Feedback control of HVOF thermal spray process accounting for powder size distribution
Source abstract
Abstract
This work presents a novel formulation of the control problem and a feedback control system for the high velocity oxygen-fuel (HVOF) thermal spray process, which explicitly accounts for the effect of powder size distribution. Initially, based on model predictions and available experimental data, the control problem is formulated as one of regulating appropriate averages (with respect to the particle volume distribution) of the temperature and velocity of the particles at the point of impact on substrate (these are the variables that directly influence coating microstructure and porosity, which, in turn, determine coating mechanical and thermal properties) by manipulating the oxygen/fuel ratio and the combustion chamber pressure, respectively. Then, a feedback control system is developed and applied to a detailed mathematical model of the process. Closed-loop simulations show that the average particle velocity and temperature at the point of impact on substrate reach the desired values in a short time, which validates the feasibility of real-time implementation of feedback control on HVOF thermal spray systems. It is also shown that the proposed formulation of the control problem (which accounts for the effect of powder size distribution) leads to a solution of the control problem that is superior (with respect to the achievement of the desired control objectives) to a solution that assumes a monodisperse powder size distribution. Finally, the proposed control problem formulation and the feedback control system are shown to be robust with respect to disturbances in spray distance and particle injection velocity, and variations in powder size distribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. M.L. Lau, H.G. Jiang, W. Nuchter, and E.J. Lavernia: “Thermal spraying of nanocrystalline Ni coatings,” Phys. Status Solidi A, 1998, 166, pp. 257–68.10.1002/(SICI)1521-396X(199803)166:1<257::AID-PSSA257>3.0.CO;2-J ↗
2. D. Cheng, G. Trapaga, J.W. McKelliget, and E. J. Lavernia: “Mathematical Modeling of High Velocity Oxygen Fuel Thermal Spraying: An Overview,” Key Eng. Mater., 2001, 197, pp. 1–25.10.4028/www.scientific.net/KEM.197.1 ↗
3. V.L. Tellkamp, M.L. Lau, A. Fabel, and E.J. Lavernia: “Thermal Spraying of Nanocrystalline Inconel 718,” Nanostruct. Mater., 1997, 9(1–8), pp. 489–92.10.1016/S0965-9773(97)00107-4 ↗
4. G.D. Power, T.J. Barber, and L.M. Chiappetta: “Analysis of a High Velocity Oxygen-fuel (HVOF) Thermal Torch” in 28th AIAA/SAE/ASME/ASEE Joint Propulsion Conference and Exhibit, AIAA92-3598, Nashville, Tennessee, 1992.10.2514/6.1992-3598 ↗
5. X. Yang and S. Eidelman: “Numerical Analysis of a High-Velocity Oxygen-fuel Thermal Spray System,” J. Therm. Spray Technol., 1996, 5(2), pp. 175–84.10.1007/BF02646431 ↗
6. B. Hassan, A.R. Lopez, and W.L. Oberkampf: “Computational Analysis of a Three-Dimensional High-Velocity Oxygen Fuel (HVOF) Thermal Spray Torch,” J. Therm. Spray Technol., 1998, 7(1), pp. 71–77.10.1007/s11666-006-5006-6 ↗
7. G.-X. Wang, V. Prasad, and S. Sampath: “Rapid Solidification in Thermal Spray Deposition: Microstructure and Modelling” in Sadhana, 2001, 26, pp. 35–57.10.1007/BF02728478 ↗
8. V. Gourlaouen, E. Verna, and P. Beaubien: “Influence of Flame Parameters on Stainless Steel Coatings Properties” in Thermal Spray: Surface Engineering via Applied Research, Proceedings of the International Thermal Spray Conference, C.C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH, 2000, Montreal, QC. Canada, pp. 487–93.
9. A.V. Zagorski and F. Stadelmaier: “Full-scale Modelling of a Thermal Spray Process,” Surf. Coat. Technol., 2001, 146–147, pp. 162–67.10.1016/S0257-8972(01)01372-X ↗
10. S. Annavarapu, D. Apelian, and A. Lawley: “Spray Casting of Steel Strip: Process Analysis,” Metall. Trans. A., 1990, 21, pp. 3237–56.10.1007/BF02647318 ↗
11. P. Marthur, S. Annavarapu, D. Apelian, and A. Lawley: “Spray Casting: An Integral Model for Process Understanding and Control,” Mater. Sci. Eng. A, 1991, 142, pp. 261–76.10.1016/0921-5093(91)90665-A ↗
12. J.R. Fincke, W.D. Swank, R.L. Bewley, D.C. Haggard, M. Gevelbar, and D. Wroblewski: “Diagnostics and Control in the Thermal Spray Process,” Surf. Coat. Technol., 2001, 146–147, pp. 537–43.10.1016/S0257-8972(01)01432-3 ↗
13. C. Moreau and L. Leblanc: “Optimization and Process Control for High Performance Thermal Spray Coatings,” Key Eng. Mater., 2001, 197, pp. 27–57.10.4028/www.scientific.net/KEM.197.27 ↗
14. W.D. Swank, J.R. Fincke, and D.C. Haggard: “A Particle Temperature Sensor for Monitoring and Control of the Thermal Spray Process” in Proc. 8th Natl. Thermal Spray Conf., C.C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH 1995, pp. 111–16.
15. J.A. Roberson and C.T. Crowe: Engineering Fluid Dynamics, John Wiley & Sons, New York, 1997.
16. W.D. Swank, J.R. Fincke, D.C. Haggard, and G. Irons: “HVOF Gas Flow Field Characteristics” in Proc. 7th Natl. Thermal Spray Conf., C.C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH 1994, pp. 313–18.
17. S. Gordon and B.J. McBride: “Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications,” NASA Reference Publication 1311, Lewis Research Center, Cleveland, OH, 1994.
18. H.H. Tawfik and F. Zimmerman: “Mathematical Modeling of the Gas and Powder Flow in HVOF Systems,” J. Therm. Spray Technol., 1997, 6(3), pp. 345–52.10.1007/s11666-997-0069-6 ↗
19. L. Pawlowski: The Science and Engineering of Thermal Spray Coatings, John Wiley & Sons, Chichester, UK, 1995.
20. D. Cheng, Q. Xu, G. Trapaga, and E.J. Lavernia: “The Effect of Particle Size and Morphology on the In-flight Behavior of Particles During High-Velocity Oxyfuel Thermal Spraying,” Metall. Mater. Trans. B, 2001, 32(3), pp. 525–35.10.1007/s11663-001-0037-3 ↗
21. G.H. Ganser: “A Rational Approach to Drag Prediction of Spherical and Nonspherical Particles,” Powder Technol., 1993, 77, pp. 143–52.10.1016/0032-5910(93)80051-B ↗
22. C.J. Geankoplis, Transport Processes and Unit Operations, Prentice-Hall, NJ, 1993.
23. R.B. Bird, W.E. Stewart, and E.N. Lightfoot: Transport Phenomena, John Wiley & Sons, New York, 1960.
24. C.T. Crowe and D.E. Stock: “A Computer Solution for Two-dimensional Fluid-particle Flows,” Int. J. Numerical Meth. Eng., 1976, 10, pp. 185–96.10.1002/nme.1620100114 ↗
25. T.C. Hanson, C.M. Hackett, and G.S. Settles: “Independent Control of HVOF Particle Velocity and Temperature,” J. Therm. Spray Technol., 2002, II(1), pp. 75–85.10.1361/105996302770349005 ↗
26. W.D. Swank, J.R. Fincke, D.C. Haggard, and G. Irons: “HVOF Particle Flow Field Characteristics” in Proc. 7th Natl. Thermal Spray Conf., C. C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH, 1994, pp. 319–24.
27. R. Lima, A. Kucuk, and C.C. Berndt: “Integrity of Nanostructured Partially Stabilized Zirconia after Plasma Spray Processing,” Mater. Sci. Eng. A, 2001, 313, pp. 75–82.10.1016/S0921-5093(01)01146-7 ↗
28. E.J. Lavernia and Y. Wu: Spray Atomization and Deposition, John Wiley & Sons, Chichester, England, 1996.
29. E.L. Crow and K. Shimizu, Lognormal Distributions: Theory and Applications, Marcel Dekker, New York, 1988.
30. M. Li and P.D. Christofides: “Modeling and Analysis of HVOF Thermal Spray Process Accounting for Powder Size Distribution,” Chem. Eng. Sci., 2003, 58, pp. 849–57.10.1016/S0009-2509(02)00616-4 ↗
31. J.R. Fincke, W.D. Swank, and C.L. Jeffrey: “Simultaneous Measurement of Particle Size, Velocity and Temperature in Thermal Plasmas,” IEEE Trans. Plasma Sci., 1990, 18(6), pp. 948–57.10.1109/27.61509 ↗
32. R. Knight, R.W. Smith, and Z. Xiao: “Particle Velocity Measurements in HVOF and APS Systems” in Proc. 7th Natl. Thermal Spray Conf., C.C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH, 1994, pp. 331–36.
33. I. Thomson, V. Pershin, J. Mostaghimi, and S. Chandra: “Experimental Testing of a Curvilinear Gas Shroud Nozzle for Improved Plasma Spraying,” Plasma Chem. Plasma Proc., 2001, 21(1), pp. 65–82.10.1023/A:1007041428743 ↗
34. J.R. Fincke, D.C. Haggard, and W.D. Swank: “Particle Temperature Measurement in the Thermal Spray Process,” J. Therm. Spray Technol., 2001, 10, pp. 255–66.10.1361/105996301770349358 ↗
35. T. Chiu and P.D. Christofides: “Nonlinear Control of Particulate Processes,” AIChE J., 1999, 45, pp. 1279–97.10.1002/aic.690450613 ↗
36. A. Kalani and P.D. Christofides: “Nonlinear Control of Spatially-Inhomogeneous Aerosol Processes,” Chem. Eng. Sci., 1999, 54, pp. 2669–78.10.1016/S0009-2509(98)00315-7 ↗
37. P.D. Christofides: Model-Based Control of Particulate Processes, Particle Technology Series, Kluwer Academic Publishers. The Netherlands, 2002.10.1007/978-94-015-9882-8 ↗
38. T. Chui and P.D. Christofides: “Robust Control of Particulate Processes Using Uncertain Population Balances,” AICHE J., 2000, 46, pp. 266–80.10.1002/aic.690460207 ↗
39. N.H. El-Farra, T. Chiu, and P.D. Christofides: “Analysis and Control of Particulate Processes With Input Constraints,” AICHE J., 2001, 47, pp. 1849–65.10.1002/aic.690470815 ↗