journal article·2013-06

Thermal Plasma Spraying Applied on Solid Oxide Fuel Cells

D. Soysal, J. Arnold, P. Szabo, R. Henne, S. A. Ansar

Publisher page

Abstract

Solid oxide fuel cells (SOFCs), attractive for diverse applications in a broad range from small portable and auxiliary power units, up to central power systems, are conventionally produced by sintering methods. However, plasma spraying promises some advantages particularly for cells with metal support. In the present paper, research activities conducted in recent years at DLR as well as latest developments on plasma sprayed functional layers for SOFC as cathodes, electrolytes, and anodes are reported. Power densities of more than 800 mW/cm2 were achieved for plasma sprayed single cells of 12.56 cm2 size, and 300 mW/cm2, respectively, with a 250 W stack made of 10 cells. These values were attained at 0.7 V and 800 °C, with H2:N2 = 1:1 as fuel gas and air as oxidizing gas. Furthermore, continuous operation of more than 5000 h was attained with a plasma sprayed metal-supported SOFC stack which could also withstand more than 30 redox and thermal cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Chemical Looping and Thermochemical Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. H. Gruner and H. Tannenberger, Plasma gespritzte Schichten für Brennstoffzellentechniken [Plasma Sprayed Coatings for Fuel Cell Techniques], DVS-Bericht, 1990, 130, p 194-196 [in German]
2. W. Mallener, K. Wippermann, H. Jansen, Z. Li, and D. Stöver, VPS Fabrication of Electroactive Solid Oxide Fuel Cell Membranes, Thermal Spray: International Advances in Coatings Technology, C. C. Berndt, ASM International (Orlando, FL), 1992, May 25-June 5, 1992, p 835-838
3. R. Henne, E. Fendler, and M. Lang, Potential of Vacuum Plasma Spraying for the Production of SOFC Components, Proceedings of the 1st European Solid Oxide Fuel Cell Conference, Lucerne (Switzerland), 1994, p 612-627
4. T. Franco, Entwicklung und Charakterisierung von anodenseitigen Diffusionsbarriereschichten für metallgetragene oxidkeramische Festelektrolyt-Brennstoffzellen [Development and characterization of Diffusion Barrier Layers for Metal-Supported Solid Oxide Fuel Cells], Stuttgart: epubli, 2009 [in German]
5. J. Arnold, S. A. Ansar, U. Maier, and R. Henne, Insulating and Sealing of SOFC Devices by Plasma Sprayed Ceramic Layers, International Thermal Spray Conference & Exposition, Thermal Spray 2008: Crossing Borders (DVS-ASM) (Maastricht, The Netherlands), 02-04 June 2008, p 83-8710.31399/asm.cp.itsc2008p0083 ↗
6. R. Henne, Solid Oxide Fuel Cells: A Challenge for Plasma Deposition Processes, J. Therm. Spray Technol., 2007, 16(3), p 381-40310.1007/s11666-007-9053-4 ↗
7. J. Arnold and S.A. Ansar, Plasma-Sprayed Coatings in Solid Oxide Fuel Cells, Thermal Spray Bulletin, 2/2012, p 110-116
8. R. Vaßen, D. Hathiramani, J. Mertens, V. Haanappel, and I. Vinke, Manufacturing of High Performance SOFCs with Atmospheric Plasma Spraying (APS), Surf. Coat. Technol., 2007, 202, p 499-50810.1016/j.surfcoat.2007.06.064 ↗
9. J. Arnold, S.A. Ansar, R. Ruckdäschel, R. Henne, U. Maier, and H.W. Grünling, Vacuum Plasma Sprayed Insulating Layers Suitable for Brazing in High Temperature Fuel Cells, Abstracts and Manuscripts of the ITSC-Conference 2011 in Hamburg, No. 276, 27-29 September 2011, p 143-14810.31399/asm.cp.itsc2011p0121 ↗
10. A. Ansar, D. Soysal, Z. Ilhan, and N. Wagner, Plasma Sprayed LSCF Oxygen Electrode for SOFC, International Thermal Spray Conference & Exposition, Thermal Spray 2010: Global Solutions for Future Application (DVS-ASM) (Singapore), 03-05 May 2010, p 108-11310.31399/asm.cp.itsc2010p0108 ↗
11. H. Weckmann, A.A. Syed, Z. Ilhan, and J. Arnold, Development of Porous Anode Layers for the Solid Oxide Fuel Cell by Plasma Spraying, J. Therm. Spray Technol., 2006, 15(4), p 604-60910.1361/105996306X147289 ↗
12. L. Jia, C. Dossou-Yovo, C. Gahlehrt, and F. Gitzhofer, Induction Plasma Spraying of Samarium Doped Ceria as Electrolyte for Solid Oxide Fuel Cells, Thermal Spray 2004: Advances in Technology and Application, ASM International (Osaka, Japan), May 10-12, 2004, p 85-8910.31399/asm.cp.itsc2004p0085 ↗
13. D. Stolten, Hydrogen and Fuel Cells, Wiley-VCH Verlag GmbH & Co KGaA, Weinheim (Germany), 2010
14. S. A. Ansar, Z. Ilhan, and J. Arnold, Plasma Sprayed Metal Supported SOFCs Having Enhanced Performance and Durability, International Thermal Spray Conference, Las Vegas, USA, 200910.31399/asm.cp.itsc2009p0126 ↗
15. C. Christenn and S.A. Ansar, Sprayed and Constrained-Sintered Zirconia Based Electrolytes, Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications, ASM International, May 2009, p 131-13510.31399/asm.cp.itsc2009p0131 ↗
16. M. Garcia-Vargas, L. Lelait, V. Kolarik, H. Fietzek, and Md Mar Juez-Lorenzo, Oxidation of Potential SOFC Interconnect Materials, Crofer 22 APU and Avesta 353 MA, in Dry and Humid Air Studied In Situ by X-ray Diffraction, Mater. High Temp., 2005, 22(3/4), p 245-25110.3184/096034005782744245 ↗
17. M. Marr and O. Kesler, Permeability and Microstructure of Suspension Plasma-Sprayed YSZ Electrolytes for SOFCs on Various Substrates, J. Therm. Spray Technol., 2012, 21(6), p 1334-134610.1007/s11666-012-9829-z ↗
18. Y. Shen, V.A.B. Almeida, and F. Gitzhofer, Preparation of Nanocomposite GDC/LSCF Cathode Material for IT-SOFC by Induction Plasma Spraying, J. Therm. Spray Technol., 2011, 20(1-2), p 145-15310.1007/s11666-010-9583-z ↗
19. S.A. Ansar, Z. Ilhan, G. Schiller, O. Patz, and J.B. Gregoire, Plasma Sprayed Oxygen Electrode for Solid Oxide Fuel Cells and High Temperature Water Electrolyzers, International Thermal Spray Conference & Exposition, Maastricht, The Netherlands, 2008
20. T. Suzuki, Z. Hasan, Y. Funahashi, T. Yamaguchi, Y. Fujishiro, and M. Awano, Impact of Anode Microstructure on Solid Oxide Fuel Cells, Science, 2009, 325(5942), p 852-85510.1126/science.1176404 ↗
21. A. Faes, A. Hessler-Wyser, D. Presvytes, C.G. Vayenas, and J.V. herle, Nickel-Zirconia Anode Degradation and Triple Phase Boundary Quantification from Microstructural Analysis, Fuel Cells, 2009, 09(6), p 841-85110.1002/fuce.200800147 ↗
22. N. Oishi and Y. Yoo, Evaluation of Metal Supported Ceria Based Solid Oxide Fuel Cell Fabricated by Wet Powder Spray and Sintering, J. Electrochem. Soc., 2010, 157(1), p B125-B12910.1149/1.3253653 ↗
23. H. Koide, Y. Someya, T. Yoshida, and T. Maruyama, Properties of Ni/YSZ Cermet as Anode for SOFC, Solid State Ionics, 2000, 132(3-4), p 253-26010.1016/S0167-2738(00)00652-4 ↗
24. A. Vardelle, C. Chazelas, C. Marchand, and G. Mariaux, Modeling Time-Dependent Phenomena in Plasma Spraying of Liquid Precursors, Pure Appl. Chem., 2008, 80(9), p 1981-199110.1351/pac200880091981 ↗
25. A. Saha, S. Seal, B. Cetegen, E. Jordan, A. Ozturk, and S. Basu, Thermo-Physical Processes in Cerium Nitrate Precursor Droplets Injected into High Temperature Plasma, Surf. Coat. Technol., 2009, 203(15), p 2081-209110.1016/j.surfcoat.2008.09.018 ↗
26. C. Marchand, A. Vardelle, G. Mariaux, and P. Lefort, Modelling of the Plasma Spray Process with Liquid Feedstock Injection, Surf. Coat. Technol., 2008, 202(18), p 4458-446410.1016/j.surfcoat.2008.04.027 ↗
27. P. Fauchais, V. Rat, J.-F. Coudert, R. Etchart-Salas, and G. Montavon, Operating Parameters for Suspension and Solution Plasma-Spray Coatings, Surf. Coat. Technol., 2008, 202(18), p 4309-431710.1016/j.surfcoat.2008.04.003 ↗
28. L. Pawlowski, Suspension and Solution Thermal Spray Coatings, Surf. Coat. Technol., 2009, 203(19), p 2807-282910.1016/j.surfcoat.2009.03.005 ↗
29. R. Vaßen, H. Kaßner, G. Mauer, and D. Stöver, Suspension Plasma Spraying: Process Characteristics and Applications, J. Therm. Spray Technol., 2009, 19(1-2), p 219-22510.1007/s11666-009-9451-x ↗
30. P. Fauchais, R. Etchart-Salas, V. Rat, J.F. Coudert, N. Caron, and K. Wittmann-Ténèze, Parameters Controlling Liquid Plasma Spraying: Solutions, Sols, or Suspensions, J. Therm. Spray Technol., 2008, 17(1), p 31-5910.1007/s11666-007-9152-2 ↗
31. A. Bacciochini, G. Montavon, J. Ilavsky, A. Denoirjean, and P. Fauchais, Porous Architecture of SPS Thick YSZ Coatings Structured at the Nanometer Scale (~50 nm), J. Therm. Spray Technol., 2009, 19(1-2), p 198-20610.1007/s11666-009-9429-8 ↗