journal article·2018-02

Phase and Microstructure Evolution and Toughening Mechanism of a Hierarchical Architectured Al2O3–Y2O3 Coating under High Temperature

Jian Rong, Kai Yang, Yin Zhuang, Jinxing Ni, Huayu Zhao, Shunyan Tao, Xinghua Zhong, Chuanxian Ding

Publisher page

Abstract

In recent years, numerous techniques have been developed to mimic nacre-like hierarchical architectures in order to improve the damage tolerance of materials. We present herein a simple strategy to fabricate such a hierarchical architectured Al2O3–Y2O3 composite coating via atmospheric plasma spraying. The evolution of the phase and microstructure of the Al2O3–Y2O3 composite coating were characterized under conditions of high-temperature exposure in air at 800-1350 °C. The hardness and porosity of several typical coatings were determined. In situ formation of dense hierarchical architectured Al2O3–YAG composite coating with improved hardness was achieved after heat treatment at 1350 °C. Compared with Al2O3 coating, elevated toughness was found for the hierarchical architectured Al2O3–YAG composite coating, which can be ascribed to the distribution of YAG phase that contributed to crack termination and deflection, and microbridging. After thermal aging treatment at 1350 °C, the hierarchical architectured Al2O3–YAG composite coating was quite stable after 100 h of thermal exposure. Furthermore, the Al2O3–Y2O3 composite coating exhibited superior sintering resistance compared with the Al2O3 coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Calcium Carbonate Crystallization and Inhibition · Bone Tissue Engineering Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. J.H. Ouyang and S. Sasaki, Tribological Characteristics of Low-Pressure Plasma-Sprayed Al2O3 Coating From Room Temperature to 800 °C, Tribol. Int., 2005, 38, p 49-5710.1016/j.triboint.2004.06.004 ↗
2. K. Yang, J. Rong, C. Liu, H. Zhao, S. Tao, and C. Ding, Study on Erosion–Wear Behavior and Mechanism of Plasma-Sprayed Alumina-based Coatings by a Novel Slurry Injection Method, Tribol. Int., 2016, 93, p 29-3510.1016/j.triboint.2015.09.007 ↗
3. K. Yang, X. Zhou, C. Liu, S. Tao, and C. Ding, Sliding Wear Performance of Plasma-Sprayed Al2O3-Cr2O3 Composite Coatings against Graphite under Severe Conditions, J. Therm. Spray Technol., 2013, 22, p 1154-116210.1007/s11666-013-9959-y ↗
4. Z. Yin, S. Tao, X. Zhou, and C. Ding, Preparation and Characterization of Plasma-Sprayed Al/Al2O3 Composite Coating, Mater. Sci. Eng., 2008, 480, p 580-58410.1016/j.msea.2007.07.009 ↗
5. Y. An, J. Han, X. Zhang, W. Han, Y. Cheng, P. Hu, and G. Zhao, Bioinspired High Toughness Graphene/ZrB2 Hybrid Composites with Hierarchical Architectures Spanning Several Length Scales, Carbon, 2016, 107, p 209-21610.1016/j.carbon.2016.05.074 ↗
6. F. Bouville, E. Maire, S. Meille, B. Van de Moortele, A.J. Stevenson, and S. Deville, Strong, Tough and Stiff Bioinspired Ceramics from Brittle Constituents, Nat. Mater., 2014, 13, p 508-51410.1038/nmat3915 ↗
7. H. Bai, F. Walsh, B. Gludovatz, B. Delattre, C. Huang, Y. Chen, A.P. Tomsia, and R.O. Ritchie, Bioinspired Hydroxyapatite/Poly(methyl methacrylate) Composite with a Nacre-Mimetic Architecture by a Bidirectional Freezing Method, Adv. Mater., 2016, 28, p 50-5610.1002/adma.201504313 ↗
8. R.M. Erb, R. Libanori, N. Rothfuchs, and A.R. Studart, Composites Reinforced in Three Dimensions by Using Low Magnetic Fields, Science, 2012, 335, p 199-20410.1126/science.1210822 ↗
9. W.J. Clegg, K. Kendall, N.M. Alford, T.W. Button, and J.D. Birchall, A Simple Way to Make Tough Ceramics, Nature, 1990, 347, p 455-45710.1038/347455a0 ↗
10. G. Dwivedi, K. Flynn, M. Resnick, S. Sampath, and A. Gouldstone, Bioinspired Hybrid Materials from Spray-Formed Ceramic Templates, Adv. Mater., 2015, 27, p 3073-307810.1002/adma.201500303 ↗
11. H. Su, J. Zhang, W. Ma, K. Wei, L. Liu, H. Fu, S.P. Feng, and A.K. Soh, In Situ Fabrication of Highly-Dense Al2O3/YAG Nanoeutectic Composite Ceramics by a Modified Laser Surface Processing, J. Eur. Ceram. Soc., 2014, 34, p 739-74410.1016/j.jeurceramsoc.2013.10.014 ↗
12. R. Mcpherson, Formation of Metastable Phases in Flame- and Plasma-Prepared Alumina, J. Mater. Sci., 1973, 8, p 851-85810.1007/BF02397914 ↗
13. K. Yang, J. Feng, X. Zhou, and S. Tao, In-Situ Formed γ-Al2O3 Nanocrystals Repaired and Toughened Al2O3 Coating Prepared by Plasma Spraying, Surf. Coat. Technol., 2012, 206, p 3082-308710.1016/j.surfcoat.2011.12.014 ↗
14. V. Gourlaouen, G. Schnedecker, and A.M. Lejus, Metastable Phases in Yttrium Oxide Plasma Spray Deposits and Their Effect on Coating Properties, Mater. Res. Bull., 1993, 28, p 415-42510.1016/0025-5408(93)90123-U ↗
15. X.Y. Cheng and L. Shi, Effect of La2O3 on Microstructure and Sliding Wear Properties of TiC4 Ceramic Coating Produced by Electrical Discharge Method, Surf. Eng., 2013, 23, p 439-44210.1179/174329407X238992 ↗
16. P. Mechnich and W. Braue, Air Plasma-Sprayed Y2O3 Coatings for Al2O3/Al2O3 Ceramic Matrix Composites, J. Eur. Ceram. Soc., 2013, 33, p 2645-265310.1016/j.jeurceramsoc.2013.03.034 ↗
17. J. Liavsky, C.C. Berndt, H. Herman, P. Chraska, and J. Dubsky, Alumina-Base Plasma-Sprayed Materials—Part II, Phase Transformations in Aluminas, J. Therm. Spray Technol., 1997, 6, p 439-44410.1007/s11666-997-0028-2 ↗
18. X. Zhan, Z. Li, B. Liu, J. Wang, Y. Zhou, Z. Hu, and W.Y. Ching, Theoretical Prediction of Elastic Stiffness and Minimum Lattice Thermal Conductivity of Y3Al5O12, YAlO3 and Y4Al2O9, J. Am. Ceram. Soc., 2012, 95, p 1429-143410.1111/j.1551-2916.2012.05118.x ↗
19. Y. Zhou, X. Lu, H. Xiang, and Z. Feng, Preparation, Mechanical, and Thermal Properties of a Promising Thermal Barrier Material: Y4Al2O9, J. Adv. Mater., 2015, 4, p 94-102
20. C.T. Hung, C.Y. Lai, and F.S. Yen, Size Ratio Induced Yttrium Aluminum Garnet Formation Characteristics in Nano-Scaled Y2O3-Al2O3 Powder Systems Via Fast Firing Processes, Mater. Chem. Phys., 2011, 129, p 534-53910.1016/j.matchemphys.2011.04.061 ↗
21. O.I. Get’man, V.V. Panichkina, L.N. Paritskaya, V.V. Skorokhod, A.V. Samelyuk, Y.V. Bykov, and A.G. Eremeev, Effect of Microwave Heating on the Mass Transfer, Phase Formation, and Microstructural Transformations in the Y2O3-Al2O3 Diffusion Couple, Powder Metall. Met. Ceram., 2014, 53, p 12-2510.1007/s11106-014-9582-6 ↗
22. K. Yang, X. Zhou, H. Zhao, and S. Tao, Microstructure and Mechanical Properties of Al2O3-Cr2O3 Composite Coatings Produced by Atmospheric Plasma Spraying, Surf. Coat. Technol., 2011, 206, p 1362-137110.1016/j.surfcoat.2011.08.061 ↗
23. R. Venkataraman and R. Krishnamurthy, Evaluation of Fracture Toughness of as Plasma Sprayed Alumina–13 wt% Titania Coatings by Micro-Indentation Techniques, J. Eur. Ceram. Soc., 2006, 26, p 3075-308110.1016/j.jeurceramsoc.2005.09.054 ↗