synthesis of colloidal particles in miniemulsions, Annu. Rev. Mater. Res., 2006, 36, p 231-27910.1146/annurev.matsci.36.032905.091025 ↗
14. M.L. Zheludkevich, D.G. Shchukin, K.A. Yasakau, H. Möhwald, and M.G.S. Ferreira, Active Corrosion Protection Based on Nanocontainers with Corrosion Inhibitors, Chem. Mater., 2006, 19, p 402-41110.1021/cm062066k ↗