Influence of Surface Finishing on the Oxidation Behaviour of VPS MCrAlY Coatings
Source abstract
Abstract
CoNiCrAlY coatings were produced by means of the vacuum plasma spraying (VPS) process onto CMSX-4 single crystal nickel superalloy disk substrates. As-sprayed samples were annealed at high temperatures in low vacuum. Three kinds of finishing processes were carried out, producing three types of samples: as-sprayed, mechanically smoothed by grinding, ground and PVD coated by using aluminum targets in an oxygen atmosphere. Samples were tested under isothermal conditions, in air, at 1000 °C, and up to 5000 h. Morphological, microstructural and compositional analyses were performed on the coated samples in order to assess the high temperature oxidation behavior provided by the three different surface finishing processes. Several differences were observed: grinding operations decrease the oxidation resistance, whereas the PVD process can increase the performances over longer time with respect of the as-sprayed samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296, p 280-28410.1126/science.1068609 ↗
2. J.R. Nicholls, N.J. Simms, W.Y. Chan, and H.E. Evans, Smart Overlay Coatings—Concept and Practice, Surf. Coat. Technol., 2002, 149(2-3), p 236-24410.1016/S0257-8972(01)01499-2 ↗
3. P.K. Wright and A.G. Evans, Mechanisms Governing the Performance of Thermal Barrier Coatings, Curr. Opin. Solid State Mater. Sci., 1999, 4(3), p 255-26510.1016/S1359-0286(99)00024-8 ↗
4. A. Atkinson, A. Selcuk, and S.J. Webb, Variability of Stress in Alumina Corrosion Layers Formed in Thermal-Barrier Coatings, Oxid. Met., 2000, 54(5-6), p 371-38410.1023/A:1004613332338 ↗
5. B.A. Pint, I.G. Wright, W.Y. Lee, Y. Zhang, K. Prüβner, and K.B. Alexander, Substrate and Bond Coat Compositions: Factors Affecting Alumina Scale Adhesion, Mater. Sci. Eng. A., 1998, 245(2), p 201-21110.1016/S0921-5093(97)00851-4 ↗
6. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit, Mechanis, Controlling, the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46(5), p 505-55310.1016/S0079-6425(00)00020-7 ↗
7. A.G. Evans, D.R. Clarke, and C.G. Levi, The Influence of Oxides on the Performance of Advanced Gas Turbines, J. Eur. Ceram. Soc., 2008, 28, p 1405-141910.1016/j.jeurceramsoc.2007.12.023 ↗
8. P.Y. Hou, Impurity Effects on Alumina Scale Growth, J. Am. Ceram. Soc., 2003, 86, p 660-66810.1111/j.1151-2916.2003.tb03355.x ↗
9. K. Messaoudi, A.M. Huntz, and B. Lesage, Diffusion and Growth Mechanism Of Al2O3 Scales on Ferritic Fe-Cr-Al Alloys, Mater. Sci. Eng. A, 1998, 247(1-2), p 248-26210.1016/S0921-5093(97)00711-9 ↗
10. E.A.G. Shillington and D.R. Clarke, Spalling Failure of a Thermal Barrier Coating Associated with Aluminum Depletion in the Bond-Coat, Acta Mater., 1999, 47, p 1297-130510.1016/S1359-6454(98)00407-8 ↗
11. W. Brandl, H.J. Grabke, D. Toma, and J. Krüger, The Oxidation Behaviour of Sprayed MCrAlY coatings, Surf. Coat. Technol., 1996, 86-87, p 41-4710.1016/S0257-8972(96)03039-3 ↗
12. L. Ajdelsztajn, F. Tang, G.E. Kim, V. Provenzano, and J.M. Schoenung, Synthesis and Oxidation Behavior of Nanocrystalline MCrAlY Bond Coatings, J. Therm. Spray Technol., 2005, 14, p 23-3010.1361/10599630522693 ↗
13. A. Rabiei and A.G. Evans, Failure Mechanisms Associated with the Thermally Grown Oxide in Plasma-Sprayed Thermal Barrier Coating, Acta Mater., 2000, 48(15), p 3963-397610.1016/S1359-6454(00)00171-3 ↗
14. J.L. Smialek, D.T. Jayne, J.C. Schaffer, and W.H. Murphy, Effects of Hydrogen Annealing, Sulfur Segregation and Diffusion on the Cyclic Oxidation Resistance of Superalloys: A Review, Thin Solid Films, 1994, 253(1-2), p 285-29210.1016/0040-6090(94)90335-2 ↗
15. J.A. Haynes, M.K. Ferber, and W.D. Porter, Thermal Cycling Behavior of Plasma-Sprayed Thermal Barrier Coatings with Various Mcraix Bond Coats, J. Therm. Spray Technol., 2000, 9(1), p 38-4810.1361/105996300770350041 ↗
16. A. Peichl, T. Beck, and O. Vöhringer, Behaviour of an EB-PVD Thermal Barrier Coating System Under Thermal-Mechanical Fatigue Loading, Surf. Coat. Technol., 2003, 162(2-3), p 113-11810.1016/S0257-8972(02)00698-9 ↗
17. F.J. Belzunce, V. Higuera, and S. Poveda, High Temperature Oxidation of HFPD Thermal-Sprayed MCrAlY Coatings, Mater. Sci. Eng. A, 2001, 297(1-2), p 162-16710.1016/S0921-5093(00)01239-9 ↗
18. Kh.G. Schmitt-Thomas, H. Haindl, and D. Fu, Modifications of Thermal Barrier Coatings (TBCS), Surf. Coat. Technol., 1997, 94-95, p 149-15410.1016/S0257-8972(97)00493-3 ↗
19. M. Di Ferdinando, A. Fossati, A. Lavacchi, U. Bardi, F. Borgioli, C. Borri, C. Giolli, and A. Scrivani, Isothermal Oxidation Resistance Comparison Between Air Plasma Sprayed, Vacuum Plasma Sprayed and High Velocity Oxygen Fuel Sprayed Conicraly Bond Coats, Surf. Coat. Technol., 2010, 204(15), p 2499-250310.1016/j.surfcoat.2010.01.031 ↗
20. A. Fossati, M. Di Ferdinando, A. Lavacchi, U. Bardi, C. Giolli, and A. Scrivani, Improvement of the Isothermal Oxidation Resistance of Conicraly Coating Sprayed by High Velocity Oxygen Fuel, Surf. Coat. Technol., 2010, 204(21–22), p 3723-372810.1016/j.surfcoat.2010.04.059 ↗
21. H. Choi, B. Yoon, H. Kim, and C. Lee, Isothermal Oxidation of Air Plasma Spray Nicraly Bond Coatings, Surf. Coat. Technol., 2002, 150(2-3), p 297-30810.1016/S0257-8972(01)01557-2 ↗
22. D. Toma, W. Brandl, and U. Köster, Studies on the Transient Stage of Oxidation of VPS and HVOF Sprayed Mcraly Coatings, Surf. Coat. Technol., 1999, 120-121, p 8-1510.1016/S0257-8972(99)00332-1 ↗
23. A. Gil, V. Shemet, R. Vassen, M. Subanovic, J. Toscano, D. Naumenko, L. Singheiser, and W.J. Quadakkers, Effect of Surface Condition on the Oxidation Behaviour of Mcraly Coatings, Surf. Coat. Technol., 2006, 201(7), p 3824-382810.1016/j.surfcoat.2006.07.252 ↗
24. D. Zhang, S. Gong, H. Xu, and Z. Wu, Effect of Bond Coat Surface Roughness on the Thermal Cyclic Behavior of Thermal Barrier Coatings, Surf. Coat. Technol., 2006, 201(3-4), p 649-65310.1016/j.surfcoat.2005.12.027 ↗
25. N. Czech, M. Juez-Lorenzo, V. Kolarik, and W. Stamm, Influence of the Surface Roughness on the Oxide Scale Formation on Mcraly Coatings Studied In Situ by High Temperature X-Ray Diffraction, Surf. Coat. Technol., 1998, 108-109, p 36-4210.1016/S0257-8972(98)00554-4 ↗
26. L. Xie, Y. Sohn, E.H. Jordan, and Maurice. Gell, The Effect of Bond Coat Grit Blasting on the Durability and Thermally Grown Oxide Stress in an Electron Beam Physical Vapor Deposited Thermal Barrier Coating, Surf. Coat. Technol., 2003, 176(1), p 57-6610.1016/S0257-8972(03)00466-3 ↗
27. M.-J. Pindera, J. Aboudi, and S.M. Arnold, The Effect of Interface Roughness and Oxide Film Thickness on the Inelastic Response of Thermal Barrier Coatings to Thermal Cycling, Mater. Sci. Eng. A, 2000, 284(1-2), p 158-17510.1016/S0921-5093(00)00750-4 ↗
28. C. Giolli, F. Borgioli, A. Credi, A. Di Fabio, A. Fossati, M. Muniz Miranda, S. Parmeggiani, G. Rizzi, A. Scrivani, S. Troglio, A. Tolstoguzov, A. Zoppi, and U. Bardi, Characterization of TiO2 Coatings Prepared by a Modified Electric Arc-Physical Vapour Deposition System, Surf. Coat. Technol., 2007, 202(1), p 13-2210.1016/j.surfcoat.2007.04.043 ↗
29. European Patent Application EP 1 624 087 A1
30. M. Lusar, A. Forés, J.A. Badenes, J. Calbo, M.A. Tena, and G. Monrós, Colour Analysis of Some Cobalt-Based Blue Pigments, J. Eur. Ceram. Soc., 2001, 21, p 1121-113010.1016/S0955-2219(00)00295-8 ↗
31. W. Li, J. Li, and J. Guo, Synthesis and Characterization of Nanocrystalline CoAl2O4 Spinel Powder by Low Temperature Combustion, J. Eur. Ceram. Soc., 2003, 23, p 2289-229510.1016/S0955-2219(03)00081-5 ↗
32. J. Petit, P. Dethare, A. Sergent, R. Marino, M.-H. Ritti, S. Landais, J.-L. Lunel, and S. Trombert, Sintering of α-Alumina for Highly Transparent Ceramic Applications, J. Eur. Ceram. Soc., 2011, 31, p 1957-196310.1016/j.jeurceramsoc.2011.04.034 ↗
33. B.-N. Kim, K. Hiraga, K. Morita, and H. Yoshida, Effects of Heating Rate on Microstructure and Transparency of Spark-Plasma-Sintered Alumina, J. Eur. Ceram. Soc., 2009, 29, p 323-32710.1016/j.jeurceramsoc.2008.03.015 ↗
34. T.I. Selinder, E. Coronel, E. Wallin, and U. Helmersson, α-Alumina Coatings on WC/Co Substrates by Physical Vapor Deposition, Int. J. Refract Met. H., 2009, 27, p 507-51210.1016/j.ijrmhm.2008.10.007 ↗
35. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov, Bulk Nanostructured Materials From Severe Plastic Deformation, Prog. Mater. Sci., 2000, 45, p 103-18910.1016/S0079-6425(99)00007-9 ↗
36. W. Österle and P.X. Li, Mechanical and Thermal Response of a Nickel-Base Superalloy Upon Grinding with High Removal Rates, Mater. Sci. Eng. A, 1997, 238, p 357-36610.1016/S0921-5093(97)00457-7 ↗
37. K. Lu and J. Lu, Nanostructured Surface Layer on Metallic Materials Induced by Surface Mechanical Attrition Treatment, Mater. Sci. Eng. A, 2004, 375-377, p 38-4510.1016/j.msea.2003.10.261 ↗
38. F. Tang, L. Ajdelsztajn, G.E. Kim, V. Provenzano, and J.M. Schoenung, Effects of Surface Oxidation During HVOF Processing on the Primary Stage Oxidation of a CoNiCrAlY Coating, Surf. Coat. Technol., 2004, 185(2-3), p 228-23310.1016/j.surfcoat.2003.11.020 ↗
39. A. Gil, D. Naumenko, R. Vassen, J. Toscano, M. Subanovic, L. Singheiser, and W.J. Quadakkers, Y-Rich Oxide Distribution in Plasma Sprayed MCrAlY-Coatings Studied by SEM with a Cathodoluminescence Detector and Raman Spectroscopy, Surf. Coat. Technol., 2009, 204(4), p 531-53810.1016/j.surfcoat.2009.08.034 ↗
40. R. Cueff, H. Buscail, E. Caudron, C. Issartel, and F. Riffard, Oxidation of Alumina Formers at 1173 K: Effect of Yttrium Ion Implantation and Yttrium Alloying Addition, Corr. Sci., 2003, 45(8), p 1815-183110.1016/S0010-938X(02)00254-8 ↗
41. P. Castello, F.H. Stott, and F. Gesmundo, Yttrium-Promoted Selective Oxidation of Aluminium in the Oxidation At 1100°C of an Eutectic Ni-Al-Cr3C2 Alloy, Corr. Sci., 1999, 41(5), p 901-91810.1016/S0010-938X(98)00162-0 ↗
42. A. Fossati, M. Di Ferdinando, A. Lavacchi, A. Scrivani, C. Giolli, and U. Bardi, Improvement of the Oxidation Resistance of CoNiCrAlY Bond Coats Sprayed by High Velocity Oxygen-Fuel onto Nickel Superalloy Substrate, Coatings, 2011, 1, p 3-1610.3390/coatings1010003 ↗
43. G. Lee, A. Atkinson, and A. Selçuk, Development of Residual Stress and Damage in Thermal Barrier Coatings, Surf. Coat. Technol., 2006, 201(7), p 3931-393610.1016/j.surfcoat.2006.08.010 ↗
44. M.P. Taylor and H.E. Evans, The Influence of Bond Coat Surface Roughness and Structure on the Oxidation of a Thermal Barrier Coating System, Mat. Sci. Forum, 2001, 711, p 369-372