Evaluation of the Flexural Rigidity of Sandwich Structures Using Experimentally Obtained Mechanical Properties of the Constituents
Source abstract
Abstract
Prediction of mechanical performance of sandwich constructions is a difficult task due to the complex nonlinear and inelastic behavior of the constituent materials. This study tries to utilize an analytical model to estimate the mechanical performance of sandwich structure based on the mechanical properties of the constituents. To this end, the mechanical properties of the core and skin materials were examined separately. The mechanical behavior and deformation mechanism of Ni alloy foam structures have been studied using uniaxial compression testing. The mechanical properties of alloy 625 coating were determined using tensile testing. The flexural rigidity of sandwich structures were calculated using experimentally obtained elastic moduli of the alloy 625 coating and Ni alloy foam. The model was also used to calculate the flexural rigidity of sandwich samples with different skin thicknesses. This study also investigates the effect of post fabrication heat treatment on the mechanical performance of the sandwich structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. D.J. Sypeck, Wrought Aluminum Truss Core Sandwich Structures, Metallurgical and Materials Transactions B, 2005, 36B, p 125-13110.1007/s11663-005-0012-5 ↗
2. H.N.G. Wadley, N.A. Fleck, and A.G. Evans, Fabrication and Structural Performance of Periodic Cellular Metal Sandwich Structures, Compos. Sci. Technol., 2003, 63, p 2331-234310.1016/S0266-3538(03)00266-5 ↗
3. T. Bitzer, Honeycomb Technology, Chapman & Hall, 199710.1007/978-94-011-5856-5 ↗
4. M.J. Wahll, Handbook of Superalloys, International Alloy Compositions and Designations Series, Battelle Press, 197910.21236/ADA065740 ↗
5. M.F. Singleton, J.L. Murray, and P. Nash, Phase Diagrams of Binary Nickel Alloys, ASM International, Materials Park, OH, USA, 1991
6. F. Azarmi, T.W. Coyle, and J. Mostaghimi, Flexural Properties of Sandwich Beams Consisting of Air Plasma Sprayed Alloy 625 and Nickel Alloy Foam, J. Mater. Sci., 2009, 44, p 2836-284310.1007/s10853-009-3375-1 ↗
7. M.F. Ashby, Materials Selection in Mechanical Design, 3rd ed., Elsevier, Butterworth-Heinemann, Oxford, UK, 2005, p 359-367
8. F. Azarmi, T.W. Coyle, and J. Mostaghimi, Optimization of Atmospheric Plasma Spray Process Parameters using a Design of Experiment for Alloy 625 Coatings, J. Therm. Spray Technnol., 2008, 17(1), p 144-15510.1007/s11666-007-9142-4 ↗
9. Test Method for Tension Testing of Metallic Materials [Metric], Annual Book of ASTM Standards, E 8 M-04, 03.01, ASTM 1997
10. H.R.S. Jazi, T.W. Coyle, and J. Mostaghimi, Understanding Grain Growth and Pore Elimination in Vacuum-Plasma-Sprayed Titanium Alloy, Metall. Mater. Trans. A, 2007, 38(A), p 476-48410.1007/s11661-006-9075-4 ↗
11. G. Caprino and R. Teti, Sandwich Structures: Handbook, II Prato, Padua, Italy, 1989
12. J.R. Vinson, The Behavior of Sandwich Structures of Isotropic and Composite Materials, Technomic Publishing Company, Lancaster, PA, USA, 1999
13. T.M. McCormack, R. Miller, O. Kesler, and L.J. Gibson, Failure of Sandwich Beams with Metallic Foam Cores, Int. J. Solids Struct., 2001, 38, p 4901-492010.1016/S0020-7683(00)00327-9 ↗
14. H. Allen, Analysis and Design of Structural Sandwich Panels, Oxford Pergamon Press, Oxford, UK, 1969
15. Standard Test Method for Flexural Properties of Sandwich Constructions, Annual Book of ASTM Standards, C 393-00, 03.01, ASTM 2000
16. J. Kovacik and F. Simancik, Metal Foams and Porous Metal Structures, J. Banhart, M.F. Ashby, and N.A. Fleck, Ed., MIT Verlag, Bremen, Germany, 1999, p 303-305
17. T.G. Nieh, K. Higashi, and J. Wadsworth, Effect of Cell Morphology on the Compressive Properties of Open-cell Aluminum Foams, Mater. Sci. Eng. A, 2000, 283, p 105-11010.1016/S0921-5093(00)00623-7 ↗
18. L.J. Gibson, Mechanical Behavior of Metallic Foams, Annu. Rev. Mater. Sci., 2000, 30, p 191-22710.1146/annurev.matsci.30.1.191 ↗
19. J.A.E. Bell, Properties of Nickel Aluminide Foams, 45th International SAMPE Symposium, May 21-25, 2000 (Long Beach, California, USA), 2000, p 607-617
20. E.A. Brandes and G.B. Brook, Smithells Metals Reference Book, 7th ed., Butterworth-Heinemann Ltd, Oxford, UK, 1992
21. F. Azarmi, J. Saaedi, T.W. Coyle, and J. Mostaghimi, Microstructure Characterization of Alloy 625 Deposited on Nickel Foam Using Air Plasma Spraying, Adv. Eng. Mater., 2008, 10(5), p 459-46510.1002/adem.200700196 ↗
22. A.A. Kulkarni, S. Sampath, A. Goland, and H. Herman, Porosity-Thermal Conductivity Relationships in Plasma Sprayed Zirconia Coatings, Thermal Spray: Surface Engineering via Applied Research, C.C. Berndt, Ed., May 8-11, 2000 (Montreal, QC, Canada), ASM International, 2000, p 1061-106610.31399/asm.cp.itsc2000p1061 ↗
23. F. Azarmi, T. Coyle, and J. Mostaghimi, Young’s Modulus Measurement and Study of the Relationship Between Mechanical Properties and Microstructure of Air Plasma Sprayed Alloy 625, Surf. Coat. Technol., 2009, 203, p 1045-105410.1016/j.surfcoat.2008.09.035 ↗