Application of Acoustic Emission Technology for Quantitative Characterization of Plasma-Sprayed Coatings Subjected to Bending Fatigue Tests
Source abstract
Abstract
Plasma-sprayed coatings are widely used in industry, e.g., in applications subject to high wear and corrosion damage, or requiring thermal insulation. However, the failure behavior of such coatings has a great influence on the service safety of mechanical parts. Acoustic emission (AE) has attracted much attention due to its proven usefulness for real-time monitoring of damage evolution and high sensitivity to fracture sources. In this study, the damage evolution behavior of a plasma-sprayed coating subjected to three-point bending fatigue tests was monitored using the AE method. A method combining parameterized, Fourier, and wavelet analysis was used to distinguish the damage modes in the coating. The analysis results revealed two crack modes (surface vertical crack and interface crack) with two different peak frequencies. A finite element method was used to quantify the fracture stress and propagation behavior of cracks, revealing that the thickness of the coating had a strong influence on its spalling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. J. Rodríguez, A. Martín, R. Fernández, and J.E. Fernández, An Experimental Study of the Wear Performance of NiCrBSi Thermal Spray Coatings, Wear, 2003, 255, p 950-95510.1016/S0043-1648(03)00162-5 ↗
2. L. Shepeleva, B. Medres, W.D. Kaplan, M. Bamberger, and A. Weisheit, Laser Cladding of Turbine Blades, Surf. Coat. Technol., 2000, 125, p 45-4810.1016/S0257-8972(99)00603-9 ↗
3. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meierc, and F.S. Pettitc, Mechanisms Controlling the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46, p 505-55310.1016/S0079-6425(00)00020-7 ↗
4. T.W. Clyne and S.C. Gill, Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work, J. Therm. Spray Technol., 1996, 5, p 40110.1007/BF02645271 ↗
5. J.J. Kang, B.S. Xu, H.D. Wang, and C.B. Wang, Competing Failure Mechanism and Life Prediction of Plasma Sprayed Composite Ceramic Coating in Rolling–Sliding Contact Condition, Tribol. Int., 2014, 73, p 128-13710.1016/j.triboint.2014.01.014 ↗
6. I. Hofinger, J. Möller, M. Bobeth, and K. Raab, Effect of Substrate Surface Roughness on the Adherence of NiCrAlY Thermal Spray Coatings, J. Therm. Spray Technol., 2002, 11, p 38710.1361/105996302770348781 ↗
7. X.C. Zhang, B.S. Xu, F.Z. Xuan, S.D. Tu, H.D. Wang, and Y.X. Wu, Fatigue Resistance of Plasma-Sprayed CrC–NiCr Cermet Coatings in Rolling Contact, Appl. Surf. Sci., 2008, 254, p 3734-374410.1016/j.apsusc.2007.11.057 ↗
8. L. Yang, Z.C. Zhong, J. You, Q.M. Zhang, Y.C. Zhou, and W.Z. Tang, Acoustic Emission Evaluation of Fracture Characteristics in Thermal Barrier Coatings under Bending, Surf. Coat. Technol., 2013, 232, p 710-71810.1016/j.surfcoat.2013.06.085 ↗
9. M.R. Begley, D.R. Mumm, A.G. Evans, and J.W. Hutchinson, Analysis of a Wedge Impression Test for Measuring the Interface Toughness between Films/Coatings and Ductile Substrates, Acta Mater., 2000, 48, p 3211-322010.1016/S1359-6454(00)00108-7 ↗
10. M.P.D. Boer and W.W. Gerberich, Microwedge Indentation of the Thin Film Fine Line—I. Mechanics, Acta Mater., 1996, 44, p 3169-317510.1016/1359-6454(95)00426-2 ↗
11. Y. Yamazaki, A. Schmidt, and A. Scholz, The Determination of the Delamination Resistance in Thermal Barrier Coating System by Four-Point Bending Tests, Surf. Coat. Technol., 2006, 201, p 744-75410.1016/j.surfcoat.2005.12.023 ↗
12. Y.C. Zhou, T. Hashida, and C.Y. Jian, Determination of Interface Fracture Toughness in Thermal Barrier Coating System by Blister Tests, J. Eng. Mater. Trans. ASME, 2003, 125, p 176-18210.1115/1.1555658 ↗
13. B.W. Veal, A.P. Paulikas, and P.Y. Hou, Tensile Stress and Creep in Thermally Grown Oxide, Nat. Mater., 2006, 5, p 34910.1038/nmat1626 ↗
14. F. Yu and T.D. Bennett, Phase of Thermal Emission Spectroscopy for Properties Measurements of Delaminating Thermal Barrier Coatings, J. Appl. Phys., 2005, 98, p 10350110.1063/1.2128695 ↗
15. C. Zhang, C. Zhou, H. Peng, S. Gong, and H. Xu, Influence of Thermal Shock on Insulation Effect of Nano-multilayer Thermal Barrier Coatings, Surf. Coat. Technol., 2007, 201, p 6340-634410.1016/j.surfcoat.2006.11.042 ↗
16. D. Renusch and M. Schütze, Measuring and Modeling the TBC Damage Kinetics by Using Acoustic Emission Analysis, Surf. Coat. Technol., 2007, 202, p 740-74410.1016/j.surfcoat.2007.07.109 ↗
17. X.Q. Ma and M. Takemoto, Quantitative Acoustic Emission Analysis of Plasma Sprayed Thermal Barrier Coatings Subjected to Thermal Shock Tests, Mater. Sci. Eng. A Struct., 2001, 308, p 101-11010.1016/S0921-5093(00)01985-7 ↗
18. T.M. Roberts and M. Talebzadeh, Acoustic Emission Monitoring of Fatigue Crack Propagation, J. Constr. Steel Res., 2003, 59, p 695-71210.1016/S0143-974X(02)00064-0 ↗
19. X.Q. Ma, S. Cho, and M. Takemoto, Acoustic Emission Source Analysis of Plasma Sprayed Thermal Barrier Coatings during Four-Point Bend Tests, Surf. Coat. Technol., 2001, 139, p 55-6210.1016/S0257-8972(01)00995-1 ↗
20. R.V. Sagar, B.K.R. Prasad, and S.S. Kumar, An Experimental Study on Cracking Evolution in Concrete and Cement Mortar by the b-Value Analysis of Acoustic Emission Technique, Cem. Concr. Res., 2012, 42, p 1094-110410.1016/j.cemconres.2012.05.003 ↗
21. D. Drozdenko, J. Bohlen, S. Yi, M. Peter, C. František, and D. Patrik, Investigating a Twinning–Detwinning Process in Wrought Mg Alloys by the Acoustic Emission Technique, Acta Mater., 2016, 110, p 103-11310.1016/j.actamat.2016.03.013 ↗
22. A. Kucuk, C.C. Berndt, U. Senturk, and R.S. Lima, Influence of Plasma Spray Parameters on Mechanical Properties of Yttria Stabilized Zirconia Coatings, II: Acoustic Emission, Mater. Sci. Eng. A Struct., 2000, 284, p 41-5010.1016/S0921-5093(00)00800-5 ↗
23. I.M.D. Rosa, C. Santulli, and F. Sarasini, Acoustic Emission for Monitoring the Mechanical Behaviour of Natural Fibre Composites: A Literature Review, Compos. Part A Appl. Sci. Manuf., 2009, 40, p 1456-146910.1016/j.compositesa.2009.04.030 ↗
24. L. Yang, Y.C. Zhou, W.G. Mao, and Q.X. Liu, Acoustic Emission Evaluation of the Fracture Behavior of APS-TBCs Subjecting to Bondcoating Oxidation, Surf. Interface Anal., 2007, 39, p 761-76910.1002/sia.2586 ↗
25. L. Yang, Y.C. Zhou, W.G. Mao, and C. Lu, Real-Time Acoustic Emission Testing Based on Wavelet Transform for the Failure Process of Thermal Barrier Coatings, Appl. Phys. Lett., 2008, 93, p 23190610.1063/1.3043458 ↗
26. L. Yang, Y.C. Zhou, and C. Lu, Damage Evolution and Rupture Time Prediction in Thermal Barrier Coatings Subjected to Cyclic Heating and Cooling: An Acoustic Emission Method, Acta Mater., 2011, 59, p 6519-652910.1016/j.actamat.2011.06.018 ↗
27. P. Seiler, M. Bäker, and J. Rösler, Multi-scale Failure Mechanisms of Thermal Barrier Coating Systems, Comput. Mater. Sci., 2013, 80, p 27-3410.1016/j.commatsci.2013.04.028 ↗
28. X. Li and L. Dong, An Efficient Closed-Form Solution for Acoustic Emission Source Location in Three-Dimensional Structures, AIP Adv., 2014, 4, p 152-160
29. J.G. Ning, L. Chu, and H.L. Ren, A Quantitative Acoustic Emission Study on Fracture Processes in Ceramics Based on Wavelet Packet Decomposition, J. Appl. Phys., 2014, 116, p 3773
30. Y. Sun, J. Li, W. Zhang, and T.J. Wang, Local Stress Evolution in Thermal Barrier Coating System during Isothermal Growth of Irregular Oxide Layer, Surf. Coat. Technol., 2013, 216, p 237-25010.1016/j.surfcoat.2012.11.052 ↗
31. Y. Xu and B.G. Mellor, Application of Acoustic Emission to Detect Damage Mechanisms of Particulate Filled Thermoset Polymeric Coatings in Four Point Bend Tests, Surf. Coat. Technol., 2011, 205, p 5478-548210.1016/j.surfcoat.2011.06.021 ↗
32. D.G. Aggelis, D.V. Soulioti, N.M. Barkoula, A.S. Paipetis, and T.E. Matikas, Influence of Fiber Chemical Coating on the Acoustic Emission Behavior of Steel Fiber Reinforced Concrete, Cemt. Concr. Compos., 2012, 34, p 62-6710.1016/j.cemconcomp.2011.07.003 ↗
33. C.K. Chui and C. Heil, An Introduction to Wavelets, 1st ed., Academic, New York, 1992
34. Z. Suo and J.W. Hutchinson, Interface Crack between Two Elastic Layers, Int. J. Fract., 1990, 43, p 1-1810.1007/BF00018123 ↗
35. S.R. Choi, D. Zhu, and R.A. Miller, Fracture Behavior under Mixed-Mode Loading of Ceramic Plasma-Sprayed Thermal Barrier Coatings at Ambient and Elevated Temperatures, Eng. Fract. Mech., 2005, 72, p 2144-215810.1016/j.engfracmech.2005.01.010 ↗
36. J. Chen and S.J. Bull, Approaches to Investigate Delamination and Interfacial Toughness in Coated Systems: An Overview, J. Phys. D Appl. Phys., 2011, 44, p 03400110.1088/0022-3727/44/3/034001 ↗
37. M.G.R. Sause, F. Haider, and S. Horn, Quantification of Metallic Coating Failure on Carbon Fiber Reinforced Plastics Using Acoustic Emission, Surf. Coat. Technol., 2009, 204, p 300-30810.1016/j.surfcoat.2009.07.027 ↗
38. H. Li, K.A. Khor, and P. Cheang, Young’s Modulus and Fracture Toughness Determination of High Velocity Oxy-Fuel-Sprayed Bioceramic Coatings, Surf. Coat. Technol., 2002, 155, p 21-3210.1016/S0257-8972(02)00026-9 ↗