journal article·2013-03

Multiple-Approach Evaluation of WSP Coatings Adhesion/Cohesion Strength

Radek Mušálek, Václav Pejchal, Monika Vilémová, Jiří Matějíček

Journal of Thermal Spray Technology· Volume 22· Issue 2-3
Publisher page

Abstract

Abstract Adhesion/cohesion testing represents one of the most common methods for benchmarking and optimization of thermal spray coatings. However, due to the inhomogeneous coating microstructure, such testing may be quite troublesome. In this study, adhesion/cohesion strength of representative metallic and ceramic coatings deposited by Water Stabilized Plasma (WSP) spraying was evaluated by different methods, namely Tensile Adhesion Test (TAT), newly utilized pin test and Tubular Coating Tensile (TCT) test. Combination of various methods enabled the evaluation of the splat bonding quality in different loading modes. Limitations and benefits of each method for testing of WSP coatings are demonstrated. Dominating failure micromechanisms were determined by supplementary fractographic analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. J.R. Davis, Handbook of Thermal Spray Technology, ASM International, Materials Park, OH, 2004, p 338
2. G. Marot, J. Lesage, P. Démarécaux, M. Hadad, S. Siegmann, and M.H. Staia, Interfacial Indentation and Shear Tests to Determine the Adhesion of Thermal Spray Coatings, Surf. Coat. Technol., 2006, 201(5), p 2080-208510.1016/j.surfcoat.2006.04.046 ↗
3. “Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings”, ASTM C633-01, ASTM, 2008, 7 pp
4. “Thermal Spraying—Determination of Tensile Adhesive Strength”, EN 582, 1996, CEN, 12 pp
5. S.H. Leigh and C.C. Berndt, A Test for Coating Adhesion on Flat Substrates—A Technical Note, J. Therm. Spray Technol., 1994, 3(2), p 184-19010.1007/BF02648276 ↗
6. C.R.C. Lima and J.M. Guilemany, Adhesion Improvements of Thermal Barrier Coatings with HVOF Thermally Sprayed Bond Coats, Surf. Coat. Technol., 2007, 201(8), p 4694-470110.1016/j.surfcoat.2006.10.005 ↗
7. Y. Wang, C. Li, and A. Ohmori, Influence of Substrate Roughness on the Bonding Mechanisms of High Velocity Oxy-Fuel Sprayed Coatings, Thin Solid Films, 2005, 485(1-2), p 141-14710.1016/j.tsf.2005.03.024 ↗
8. M. Watanabe, S. Kuroda, K. Yokoyama, T. Inoue, and Y. Gotoh, Modified Tensile Adhesion Test for Evaluation of Interfacial Toughness of HVOF Sprayed Coatings, Surf. Coat. Technol., 2008, 202(9), p 1746-175210.1016/j.surfcoat.2007.07.028 ↗
9. “Thermal Spraying—Determination of Shear Load Resistance of Thermally Sprayed Coatings”, EN 15340, 2007, CEN, 15 pp
10. S. Siegmann, M. Dvorak, H. Grützner, K. Nassenstein, and A. Walter, Shear Testing for Characterizing the Adhesive and Cohesive Coating Strength without the Need of Adhesives, Thermal Spray Connects: Explore Its Surfacing Potential!, E. Lugscheider, Ed., May 2-4, 2005, (Basel), DVS Deutscher Verband für Schweißen, 2005, p 823-82910.31399/asm.cp.itsc2005p0823 ↗
11. H. Era, F. Otsubo, T. Uchida, S. Fukuda, and K. Kishitake, A Modified Shear Test for Adhesion Evaluation of Thermal Sprayed Coating, Mater. Sci. Eng. A, 1998, 251(1-2), p 166-17210.1016/S0921-5093(98)00631-5 ↗
12. K. Binder, J. Gottschalk, M. Kollenda, F. Gärtner, and T. Klassen, Influence of Impact Angle and Gas Temperature on Mechanical Properties of Titanium Cold Spray Deposits, J. Therm. Spray Technol., 2011, 20(1-2), p 234-24210.1007/s11666-010-9557-1 ↗
13. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54(3), p 729-74210.1016/j.actamat.2005.10.005 ↗
14. A. Kishi, S. Kuroda, T. Inoue, T. Fukushima, and H. Yumoto, Tensile Test Specimens with a Circumferential Precrack for Evaluation of Interfacial Toughness of Thermal-Sprayed Coatings, J. Therm. Spray Technol., 2008, 17(2), p 228-23310.1007/s11666-008-9168-2 ↗
15. D. Chicot, P. Araujo, N. Horny, A. Tricoteaux, and J. Lesage, Application of the Interfacial Indentation Test for Adhesion Toughness Determination, Surf. Coat. Technol., 2005, 200(1-4), p 174-17710.1016/j.surfcoat.2005.02.045 ↗
16. D. Chicot, P. Démarécaux, and J. Lesage, Apparent Interface Toughness of Substrate and Coating Couples from Indentation Tests, Thin Solid Films, 1996, 283(1-2), p 151-15710.1016/0040-6090(96)08763-9 ↗
17. L.C. Erickson, R. Westergård, U. Wiklund, N. Axén, H.M. Hawthorne, and S. Hogmark, Cohesion in Plasma-Sprayed Coatings—A Comparison between Evaluation Methods, Wear, 1998, 214(1), p 30-3710.1016/S0043-1648(97)00216-0 ↗
18. A. Vencl, S. Arostegui, G. Favaro, F. Zivic, M. Mrdak, S. Mitrović, and V. Popovic, Evaluation of Adhesion/Cohesion Bond Strength of the Thick Plasma Spray Coatings by Scratch Testing on Coatings Cross-Sections, Tribol. Int., 2011, 44(11), p 1281-128810.1016/j.triboint.2011.04.002 ↗
19. C.C. Berndt and C.K. Lin, Measurement of Adhesion for Thermally Sprayed Materials, J. Adhes. Sci. Technol., 1993, 7(12), p 1235-126410.1163/156856193X00088 ↗
20. M. Hadad, M. Hockauf, L.W. Meyer, G. Marot, J. Lesage, R. Hitzek, and S. Siegmann, Adhesion Evaluation of Multilayered Based WC-Co-Cr Thermally Sprayed Coatings, Surf. Coat. Technol., 2008, 202(18), p 4399-440510.1016/j.surfcoat.2008.04.016 ↗
21. M. Hadad, G. Marot, P. Demarecaux, J. Lesage, J. Michler, and S. Siegmann, Adhesion Tests for Thermal Spray Coatings: Application Range of Tensile, Shear and Interfacial Indentation Methods, Thermal Spray Connects: Explore Its Surfacing Potential!, E. Lugscheider, Ed., May 2-4, 2005 (Basel), DVS Deutscher Verband für Schweißen, 2005, p 759-76410.31399/asm.cp.itsc2005p0759 ↗
22. G. Marot, P. Démarécaux, J. Lesage, M. Hadad, S. Siegmann, and M.H. Staia, The Interfacial Indentation Test to Determine Adhesion and Residual Stresses in NiCr VPS Coatings, Surf. Coat. Technol., 2008, 202(18), p 4411-441610.1016/j.surfcoat.2008.04.018 ↗
23. H. Weiss, Adhesion of Advanced Overlay Coatings: Mechanisms and Quantitative Assessment, Surf. Coat. Technol., 1995, 71(2), p 201-20710.1016/0257-8972(94)01022-B ↗
24. D.J. Greving, J.R. Shadley, and E.F. Rybicki, Effects of Coating Thickness and Residual Stresses on the Bond Strength of ASTM C633-79 Thermal Spray Coating Test Specimens, J. Therm. Spray Technol., 1994, 3(4), p 371-37810.1007/BF02658982 ↗
25. R. Mušálek, O. Kovářík, and J. Matějíček, In-situ Observation of Crack Propagation in Thermally Sprayed Coatings, Surf. Coat. Technol., 2010, 205(7), p 1807-181110.1016/j.surfcoat.2010.03.064 ↗
26. M. Vilémová, J. Siegl, J. Matějíček, and R. Mušálek, Effect of the Grit Blasting Exposure Time on the Adhesion of Al2O3 and 316L Coatings, Thermal Spray 2011: Proceedings of the International Thermal Spray Conference, Sept 27-29, 2011 (Hamburg), DVS Deutscher Verband für Schweißen, 2011, p 1001-100610.31399/asm.cp.itsc2011p0979 ↗