Influence of Handling Parameters on Coating Characteristics in Order to Produce Near-Net-Shape Wear Resistant Coatings
Source abstract
Abstract
Abstract The present study investigates the influence of spray torch handling parameters such as the spray angle, spray distance, track pitch, and gun velocity on the deposition rate and the deposition quality of Atmospheric Plasma Sprayed WC-12Co coatings as well as Twin Wire Arc Sprayed WSC-Fe coatings. Based on results of light microscopical analysis similarities as well as fundamental differences in the sensitivity of the two spray processes, regarding changes in handling parameters, are discussed. Both coating systems show distinct changes of the deposition rate when varying the handling parameters. An empirical model could be determined to describe the coating deposition. This model enables an optimization of path planning processes by reducing the number of optimization loops. However, the coatings show visible changes in the microstructure, which have to be taken into consideration in order to guarantee the production of high quality coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. M. Kanouff, R. Neiser, and T. Roemer, Surface Roughness of Thermal Spray Coatings Made with Off-Normal Spray Angles, J. Therm. Spray Technol., 1998, 7(2), p 219-22810.1361/105996398770350963 ↗
2. W. Tillmann, 3D-Surface Engineering of Tools for Sheet Metal Forming—Manufacturing, Modelling, Machining, Report 2008, Praxiswissen, 2008 (in German)
3. W. Tillmann, Sonderforschungsbereich 708, 3D-Surface Engineering für Werkzeugsysteme der Blechformteilefertigung -Erzeugung, Modellierung, Bearbeitung-, 3D-Surface Engineering of Tools for Sheet Metal Forming—Manufacturing, Modelling, Machining, Report 2009, Praxiswissen, 2009 (in German)
4. W. Tillmann, E. Vogli, and B. Krebs, Surface Engineering von atmosphärisch plasma-gespritzten WC-12Co Schichten, SFB 708—3rd Public Colloquium, 2009 (Dortmund), Praxiswissen (3D-Surface Engineering für Werkzeugsysteme der Blechformteilefertigung, Vol. 3), p 7-15 (in German)
5. G. Wozniak, Zerstäubungstechnik: Prinzipien, Verfahren, Geräte, Springer Verlag, Berlin, 2002, p 109-111 (in German)10.1007/978-3-642-55835-1 ↗
6. W. Tillmann, E. Vogli, and B. Krebs, Investigation of Atmospheric Plasma Sprayed Tungsten Carbide Cobalt Coatings Using Statistical Design of Experiments, Proceedings of ITSC International Thermal Spray Conference, May 3-5, 2010, Thermal Spray: Global Solutions for Future Application, Singapore, p 57-6310.31399/asm.cp.itsc2010p0042 ↗
7. W. Tillmann, E. Vogli, J. Nebel, I. Baumann, and B. Krebs, Wear-Protective Cermet Coatings for Forming Tools, Materialwissenschaft und Werkstofftechnik, 2010, 41(7), p 597-60710.1002/mawe.201000647 ↗
8. W. Tillmann, E. Vogli, and B. Krebs, Influence of the Spray Angle on the Characteristics of Atmospheric Plasma Sprayed Hard Material Based Coatings, J. Therm. Spray Technol., 2008, 17(5), p 948-95510.1007/s11666-008-9261-6 ↗
9. B. Krebs, “Near-Net-Shape Component Coatings for Wear Protection by Means of Atmospheric Plasma Spraying and Twin Wire Arc Spraying,” Ph.D. Thesis, TU Dortmund, 2011 (in German)
10. C. Kang, H. Ng, and S. Yu, Imaging Diagnostics Study on Obliquely Impacting Plasma-Sprayed Particles Near to the Substrate, J. Therm. Spray Technol., 2006, 15(1), p 118-13010.1361/105996306X92686 ↗
11. M. M. Fasching, L. E. Weiss, and F. B. Prinz, Optimization of Robotic Trajectories for Thermal Spray Shape Deposition, Proceedings of the 13th International Conference on Thermal Spraying, Thermal Spray: International Advances in Coating Technology, C.C. Berndt, Ed., May 25-June 5, 1992 (Orlando, FL), ASM International, 1992
12. M.M. Fasching, F. Prinz, and L. Weiss, Planning Robotic Trajectories for Thermal Spray Shape Deposition, J. Therm. Spray Technol., 1993, 2(1), p 45-5710.1007/BF02647423 ↗
13. F.I. Trifa, G. Montavon, and C. Coddet, Model-Based Expert System for Design and Simulation of APS Coatings, J. Therm. Spray Technol., 2007, 16(1), p 128-13910.1007/s11666-006-9000-9 ↗
14. A. Arcondéguy, G. Gasgnier, G. Montavon, B. Pateyron, A. Denoirjean, A. Grimaud, and C. Huguet, Effects of Spraying Parameters onto Flame-Sprayed Glaze Coating Structures, Surf. Coat. Technol., 2008, 202(18), p 4444-444810.1016/j.surfcoat.2008.04.024 ↗
15. W. Tillmann and B. Krebs, Robotergestützte, konturgenaue Bauteilbeschichtung für den Verschleißschutz mittels Thermischer Spritzverfahren, Konferenzband „14. Werkstofftechnisches Kolloquium“, B. Wielage, Ed., September 1-2, 2011 (Chemnitz, Germany), p 13-23
16. M.F. Smith, R.A. Neiser, and R.C. Dykhuizen, An Investigation of the Effects of Droplet Impact Angle in Thermal Spray Deposition, Proceedings of the 7th National Thermal Spray Conference, Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, Eds., June 20-24, 1994 (Boston, MA), ASM International, 1994, p 603-608
17. A.V. Zagorski and F. Stadelmaier, Full-Scale Modelling of a Thermal Spray Process, Surf. Coat. Technol., 2001, 146-147, p 162-16710.1016/S0257-8972(01)01372-X ↗
18. F.N. Longo, Coating Processing, Handbook of Thermal Spray Technology, ASM International, Materials Park, OH, 2004, p 108-119