Development of a Ni/Al2O3 Cermet-Supported Tubular Solid Oxide Fuel Cell Assembled with Different Functional Layers by Atmospheric Plasma-Spraying
Source abstract
Abstract
A cermet-supported tubular configuration amenable to preparation by a relatively low-cost thermal spraying process is proposed. An Al2O3-Ni cermet thick deposit prepared by flame spraying is employed as both support tube and anode current collector. Atmospheric plasma spraying (APS) has been employed to prepare the anode, cathode, and stabilized ZrO2-based electrolyte with the aim of reducing manufacturing costs. Gas-tightness of the APS electrolyte has been achieved by a postdensification process. The effects of the densification process on the gas-tightness of the plasma-sprayed YSZ electrolyte and the open-circuit voltage of the SOFC have been investigated. The effects of the microstructures of the plasma-sprayed anode, electrolyte, and cathode on the performance of the SOFC test cell have been investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. R.A. George, Status of Tubular SOFC Field Unit Demonstrations. J. Power Sour. 86, 134-139 (2000)10.1016/S0378-7753(99)00413-9 ↗
2. S.C. Singhal, Advances in Solid Oxide Fuel Cell Technology. Solid State Ionics 135, 305-313 (2000)10.1016/S0167-2738(00)00452-5 ↗
3. R.A. Geroge, N.F. Bessette, Reducing the Manufacturing Cost of Tubular SOFC Technology. J. Power Sources, 71, 131-137 (1998)10.1016/S0378-7753(97)02735-3 ↗
4. C.-J. Li, A. Ohmori, Relationship Between the Structure and Properties of Thermally Sprayed Coatings. J. Therm. Spray Technol. 11(3), 365-374 (2002)10.1361/105996302770348754 ↗
5. C.-J. Li, A. Ohmori, R. McPherson, The Relationship Between Microstructure and Young’s Modulus of Thermally Sprayed Ceramic Coatings. J. Mater. Sci., 32, 997-1004 (1997)10.1023/A:1018574221589 ↗
6. A. Ohmori, C.-J. Li, Y. Arata, K. Inoue, N. Iwamoto, Dependence of the Connected Porosity in Plasma Sprayed Ceramic Coatings on Structure. J. Jpn. High Temp. Soc. 16, 332-340 (1990) (in Japanese)
7. M. Fukumoto, K. Negoro, I. Okane, M. Kitoh, S. Fukami, Fabrication of Solid Oxide Fuel Cell Electrodes by Plasma Spraying of Ni/YSZ Mechanically Alloyed Composite Powders. J. Jpn. Inst. Metals 58(1), 50-54 (1994)10.2320/jinstmet1952.58.1_50 ↗
8. K. Barthel, S. Rambert, St. Siegmann, Microstructure and Polarization Resistance of Thermally Sprayed Composite Cathodes for Solid Oxide Fuel Cell Use. J. Therm. Spray Technol. 9(3), 343-347 (2000)10.1361/105996300770349773 ↗
9. L.J.H. Kuo, S.D. Vora, S.C. Singhal, Plasma Spraying of Lanthanum Chromite Films for Solid Oxide Fuel Cell Interconnection Application. J. Am. Ceram. Soc. 80(3), 589-593 (1997)10.1111/j.1151-2916.1997.tb02871.x ↗
10. K. Okumura, Y. Aihara, S. Ito, S. Kawasaki, Development of Thermal Spraying-Sintering Technology for Solid Oxide Fuel Cells. J. Therm. Spray Technol. 9, 354-359 (2000)10.1361/105996300770349791 ↗
11. K.A. Khor, L.G. Yu, S.H. Chan, X.J. Chen, Densification of Plasma Sprayed YSZ Electrolytes by Spark Plasma Sintering (SPS). J. Eur. Ceram. Soc. 23, 1855-1863 (2003)10.1016/S0955-2219(02)00421-1 ↗
12. C-J. Li, C-X. Li, X-J. Ning, Performance of YSZ Electrolyte Layer Deposited by Atmospheric Plasma Spraying for Cermet Supported Tubular SOFC. Vacuum 73, 699-703 (2004)10.1016/j.vacuum.2003.12.096 ↗
13. C-J. Li, X-J. Ning, C-X. Li, Effect of Densification Process on the Properties of Plasma-Sprayed YSZ Electrolyte coatings for Solid Oxide Fuel Cell. Surf. Coat. Technol. 190, 60-64 (2005)10.1016/j.surfcoat.2004.04.086 ↗
14. O. Takayasu, K. Yasuo, M. Akihiko, New Tubular Type SOFC Using Metallic System Components. Denki Kagaku 64(6), 555-561 (1996)10.5796/kogyobutsurikagaku.64.555 ↗
15. K. Yasumoto, N. Mori, J. Mizusaki, H. Tagawa, M. Dokiya, Effect of oxygen nonstoichiometry on electrode activity of La1-xAxMnO3 cathode. J. Electrochem. Soc. 148, A105-111 (2001)10.1149/1.1344524 ↗
16. A. J. Mcevoy, Materials for High-Temperature Oxygen Reduction in Solid Oxide Fuel Cells. J. Mater. Sci. 36, 1087-1096 (2001)10.1023/A:1004861221167 ↗
17. C-J. Li, C-X. Li, M. Wang, Effect of Spray Parameters on the Electrical Conductivity of Plasma-Sprayed La1−x Sr x MnO3 Coating for the Cathode of SOFCs. Surf. Coat. Technol. 198, 278-282 (2005)10.1016/j.surfcoat.2004.10.083 ↗
18. X-J. Ning, C-X. Li, C-J. Li, G-J. Yang, Modification of Microstructure and Electrical Conductivity of Plasma-Sprayed YSZ Deposit Through Post-Densification Process. Maters. Sci. Eng. A 428, 98-105 (2006)10.1016/j.msea.2006.04.104 ↗
19. C-X. Li, X-J. Ning, & C-J. Li, Preparation of YSZ Electrolytic Layer for SOFC by Plasma Spraying Combined with Densification Process. Chin. J. Power Sour. 28(9), 565-569 (2004) (in Chinese)
20. H. Tsukuda, A. Notomi, N. Hisatome, Application of Plasma Spraying to Tubular-Type Solid Oxide Fuel Cells Production. J. Therm. Spray Technol. 9(3), 364-368 (2000)10.1361/105996300770349818 ↗
21. J. Will, A. Mitterdorfer, C. Kleinlogel, D. Perednis, L.J. Gauckler, Fabrication of Thin Electrolytes for Second-Generation Solid Oxide. Solid State Ionics 131, 79-96 (2000)10.1016/S0167-2738(00)00624-X ↗
22. M. Lang, R. Henne, S. Schaper, G. Schiller, Development and Characterization of Vacuum Plasma Sprayed Thin Film Solid Oxide Fuel Cells. J. Therm. Spray Technol. 10(4), 618-625 (2001)10.1361/105996301770349141 ↗
23. R. Henne, Solid Oxide Fuel Cells: A Challenge for Plasma Deposition Processes. J. Therm. Spray Technol. 16(3), 381-403 (2007)10.1007/s11666-007-9053-4 ↗
24. R. Hui, Z.W. Wang, O. Kesler, L. Rose, J. Jankovic, S. Yick, R. Maric, D. Ghosha, Thermal Plasma Spraying for SOFCs: Applications, Potential Advantages and Challenges. J. Power Sour. 170, 308-323 (2007)10.1016/j.jpowsour.2007.03.075 ↗
25. C-J. Li, C-X. Li, Y-Z. Xing, M. Gao, G-J. Yang, Effect of YSZ Electrolyte Thickness on the Characteristics of Plasma-Sprayed Cermet Supported Tubular SOFC. Solid State Ionics 177, 2065-2069 (2006)10.1016/j.ssi.2006.03.004 ↗
26. C-J. Li, C-X. Li, Y-Z. Xing, Y-X. Xie, H-G. Long, Influence of the Characteristics of Stabilized Zirconia Electrolyte on the Performance of Cermet Supported Tubular SOFCs. Rare Metals 25, 273-279 (2006)10.1016/S1001-0521(07)60088-6 ↗
27. Y. Arata, A. Ohmori, C-J. Li, Electrochemical Method to Evaluate the Connected Porosity in Ceramic Coatings. Thin Solid Films 156, 315-325 (1988)10.1016/0040-6090(88)90326-4 ↗