Kinetic Study of the Solid-State Transformation of Vacuum-Plasma-Sprayed Ti-6Al-4V Alloy
Source abstract
Abstract
Because of the nature of the plasma spraying process, the physical and mechanical properties of vacuum-plasma-sprayed structures of Ti-6Al-4V alloy are completely different from those of conventionally manufactured alloys such as bulk materials from casting and forging. To obtain desired mechanical and physical properties, vacancy and internal defects must be reduced, splat boundaries must be eliminated, and optimal phase compositions should be obtained through postdeposition heat treatments. To determine appropriate heat treatment processes, one needs to study the kinetic behavior of the as-sprayed microstructure at elevated temperatures. In the current study, the kinetics of the solid transformations found in Ti-6Al-4V alloys produced during the vacuum plasma spraying process was studied based on the Johnson-Mehl-Avrami theory. For the kinetic behavior of this alloy, the nonconstant temperature dependence of the transformation rate constant exhibits an irregularity at 900 °C, marking a change in the transformation mechanism. For the lower-temperature ( 900 °C), a gradient change indicates a change in the transformation mechanism. The first mechanism was the formation of α-phase grain boundary, and the second mechanism was α-plate nucleation and growth from grain boundaries. The value of the transformation rate constant in the kinetics study of as-sprayed Ti-6Al-4V alloy was much higher than for material produced by the casting method. Using the results obtained from the kinetics of the \( \upbeta \to \upalpha + \upbeta \) phase transformation at different constant temperatures, a time–temperature–transformation (TTT) diagram for as-sprayed Ti-6Al-4V alloy was developed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. S. Tamirisakandala, B.V. Vedam, and R.B. Bhat, Recent Advances in the Deformation Processing of Titanium Alloys, J. Mater. Eng. Perform., 2003, 12, p 661-67310.1361/105994903322692466 ↗
2. S. Malinove, P. Markovsky, and W. Sha, Resistivity Study and Computer Modeling of the Isothermal Transformation Kinetics of Ti-8Al-1Mo-1V Alloy, J. Alloy. Compd., 2002, 333, p 122-13210.1016/S0925-8388(01)01708-X ↗
3. S. Malinove, P. Markovsky, W. Sha, and Z. Guo, Resistivity Study and Computer Modeling of the Isothermal Transformation Kinetics of Ti-6Al-4V, Ti-6Al-2Sn-4Zr-2Mo-0.08Si Alloys, J. Alloy. Compd., 2001, 314, p 181-19210.1016/S0925-8388(00)01227-5 ↗
4. L.M. Gammon, R.D. Briggs, J.M. Packard, K.W. Batson, R. Boyer, and C.W. Domby, Metallography and Microstructures of Titanium and Its Alloys, Metall. Microstruct. ASM Handb. ASM Int., 2004, 9, p 899-917
5. D.M. Stefanescu and R. Ruxanda, Solidification Structures of Titanium Alloys, Metall. Microstruct. ASM Handb. ASM Int., 2004, 9, p 116-126
6. H.R. Salimijazi, T.W. Coyle, and J. Mostaghimi, Vacuum Plasma Spraying: A New Concept for Manufacturing Ti-6Al-4V Structure, JOM, 2006, 58, p 50-5610.1007/s11837-006-0083-z ↗
7. H.R. Salimijazi, T.W. Coyle, and J. Mostaghimi, Understanding Grain Growth and Pore Elimination in Vacuum-Plasma-Sprayed Titanium Alloy, Metall. Mater. Trans. A, 2007, 38A, p 476-484
8. K. Balani, A. Agarwal, and T. Mckechnie, Near Net Shape Fabrication Via Vacuum Plasma Spray Forming, International Symposium of Research Students on Material Science and Engineering, 2004
9. P. Fauchais, Understanding Plasma Spraying, J. Phys. D Appl. Phys., 2004, 37, p 86-10810.1088/0022-3727/37/9/R02 ↗
10. H.R. Salimijazi, M. Raessi, J. Mostaghimi, and T.W. Coyle, Study of Solidification Behavior and Splat Morphology of Vacuum Plasma Sprayed Ti Alloy by Computational Modeling and Experimental Results, Surf. Coat. Technol., 2007, 201, p 7924-793110.1016/j.surfcoat.2007.03.037 ↗
11. H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, Microstructure and Failure Mechanism in As-Deposited Vacuum Plasma Sprayed Ti-6Al-4V Alloy, J. Therm. Spray Technol., 2005, 14(2), p 215-22310.1361/10599630523773 ↗
12. W. Robert Balluffi, M. Samuel Allen, and W. Craig Carter, Kinetics of Materials, Wiley, Hoboken, NJ, 200510.1002/0471749311 ↗
13. A. Kenneth Jackson, Kinetic Processes, Wiley-VCH, Weinheim, 200410.1002/3527603891 ↗