Investigations on Particle Behavior at the Stagnation Zone for a Suspension Particle Jet in Plasma Spray Conditions
Source abstract
Abstract
The suspension plasma spray process is now emerging at the industrial scale, and open questions remain regarding the formation of coatings through this process, especially regarding the relationship among particle impact, spreading and build-up into columns. Furthermore, concerns have been raised regarding the behavior of the suspension droplets in the plasma jet stagnation zone since it is a zone where plasma jet streamline directions and velocities are highly disrupted when the plasma jet impinges on a solid surface. In this study, the particle-laden jet streamlines were experimentally observed very closely to a flat surface using a particle image velocimetry technique. Submicron particles were collected in flight to determine which particles contributed to coating growth. The particle mean impact velocity against the surface was determined through image velocimetry and splat dimensions. The impact angles of the particles were also determined, and a correlation was identified with the growth angles of the columnar coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Particle Dynamics in Fluid Flows · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. N. Curry, K. VanEvery, T. Snyder, J. Susnjar and S. Bjorklund, Performance Testing of Suspension Plasma Sprayed Thermal Barrier Coatings Produced with Varied Suspension Parameters, Coatings, 2015, 5(3), p 338-356.10.3390/coatings5030338 ↗
2. X. Chen, S. Kuroda, T. Ohnuki, H. Araki, M. Watanabe and Y. Sakka, Effects of Processing Parameters on the Deposition of Yttria Partially Stabilized Zirconia Coating During Suspension Plasma Spray, J. Am. Ceram. Soc., 2016, 99(11), p 3546-3555.10.1111/jace.14393 ↗
3. B. Bernard, L. Bianchi, A. Malié, A. Joulia and B. Rémy, Columnar Suspension Plasma Sprayed Coating Microstructural Control for Thermal Barrier Coating Application, J. Eur. Ceram. Soc., 2016, 36(4), p 1081-1089.10.1016/j.jeurceramsoc.2015.11.018 ↗
4. D. Zhou, O. Guillon and R. Vaßen, Development of YSZ Thermal Barrier Coatings Using Axial Suspension Plasma Spraying, Coatings, 2017, 7(8), p 120-137.10.3390/coatings7080120 ↗
5. R.C. Seshadri, G. Dwivedi, V. Viswanathan and S. Sampath, Characterizing Suspension Plasma Spray Coating Formation Dynamics through Curvature Measurements, J. Therm. Spray Technol., 2016, 25(8), p 1666-1683.10.1007/s11666-016-0460-2 ↗
6. A. Ganvir, S. Joshi, N. Markocsan and R. Vassen, Tailoring Columnar Microstructure of Axial Suspension Plasma Sprayed TBCs for Superior Thermal Shock Performance, Mater. Des., 2018, 144, p 192-208.10.1016/j.matdes.2018.02.011 ↗
7. K. VanEvery, M.J.M. Krane, R.W. Trice, H. Wang, W. Porter, M. Besser, D. Sordelet, J. Ilavsky and J. Almer, Column Formation in Suspension Plasma-Sprayed Coatings and Resultant Thermal Properties, J. Therm. Spray Technol., 2011, 20, p 817-828.10.1007/s11666-011-9632-2 ↗
8. Y. Zhao, Z. Yu, M.-P. Planche, A. Lasalle, A. Allimant, G. Montavon and H. Liao, Influence of Substrate Properties on the Formation of Suspension Plasma Sprayed Coatings, J. Therm. Spray Technol., 2018, 27, p 73-83.10.1007/s11666-017-0671-1 ↗
9. A. Vardelle, C. Moreau, J. Akedo, H. Ashrafizadeh, C.C. Berndt, J. Oberste Berghaus, M. Boulos, J. Brogan, A.C. Bourtsalas, A. Dolatabadi, M. Dorfman, T.J. Eden, P. Fauchais, G. Fisher, F. Gaertner, M. Gindrat, R. Henne, M. Hyland, E. Irissou, E.H. Jordan, K. Aik Khor, A. Killinger, Y.-C. Lau, C.-J. Li, L. Li, J. Longtin, N. Markocsan, P.J. Masset, J. Matejicek, G. Mauer, A. McDonald, J. Mostaghimi, S. Sampath, G. Schiller, K. Shinoda, M.F. Smith, A. Ansar Syed, N.J. Themelis, F.-L. Toma, J. Pablo Trelles, R. Vassen and P. Vuorist, The 2016 Thermal Spray Roadmap, J. Therm. Spray Technol., 2016, 25(8), p 1376-1440.10.1007/s11666-016-0473-x ↗
10. E. Dalir, A. Dolatabadi and J. Mostaghimi, Modeling of Suspension Plasma Spraying Process Including Arc Movement Inside the Torch, J. Therm. Spray Technol., 2019, 28, p 1105-1125.10.1007/s11666-019-00883-z ↗
11. D. Lapierre, R.J. Kearney, M. Vardelle, A. Vardelle and P. Fauchais, Effect of a Substrate on the Temperature Distribution in an Argon-Hydrogen Thermal Plasma Jet, Plasma Chem. Plasma Process., 1994, 14(4), p 407-423.10.1007/BF01570204 ↗
12. R. Etchart-Salas, V. Rat, J.-F. Coudert, P. Fauchais, N. Caron, K. Wittman and S. Alexandre, Influence of Plasma Instabilities in Ceramic Suspension Plasma Spraying, J. Therm. Spray Technol., 2007, 16(5-6), p 857-865.10.1007/s11666-007-9084-x ↗
13. K. Bobzin, W. Wietheger, M.A. Knoch and S.R. Dokhanchi, Estimation of Particle Mass Flow Rate in Free Jet Using In-Flight Particle Diagnostics in Plasma Spraying, J. Therm. Spray Technol., 2020, 29, p 921-931.10.1007/s11666-020-01027-4 ↗
14. A. Dolmaire, S. Goutier, A. Joulia, P.-M. Geffroy, M. Vardelle and L. Bianchi, Experimental Study of the Impact of Substrate Shape and Tilting on Particle Velocity in Suspension Plasma Spraying, J. Therm. Spray Technol., 2020, 29, p 358-367.10.1007/s11666-019-00977-8 ↗
15. Y. Tanaka and M. Fukumoto, Investigation of Dominating Factors on Flattening Behavior of Plasma Sprayed Ceramic Particles, Surf. Coat. Technol., 1999, 120-121, p 124-130.10.1016/S0257-8972(99)00348-5 ↗
16. M. Bertagnolli, M. Marchese and G. Jacucci, Modeling of Particles Impacting on a Rigid Substrate Under Plasma Spraying Conditions, J. Therm. Spray Technol., 1995, 4(1), p 41-49.10.1007/BF02648527 ↗
17. G. Bidron, S. Goutier, M. Vardelle, P. Denoirjean and P. Fauchais, Flattening Behavior of Micro- and Nano-Sized Yttria-Stabilized Zirconia Particles Plasma-Sprayed on Smooth Preheated (610 K) Nickel Substrate: Part I, J. Phys. Appl. Phys., 2019, 52(16), p 165201. https://doi.org/10.1088/1361-6463/aafd8110.1088/1361-6463/aafd81 ↗
18. C.W. Kang, H.W. Ng and S.C.M. Yu, Imaging Diagnostics Study on Obliquely Impacting Plasma-Sprayed Particles Near to the Substrate, J. Therm. Spray Technol., 2006, 15(1), p 118-130.10.1361/105996306X92686 ↗
19. G. Mauer, Numerical Study on Particle-Gas Interaction Close to the Substrates in Thermal Spray Processes with High-Kinetic and Low-Pressure Conditions, J. Therm. Spray Technol., 2019, 28, p 27-39.10.1007/s11666-018-0810-3 ↗
20. A. Ganvir, R.F. Calinas, N. Markocsan, N. Curry and S. Joshi, Experimental visualization of microstructure evolution during suspension plasma spraying of thermal barrier coatings, J. Eur. Ceram. Soc., 2019, 39(2-3), p 470-481.10.1016/j.jeurceramsoc.2018.09.023 ↗
21. K. Okamoto, T. Hashimoto, K. Hara and E. Tatsumoto, Origin of Magnetic Anisotropy of Iron Films Evaporated at Oblique Incidence, J. Phys. Soc. Jpn., 1971, 31(5), p 1374-1379.10.1143/JPSJ.31.1374 ↗
22. N.G. Nakhodkin and A.I. Shaldervan, Effect of Vapour Incidence Angles on Profile and Properties of Condensed Films, Thin Solid Films, 1972, 10(1), p 109-122.10.1016/0040-6090(72)90276-3 ↗
23. A.G. Dirks and H.J. Leamy, Columnar Microstructure in Vapor-Deposited Thin Films, Thin Solid Films, 1977, 47(3), p 219-233.10.1016/0040-6090(77)90037-2 ↗
24. P. Wang, W. He, G. Mauer, R. Mücke and R. Vaßen, Monte Carlo simulation of column growth in plasma spray physical vapor deposition process, Surf. Coat. Technol., 2018, 335, p 188-197.10.1016/j.surfcoat.2017.12.023 ↗
25. G. Bidron, "Etude physicochimique multi-échelle des interfaces pour la compréhension de l’adhérence d’un dépôt par projection thermique de poudres submicroniques" (Physicochemical multiscale study of splat- substrate interfaces for adhesion understanding in suspensions plasma spraying (SPS)), Ph.D. Thesis, University of Limoges, 2014 (in French)
26. T. Kondo, H. Muta, K. Kurosakin, F. Kargl, A. Yamaji, M. Furuya and Y. Ohishi, Density and Viscosity of Liquid ZrO2 Measured by Aerodynamic Levitation Technique, Heliyon, 2019, 5(7), p e02049. https://doi.org/10.1016/j.heliyon.2019.e0204910.1016/j.heliyon.2019.e02049 ↗
27. B. Bernard, Barrières thermiques par projection plasma de suspensions: développement et caractérisation de microstructures à faible conductivité thermique" (Thermal barrier coatings performed by suspension plasma spraying: Development and characterization of low thermal conductivity microstructures), Ph.D Thesis, Lorraine University, 2016 (in French)
28. B. Bernard, A. Quet, L. Bianchi, V. Schick, A. Joulia, A. Malié and B. Rémy, Effect of Suspension Plasma-Sprayed YSZ Columnar Microstructure and Bond Coat Surface Preparation on Thermal Barrier Coating Properties, J. Therm. Spray Technol., 2017, 26, p 1025-1037.10.1007/s11666-017-0584-z ↗